先頭に戻る

3A Buck Charger with ModelGauge m5 Fuel Gauge and USB BC1.2 Detection

全機能内蔵、シングルチップバッテリマネージメントソリューション、1セルUSBアプリケーション用

製品の詳細

主な特長

Parametric specs for Battery Chargers
Charging VIN (V) (max) 14
Max. ICHG (A) 3.15
Cell Chemistry Li-Ion
Li-Polymer
# Lithium Ion Cells 1
Protected VIN (V) (max) 16
Charger (V) 3.65 to 4.7
Oper. Temp. (°C) -40 to +85
Package/Pins WLP/81
Budgetary
Price (See Notes)
0
Parametric specs for USB Charger Detectors
Protocol BC1.2
VSUPPLY (Single) (V) (min) 4
VSUPPLY (Single) (V) (max) 14
Supported USB Battery Charging Specification BC1.2
ESD Protection ±15kV HBM
Package/Pins WLP/81
Budgetary
Price (See Notes)
0
非表示にする
Parametric specs for Battery Fuel Gauges, Protectors, and Monitors
Functions Charger
Fuel Gauge
USB Detection
Battery Type 1 Cell Li-Ion
Fuel Gauge Algorithm ModelGauge m5
Interface 2-Wire
Parameters Measured Current
State of Charge
Temperature
Voltage
End Equipment Host
VSUPPLY (V) (min) 4
VSUPPLY (V) (max) 14
Package/Pins WLP/81
Oper. Temp. (°C) -40 to +85
Budgetary
Price (See Notes)
0
非表示にする

簡易ブロック図

Technical Docs

サポートとトレーニング

技術質問への回答についてはナレッジベースで検索ください。

絞り込まれた検索

マキシムでは、お客様の技術的質問にお答えするため、アプリケーションエンジニアの専任チームも配置しています。 サポートセンター をご利用ください。

パラメーター

Parametric specs for Battery Chargers
Charging VIN (V) (max) 14
Max. ICHG (A) 3.15
Cell Chemistry Li-Ion
Li-Polymer
# Lithium Ion Cells 1
Protected VIN (V) (max) 16
Charger (V) 3.65 to 4.7
Oper. Temp. (°C) -40 to +85
Package/Pins WLP/81
Budgetary
Price (See Notes)
0
Parametric specs for USB Charger Detectors
Protocol BC1.2
VSUPPLY (Single) (V) (min) 4
VSUPPLY (Single) (V) (max) 14
Supported USB Battery Charging Specification BC1.2
ESD Protection ±15kV HBM
Package/Pins WLP/81
Budgetary
Price (See Notes)
0
Parametric specs for Battery Fuel Gauges, Protectors, and Monitors
Functions Charger
Fuel Gauge
USB Detection
Battery Type 1 Cell Li-Ion
Fuel Gauge Algorithm ModelGauge m5
Interface 2-Wire
Parameters Measured Current
State of Charge
Temperature
Voltage
End Equipment Host
VSUPPLY (V) (min) 4
VSUPPLY (V) (max) 14
Package/Pins WLP/81
Oper. Temp. (°C) -40 to +85
Budgetary
Price (See Notes)
0

主な特長

  • Single-Input Switch Mode Charger
  • Up to 16V Protection
    • Up to 13.4V Input Operating Range
    • Up to 4.0A Input Current Limit with Adaptive Input Current Limiting (AICL)
    • Up to 3.15A Battery Charging Current Limit
    • CC, CV, and Die Temperature Control
    • Small Inductor: 0.47µH or 1µH Package
    • High Efficiency
  • Supports USB-OTG Reverse Boost, up to 1.5A Current Limit (Programmable)
  • Integrated Battery True-Disconnect FET
    • RDS(ON) = 12.8mΩ
    • Rated Up to 9ARMS, Discharge Current Limit (Programmable, Default 4.5A)
  • Adapter Type Detection
    • D+/D- Detection for USB port, USB DCP, and USB HVDCP
    • BC 1.2 Compliant
  • ModelGauge m5 Battery Fuel Gauge
    • ±1% SOC Accuracy, No Calibration Cycles, Very Low IQ
    • Time-to-Empty and Time-to-Full Prediction
  • One Safeout LDO
  • Control Functions
    • Shipping Mode with ONKEY Pressing Clear
    • True Hardware Reset with ONKEY
  • I2C 3.0 Compatible Interface with Interrupt Output
  • 3.87mm x 3.96mm, 9 x 9 Array WLP with 0.4mm Pitch

アプリケーション/用途

  • 産業用PC
  • ポータブル医療機器
  • モバイルPOS機器
  • ワイヤレススピーカー
  • 電子タバコ
  • スマートホームオートメーション、センサー
  • モノのインターネット(IoT)

説明

The MAX77840 is a 3.15A switched-mode charger and ModelGauge™ fuel gauge with integrated USB BC1.2 detection for Li-ion batteries and a SAFEOUT LDO.

The charger integrates all switches and operates at either 4MHz or 2MHz (programmable) switching frequency, allowing selection of the smallest external components or achieving lowest heat dissipation. The MAX77840 is ideally suited for devices such as mobile point-of-sale devices, portable medical electronics, or other handheld devices. It includes the USB BC1.2 detection function to recognize common USB adapters and set the input current limit automatically. The MAX77840 can supply up to 1.5A OTG current with proprietary MAXOTG protection, that limits the OTG output current to prevent system voltage from collapsing under heavy OTG loads.

The ModelGauge m5 provides accurate battery fuel gauging and operates with extremely low battery current (25µA, typ) during standby or sleep mode to extend battery life. The interaction between the ModelGauge m5 and the charger provides end users a superior charging experience in a single IC.

Shipping mode is built into the MAX77840 to minimize battery drain when the device is not in use. The MAX77840 features an I2C 3.0 compatible serial interface. It is offered in a 3.87mm x 3.96mm, 9 x 9 bump array wafer-level package (WLP) with 0.4mm pitch.

簡易ブロック図

MAX77840: Simplified Block Diagram MAX77840: Simplified Block Diagram Zoom icon

Technical Docs

サポートとトレーニング

技術質問への回答についてはナレッジベースで検索ください。

絞り込まれた検索

マキシムでは、お客様の技術的質問にお答えするため、アプリケーションエンジニアの専任チームも配置しています。 サポートセンター をご利用ください。