製品の詳細
主な特長
アプリケーション/用途
VIN (V) (min) | 4.5 |
VIN (V) (max) | 36 |
Max. No. of LEDs | 8 |
# LED Channels | 1 |
Regulation Topology | Inductor Based |
LED Configuration | Series |
ILED per Channel (A) (max) | 10 |
PWM Dimming Freq. (kHz) (max) | 1 |
Dimming Ratio (max) | 1000 |
Dimming Control | I2C Serial PWM |
VCURR_SENSE (mV) | 200 |
POUT (W) | 100 |
ICC (mA) (max) | 7 |
LED String Volt. (V) (max) | 35 |
Switching Frequency (kHz) | 420 1000 1600 2100 |
Package/Pins | TQFN-CU/28 |
Budgetary Price (See Notes) | 3.87 |
簡易ブロック図
Technical Docs
データシート | Automotive IR LED/VCSEL Driver for Driver Monitoring Systems | Mar 02, 2022 |
パラメーター
VIN (V) (min) | 4.5 |
VIN (V) (max) | 36 |
Max. No. of LEDs | 8 |
# LED Channels | 1 |
Regulation Topology | Inductor Based |
LED Configuration | Series |
ILED per Channel (A) (max) | 10 |
PWM Dimming Freq. (kHz) (max) | 1 |
Dimming Ratio (max) | 1000 |
Dimming Control | I2C Serial PWM |
VCURR_SENSE (mV) | 200 |
POUT (W) | 100 |
ICC (mA) (max) | 7 |
LED String Volt. (V) (max) | 35 |
Switching Frequency (kHz) | 420 1000 1600 2100 |
Package/Pins | TQFN-CU/28 |
Budgetary Price (See Notes) | 3.87 |
主な特長
- Integration Minimizes BOM and PCB Area
- Integrated Switching nFET
- Integrated pFET with Inrush Current Limit
- I2C Programming Controls
- Comprehensive Fault Protection Including Eye Safety
- LED Current Monitoring, Overcurrent Protection
- LED Short-to-Ground/Battery Protection
- LED Open Protection
- Boost Under/Overvoltage Protection
- Thermal Warning and Shutdown
- EMI Mitigation
- Spread-Spectrum Frequency Modulation
- Programmable LED Current Slew Rate
- Automotive Ready
- -40°C to +125°C Operating Temperature Range
- AEC-Q100 Grade 1 and ASIL-B Qualified
アプリケーション/用途
- Automotive Driver Monitoring System (DMS)
- Automotive Occupant Monitoring System (OMS)
- Night Vision
- Optical Inspection/Machine Vision
説明
The MAX25614 is a high-current IR LED/VCSEL driver for automotive driver monitoring systems (DMS). This IC can drive IR LED/VCSEL strings of up to 35V from a 4.5V to 36V input supply. The MAX25614 can drive up to 10A peak current to the IR emitter. It is designed for applications where the IR emitter is pulsed on and off, typically at 60Hz or the shutter speed of the corresponding image sensor. The MAX25614A/MAX25614B use fixed-frequency, average current-mode control with programmable switching frequency options of 420kHz, 1MHz, 1.6MHz, and 2.1MHz. Both an inrush current-limiting pFET and a low-side switching nFET are integrated.
The MAX25614A/MAX25614B incorporate an I2C serial interface for communication with an external microcontroller. I2C programming options include: LED current amplitude, LED current slew rate, boost converter output voltage, boost converter input current, switching frequency, maximum LED current, and maximum LED on-time. Additionally, the MAX25614A/MAX25614B provide fault and diagnostic information through the I2C interface. Analog-controlled variants are available as well, and are described in the MAX25614C/MAX25614D data sheet.;
A dedicated current-monitoring circuit is integrated to provide instantaneous and average LED current information to the microcontroller. The MAX25614 has an open-drain fault output that asserts low in case of open LED, LED overcurrent, excessive LED on-time, LEDN short to battery, boost UV/OV, inrush current-limiting pFET timeout, or thermal warning/shutdown. The MAX25614 is available in a 28-pin, side-wettable TQFN package with exposed pad and is specified for operation over the -40°C to +125°C automotive temperature range.
簡易ブロック図
Technical Docs
データシート | Automotive IR LED/VCSEL Driver for Driver Monitoring Systems | Mar 02, 2022 |