先頭に戻る ![]()
DS3882
Dual-Channel CCFL Controller
Low Component Count, Feature-Rich, Automotive Inverter Solution
MyMaxim のご登録製品の詳細
主な特長
アプリケーション/用途
簡易ブロック図
Technical Docs
| データシート | Dual-Channel CCFL Controller | Jan 05, 2011 | |
| アプリケーションノート | Why and How to Implement a Frequency Boost During a CCFL Lamp Strike on the DS3881/DS3882 | ||
| アプリケーションノート | CCFLプッシュ/プルスナバ回路 | ||
| アプリケーションノート | DS39xx CCFLコントローラによるアナログ調光の実装 | ||
| アプリケーションノート | CCFLコントローラDS3xxxのためのLCMとOVDスレッショルドの決定 | ||
| チュートリアル | How to Achieve a 300:1 Dimming Ratio with the DS3881/DS3882 CCFL Controllers | ||
| チュートリアル | How to Prevent Flicker Caused by Burst Dimming |
主な特長
- Dual-Channel CCFL Controllers for Backlighting LCD Panels and Instrument Clusters in Navigation/Infotainment Applications
- Minimal External Components Required
- I²C Interface
- Per-Channel Lamp-Fault Monitoring for Lamp-Open, Lamp-Overcurrent, Failure to Strike, and Overvoltage Conditions
- Status Register Reports Fault Conditions
- Accurate (±5%) Independent On-Board Oscillators for Lamp Frequency (40kHz to 100kHz) and DPWM Burst-Dimming Frequency (22.5Hz to 440Hz)
- Lamp and DPWM Frequencies can be Synchronized with External Sources to Reduce Visual LCD Artifacts in Video Applications
- Optional Spread-Spectrum Lamp Clock Reduces EMI
- Lamp Frequency can be Stepped Up or Down to Move EMI Spurs Out of Band
- Lamp Current Overdrive Mode with Automatic Turn-Off Quickly Warms Lamp in Cold Temperatures
- Analog and Digital Brightness Control
- 300:1 Dimming Range Possible Using the Digital Brightness Control Option
- Programmable Soft-Start Minimizes Audible Transformer Noise
- On-Board Nonvolatile (NV) Memory Allows Device Customization
- 8-Byte NV User Memory for Storage of Serial Numbers and Date Codes
- Low-Power Standby Mode
- 4.75V to 5.25V Single-Supply Operation
- Temperature Range: -40°C to +105°C
- 28-Pin TSSOP Package
アプリケーション/用途
- Instrument Clusters
- Marine and Aviation LCDs
説明
The DS3882 is a dual-channel cold-cathode fluorescent lamp (CCFL) controller for applications that provides up to 300:1 dimming. It is ideal for driving CCFLs used to backlight liquid crystal displays (LCDs) in navigation and infotainment applications and for driving CCFLs used to backlight instrument clusters. The DS3882 is also appropriate for use in marine and aviation applications.
The DS3882 features EMI suppression functionality and provides a lamp current overdrive mode for rapid lamp heating in cold weather conditions. The DS3882 supports configurations of 1 or 2 lamps with fully independent lamp control and minimal external components. Multiple DS3882 controllers can be cascaded to support applications requiring more than 2 lamps. Control of the DS3882, after initial programming setup, can be completely achieved through I²C software communication. Many DS3882 functions are also pin-controllable if software control is not desired.
The DS3882 features EMI suppression functionality and provides a lamp current overdrive mode for rapid lamp heating in cold weather conditions. The DS3882 supports configurations of 1 or 2 lamps with fully independent lamp control and minimal external components. Multiple DS3882 controllers can be cascaded to support applications requiring more than 2 lamps. Control of the DS3882, after initial programming setup, can be completely achieved through I²C software communication. Many DS3882 functions are also pin-controllable if software control is not desired.
Technical Docs
| データシート | Dual-Channel CCFL Controller | Jan 05, 2011 | |
| アプリケーションノート | Why and How to Implement a Frequency Boost During a CCFL Lamp Strike on the DS3881/DS3882 | ||
| アプリケーションノート | CCFLプッシュ/プルスナバ回路 | ||
| アプリケーションノート | DS39xx CCFLコントローラによるアナログ調光の実装 | ||
| アプリケーションノート | CCFLコントローラDS3xxxのためのLCMとOVDスレッショルドの決定 | ||
| チュートリアル | How to Achieve a 300:1 Dimming Ratio with the DS3881/DS3882 CCFL Controllers | ||
| チュートリアル | How to Prevent Flicker Caused by Burst Dimming |
見積もり請求