先頭に戻る

Automotive I2C-Controlled 4-Channel 150mA Backlight Driver and 4-Output TFT-LCD Bias

Industry's First Automotive TFT Bias with 4-Channel LED Driver

製品の詳細

主な特長

Parametric specs for LED Drivers
VIN (V) (min) 4.5
VIN (V) (max) 42
Max. No. of LEDs 56
# LED Channels 4
Regulation Topology Inductor Based
LED Configuration Series-Parallel
ILED per Channel (A) (max) 0.15
PWM Dimming Freq. (kHz) (max) 20
Dimming Ratio (max) 10000
Dimming Control I2C Serial
PWM
POUT (W) 40
ICC (mA) (max) 10
LED String Volt. (V) (max) 52
Switching Frequency (kHz) 400
2200
Package/Pins TQFN-CU/40
Budgetary
Price (See Notes)
0
Parametric specs for Multifunction PMICs
VIN (V) (min) 2.7
VIN (V) (max) 3.6
# Step-Down Outputs 2
# Step-Up Outputs 2
# Inverting Outputs 1
VOUT (V) (min) -24
VOUT (V) (max) 36
Package/Pins TQFN-CU/40
Budgetary
Price (See Notes)
0
非表示にする

簡易ブロック図

Technical Docs

サポートとトレーニング

技術質問への回答についてはナレッジベースで検索ください。

絞り込まれた検索

マキシムでは、お客様の技術的質問にお答えするため、アプリケーションエンジニアの専任チームも配置しています。 サポートセンター をご利用ください。

パラメーター

Parametric specs for LED Drivers
VIN (V) (min) 4.5
VIN (V) (max) 42
Max. No. of LEDs 56
# LED Channels 4
Regulation Topology Inductor Based
LED Configuration Series-Parallel
ILED per Channel (A) (max) 0.15
PWM Dimming Freq. (kHz) (max) 20
Dimming Ratio (max) 10000
Dimming Control I2C Serial
PWM
POUT (W) 40
ICC (mA) (max) 10
LED String Volt. (V) (max) 52
Switching Frequency (kHz) 400
2200
Package/Pins TQFN-CU/40
Budgetary
Price (See Notes)
0
Parametric specs for Multifunction PMICs
VIN (V) (min) 2.7
VIN (V) (max) 3.6
# Step-Down Outputs 2
# Step-Up Outputs 2
# Inverting Outputs 1
VOUT (V) (min) -24
VOUT (V) (max) 36
Package/Pins TQFN-CU/40
Budgetary
Price (See Notes)
0

主な特長

  • 4-Output TFT-LCD Bias Power
    • 2.8V to 5.5V Input for the TFT-LCD Section
    • Integrated 440kHz or 2.2MHz Boost and Buck-Boost Converters
    • Positive and Negative 3mA Gate Voltage Regulators with Adjustable Output Voltage
    • Flexible Resistor-Programmable Sequencing through the SEQ Pin
    • Undervoltage Detection on All Outputs
    • Low-Quiescent-Current Standby Mode
  • 4-Channel LED Backlight Driver
    • Up to 150mA Current per Channel
    • 4.5V to 42V Input Voltage Range
    • Integrated Boost/SEPIC Controller (440kHz or 2.2MHz)
    • Dimming Ratio 10,000:1 at 200Hz
    • Adaptive Voltage Optimization to Reduce Power Dissipation in the LED Current Sinks
    • Open-String, Shorted-LED, and Short-to-GND Diagnostics
  • Low EMI
    • Phase-Shift Dimming of LED Strings
    • Spread Spectrum on LED Driver and TFT
    • Selectable Switching Frequency
  • I2C Interface for Control and Diagnostics
    • Fault Indication through the FLTB pin and I2C
  • Overload and Thermal Protection
  • -40°C to +105°C Ambient Temperature Operation
  • 40-Pin (6mm x 6mm) TQFN Package with Exposed Pad

アプリケーション/用途

  • Automotive Central Information Displays
  • Automotive Dashboards
  • Automotive Head Up Displays
  • Automotive Navigation System

説明

The MAX20069C is a highly integrated TFT power supply and LED backlight driver IC for automotive TFT-LCD applications. The IC integrates one buck-boost converter, one boost converter, two gate-driver supplies, and a boost/SEPIC converter that can power one to four strings of LEDs in the display backlight.

The source-driver power supplies consist of a synchronous boost converter and an inverting buck-boost converter that can generate voltages up to +18V and down to -7V. The positive source driver can deliver up to 120mA, while the negative source driver is capable of 100mA. The positive source-driver supply-regulation voltage (VPOS) is set by connecting an external resistor-divider on FBP or through I2C. The negative source-driver supply voltage (VNEG) is always tightly regulated to -VPOS (down to a minimum of -7V). The source-driver supplies operate from an input voltage between 2.8V and 5.5V.

The gate-driver power supplies consist of regulated charge pumps that generate from +28V to -21.5V and can deliver up to 3mA each.

The IC features a quad-string LED driver that operates from a separate input voltage (VBATT) and can power up to four strings of LEDs with 150mA (max) of current per string. The IC features logic-controlled pulse-width-modulation (PWM) dimming, with minimum pulse widths as low as 500ns with the option of phase shifting the LED strings with respect to one another. When phase shifting is enabled, each string is turned on at a different time, reducing the input and output ripple, as well as audible noise. With phase shifting disabled, the current sinks turn on simultaneously and parallel connection of current sinks is possible.

The startup and shutdown sequences for all power domains are controlled using one of the seven preset modes, which are selectable through a resistor on the SEQ pin or through the I2C interface.

The MAX20069C is available in a 40-pin (6mm x 6mm) TQFN package with an exposed pad, and operates over the -40°C to +105°C ambient temperature range.

簡易ブロック図

Technical Docs

サポートとトレーニング

技術質問への回答についてはナレッジベースで検索ください。

絞り込まれた検索

マキシムでは、お客様の技術的質問にお答えするため、アプリケーションエンジニアの専任チームも配置しています。 サポートセンター をご利用ください。