製品の詳細
主な特長
アプリケーション/用途
Reset Thresh. (V) | 1.2 to 1.8 |
Reset Out | Active High Active Low Push-Pull |
ICC (µA) (max) | 4000 |
Oper. Temp. (°C) | -55 to +125 -40 to +85 0 to +70 |
Package/Pins | CDIP/16 PDIP/16 SOIC (W)/16 |
Budgetary Price (See Notes) | 5.96 |
簡易ブロック図
Technical Docs
データシート | マイクロプロセッサ監視回路 | Aug 01, 2014 |
サポートとトレーニング
技術質問への回答についてはナレッジベースで検索ください。
絞り込まれた検索マキシムでは、お客様の技術的質問にお答えするため、アプリケーションエンジニアの専任チームも配置しています。 サポートセンター をご利用ください。
サンプルについて:
サンプルは、外部のADI Sample Siteでのご注文となります。選択したパーツはSample Siteログイン後、カートに引き継がれます。Sample Siteを初めて使用する際は、アカウント登録をお願いいたします。Sample Siteに関するご質問は、SampleSupport@analog.comまでお問合せください。
パラメーター
Reset Thresh. (V) | 1.2 to 1.8 |
Reset Out | Active High Active Low Push-Pull |
ICC (µA) (max) | 4000 |
Oper. Temp. (°C) | -55 to +125 -40 to +85 0 to +70 |
Package/Pins | CDIP/16 PDIP/16 SOIC (W)/16 |
Budgetary Price (See Notes) | 5.96 |
主な特長
- Adjustable Low-Line Monitor and Power-Down Reset
- Power-OK/Reset Time Delay
- Watchdog Timer—100ms, 1.6s, or Adjustable
- Minimum Component Count
- 1µA Standby Current
- Battery-Backup Power Switching (MAX696)
- On-Board Gating of Chip-Enable Signals (MAX697)
- Separate Monitor for Power-Fail or Low-Battery Warning
アプリケーション/用途
- コンピュータ
- コントローラ
- クリティカルなµPの電源監視
- インテリジェント機器
説明
The MAX696 and MAX697 are supplied in 16-pin packages and perform six functions:
- A reset output during power-up, power-down, and brownout conditions. The threshold for this "lowline" reset is adjustable by an external voltage-divider.
- A reset pulse if the optional watchdog timer has not been toggled within a specified time.
- Individual outputs for low-line and watchdog fault conditions.
- The reset time may be left at its default value of 50ms, or may be varied with an external capacitor or clock pulses.
- A separate 1.3V threshold detector for power-fail warning, low-battery detection, or to monitor a power supply other than VCC.
The MAX697 lacks battery-backup switching, but has write-protection pins (active-low CE IN and active-low CE OUT) for CMOS RAM or EPROM. In addition, it consumes less than 250 microamperes.
Technical Docs
データシート | マイクロプロセッサ監視回路 | Aug 01, 2014 |
サポートとトレーニング
技術質問への回答についてはナレッジベースで検索ください。
絞り込まれた検索マキシムでは、お客様の技術的質問にお答えするため、アプリケーションエンジニアの専任チームも配置しています。 サポートセンター をご利用ください。
サンプルについて:
サンプルは、外部のADI Sample Siteでのご注文となります。選択したパーツはSample Siteログイン後、カートに引き継がれます。Sample Siteを初めて使用する際は、アカウント登録をお願いいたします。Sample Siteに関するご質問は、SampleSupport@analog.comまでお問合せください。