先頭に戻る

Automotive 6-Channel Backlight Driver with Boost/SEPIC Controller and I2C Interface

6-Channel 120mA LED Driver Provides Full Diagnostics and Hybrid Dimming thru I2C

製品の詳細

主な特長

アプリケーション/用途

Parametric specs for LED Drivers
VIN (V) (min) 4.5
VIN (V) (max) 36
Max. No. of LEDs 44
# LED Channels 6
Regulation Topology Inductor Based
LED Configuration Series-Parallel
ILED per Channel (A) (max) 0.13
PWM Dimming Freq. (kHz) (max) 200
Dimming Ratio (max) 20000
Dimming Control Analog
I2C Serial
PWM
POUT (W) 32
ICC (mA) (max) 10
LED String Volt. (V) (max) 52
Switching Frequency (kHz) 500
700
750
1000
1200
1500
2000
2100
2200
Package/Pins TQFN-CU/24
Budgetary
Price (See Notes)
2.99
全て表示する

簡易ブロック図

サポートとトレーニング

技術質問への回答についてはナレッジベースで検索ください。

絞り込まれた検索

マキシムでは、お客様の技術的質問にお答えするため、アプリケーションエンジニアの専任チームも配置しています。 サポートセンター をご利用ください。

パラメーター

Parametric specs for LED Drivers
VIN (V) (min) 4.5
VIN (V) (max) 36
Max. No. of LEDs 44
# LED Channels 6
Regulation Topology Inductor Based
LED Configuration Series-Parallel
ILED per Channel (A) (max) 0.13
PWM Dimming Freq. (kHz) (max) 200
Dimming Ratio (max) 20000
Dimming Control Analog
I2C Serial
PWM
POUT (W) 32
ICC (mA) (max) 10
LED String Volt. (V) (max) 52
Switching Frequency (kHz) 500
700
750
1000
1200
1500
2000
2100
2200
Package/Pins TQFN-CU/24
Budgetary
Price (See Notes)
2.99

主な特長

  • Wide-Voltage-Range Operation
    • Operates Down to 4V Supply After Startup
    • Survives Load Dump Up to 52V
  • High Integration
    • Complete 6-Channel Solution Including Boost Controller
    • I2C Control for Minimum Parts Count
  • Robust and Low EMI
    • Spread-Spectrum Oscillator
    • Phase Shifting
    • 400kHz to 2.2MHz Switching-Frequency Range
    • Fail-Safe Operation Mode Using the FSEN Pin
  • Versatile Dimming Scheme Allows Hybrid or PWM-Only Dimming Using DIM Input or I2C
    • Dimming Ratio > 10000:1 Using Hybrid Dimming
    • 10000:1 Dimming Ratio at 200Hz using PWM Dimming
  • Complete Diagnostics
    • LED Open/Short Detection and Protection
    • Boost Output Undervoltage and Overvoltage
    • Boost Voltage
    • Individual String LED Current
    • Thermal Shutdown
  • Compact (4mm x 4mm) 24-Pin TQFN Package

アプリケーション/用途

  • Central Information Displays
  • Infotainment Displays
  • Instrument Clusters

説明

The MAX20446 is a 6-channel backlight driver with boost controller for automotive displays. The integrated current outputs can sink up to 130mA LED current each. The device accepts a wide 4.5V to 36V input voltage range and withstands direct automotive load-dump events.

The internal current-mode switching DC-DC controller supports boost or SEPIC topologies and operates in the frequency range 400kHz to 2.2MHz. Integrated spread spectrum helps reduce EMI. An adaptive output-voltage control scheme minimizes power dissipation in the LED current-sink paths.

The device features I2C-controlled pulse-width modulation (PWM) dimming and hybrid dimming. In either case the minimum pulse width is 500ns. Phase-shifted dimming of the strings is incorporated for lower EMI.

Comprehensive diagnostic information is also available via the I2C interface.

The MAX20446 is available in a TQFN package and operates in the -40°C to 125°C temperature range.

Design Solution: Overcome the Design Challenges of New Automotive Display Backlights ›

簡易ブロック図

MAX20446: Typical Application Circuit MAX20446: Typical Application Circuit Zoom icon

サポートとトレーニング

技術質問への回答についてはナレッジベースで検索ください。

絞り込まれた検索

マキシムでは、お客様の技術的質問にお答えするため、アプリケーションエンジニアの専任チームも配置しています。 サポートセンター をご利用ください。