製品の詳細
The MAX15157B belongs to the family of MAX15157 4-switch, buck–boost controllers. MAX15157B drives two external MOSFETs in half-bridge buck configuration. The output voltage can be dynamically set through the 1V to 2.2V reference input (REFIN) for modular design support.
The switching frequency is controlled either through an external resistor that sets the internal oscillator frequency, or by synchronizing the regulator to an external clock. The device is designed to support 120kHz to 1MHz switching frequencies. The controller has a dedicated undervoltage-lockout pin (UVLO) and an accurate enable-input threshold for flexible power-sequence configuration. The controller also has multiple fault-protection circuits to protect against overcurrent (OCP), output overvoltage (OVP), input UVLO and thermal shutdown.
The MAX15157B features an adjustable internal compensation ramp. The device incorporates an accurate current-sense amplifier that reports output current through an analog output (IMON). The device allows single-phase or multiphase (up to four-phase) operation.
The device is footprint compatible with MAX15157 and is available in a 5mm x 5mm, 32-pin TQFN package and supports a -40°C to +125°C junction temperature range.
主な機能
- Wide Operating Range Reduces Development Time
- 8V to 60V Input-Voltage Range
- 3V to 56V Output-Voltage Range
- 120kHz to 1MHz Switching-Frequency Range
- -40°C to +125°C Temperature Range
- Integration Reduces Design Footprint
- Internal LDO for Bias-Supply Generation
- Synchronization Input
- Current-Monitor Output
- Robust Fault Protection Improves Quality and Simplifies System Design
- Adjustable Input Undervoltage Lockout
- Average and Cycle-by-Cycle Overcurrent Protection
- Input Undervoltage-Fault Protection
- Multiple Levels of Overvoltage Protection
- Thermal Shutdown
- Adjustable Slope Compensation
- Multiphase Support
- Small 5mm x 5mm, 32-pin TQFN, 0.5mm Pitch
アプリケーション/用途
- 車載用
- 通信
- 産業用
VIN (V) (min) | 8 |
VIN (V) (max) | 60 |
VOUT1 (V) (min) | 3 |
VOUT1 (V) (max) | 56 |
Switch Type | External |
Output Adjust. Method | Dyn. REF In Resistor |
Synchronous Switching? | Yes |
Power Good Signal | Yes |
# DC-DC Outputs | 1 |
Switching Frequency (kHz) | 1000 |
Design Tools | EE-Sim |
Package/Pins | TQFN/32 |
Budgetary Price (See Notes) | $2.57 @1k |
VIN (V) (min) | 8 |
VIN (V) (max) | 60 |
VOUT1 (V) (min) | 3 |
VOUT1 (V) (max) | 56 |
Switch Type | External |
Output Adjust. Method | Dyn. REF In Resistor |
Synchronous Switching? | Yes |
Power Good Signal | Yes |
# DC-DC Outputs | 1 |
Switching Frequency (kHz) | 1000 |
Design Tools | EE-Sim |
Package/Pins | TQFN/32 |
Budgetary Price (See Notes) | $2.57 @1k |
技術資料
データシート | 60V Current-Mode Buck Controller with Accurate Current Report | Oct 06, 2020 | |
デザインソリューション | Simplify Your Data Center's 48V-to-12V Power Conversion |
以下タイトルをクリックして詳細をご覧ください。
説明
The MAX15157B evaluation kit (EV kit) is a fully assembled and tested circuit board that contains all components necessary to evaluate the performance of the MAX15157B. The device is a high-efficiency step-down and/or step-up regulator. The EV kit is powered from a 15V to 60V DC supply. It is capable of delivering from 5V to 32V at 15A or 200W (max) and at a 600kHz switching frequency. Refer to the MAX15157B data sheet to set the switching frequency and input/output voltage ranges for the EV kit.
詳細を見る特長
- 15V to 60V Input-Voltage Range (Changeable from 8V to 60V)
- 5V to 32V Output-Voltage Range (Changeable from 3V to 52V)
- Adjustable Slope Compensation Ramp
- Precision High-Side Current Sense for Output Current Monitor
- Multiphase Operation Up to 4 Phases
- Adjustable Switching Frequency: 120kHz to 1MHz Range
- External Switching Frequency Clock Synchronization
- External REFIN Input for Output Adjustment
- Hiccup Fault Protection for Overcurrent
- Thermal Shutdown
- POW-OK Output (Power-Good Output)
- Adjustable Input UVLO, and Output OVP Voltage
- Adjustable Soft-Start, and Soft-Stop
- Monotonic Startup into Prebiased Output
![]() | ツールおよびモデル EE-Sim: 設計およびシミュレーションMAX15157B | デザインを作成する |
パラメーター
VIN (V) (min) | 8 |
VIN (V) (max) | 60 |
VOUT1 (V) (min) | 3 |
VOUT1 (V) (max) | 56 |
Switch Type | External |
Output Adjust. Method | Dyn. REF In Resistor |
Synchronous Switching? | Yes |
Power Good Signal | Yes |
# DC-DC Outputs | 1 |
Switching Frequency (kHz) | 1000 |
Design Tools | EE-Sim |
Package/Pins | TQFN/32 |
Budgetary Price (See Notes) | $2.57 @1k |
主な機能
- Wide Operating Range Reduces Development Time
- 8V to 60V Input-Voltage Range
- 3V to 56V Output-Voltage Range
- 120kHz to 1MHz Switching-Frequency Range
- -40°C to +125°C Temperature Range
- Integration Reduces Design Footprint
- Internal LDO for Bias-Supply Generation
- Synchronization Input
- Current-Monitor Output
- Robust Fault Protection Improves Quality and Simplifies System Design
- Adjustable Input Undervoltage Lockout
- Average and Cycle-by-Cycle Overcurrent Protection
- Input Undervoltage-Fault Protection
- Multiple Levels of Overvoltage Protection
- Thermal Shutdown
- Adjustable Slope Compensation
- Multiphase Support
- Small 5mm x 5mm, 32-pin TQFN, 0.5mm Pitch
アプリケーション/用途
- 車載用
- 通信
- 産業用
説明
The MAX15157B belongs to the family of MAX15157 4-switch, buck–boost controllers. MAX15157B drives two external MOSFETs in half-bridge buck configuration. The output voltage can be dynamically set through the 1V to 2.2V reference input (REFIN) for modular design support.
The switching frequency is controlled either through an external resistor that sets the internal oscillator frequency, or by synchronizing the regulator to an external clock. The device is designed to support 120kHz to 1MHz switching frequencies. The controller has a dedicated undervoltage-lockout pin (UVLO) and an accurate enable-input threshold for flexible power-sequence configuration. The controller also has multiple fault-protection circuits to protect against overcurrent (OCP), output overvoltage (OVP), input UVLO and thermal shutdown.
The MAX15157B features an adjustable internal compensation ramp. The device incorporates an accurate current-sense amplifier that reports output current through an analog output (IMON). The device allows single-phase or multiphase (up to four-phase) operation.
The device is footprint compatible with MAX15157 and is available in a 5mm x 5mm, 32-pin TQFN package and supports a -40°C to +125°C junction temperature range.
技術資料
データシート | 60V Current-Mode Buck Controller with Accurate Current Report | Oct 06, 2020 | |
デザインソリューション | Simplify Your Data Center's 48V-to-12V Power Conversion |