The MAX3341E/MAX3342E USB transceivers convert logic-level signals to USB signals, and USB signals to logic-level signals. An internal 1.5k? USB termination resistor supports full-speed (12Mbps) USB operation. The MAX3341E/MAX3342E provide built-in ±15kV ESD-protection circuitry on the USB I/O pins, D+ and D-, and VCC.
The MAX3341E/MAX3342E operate with logic supply voltages as low as 1.8V, ensuring compatibility with low-voltage ASICs. The suspend mode lowers supply current to less than 50µA. A unique enumerate feature allows changes in USB communication protocol while power is applied. The MAX3341E/MAX3342E are fully compliant with USB specification 1.1, and full-speed operation under USB specification 2.0.
The MAX3341E/MAX3342E have a USB detect that monitors the USB bus for insertion and signals this event. The MAX3341E USB_DET threshold is between 3.7V (min) and 4V (max), while the MAX3342E USB_DET threshold is between 1V (min) and 2.8V (max).
The MAX3341E/MAX3342E are available in the miniature 4 5 4 UCSP, as well as the small 16-pin TSSOP, and are specified over the extended temperature range, -40°C to +85°C.
±15kV ESD Protection On D+ and D-
Comply with USB Standard 1.1 (Full Speed 2.0)
USB Skew Independent of Input Skew
Separate VP and VM Inputs/Outputs
VL Down to 1.8V Allows Connection with Low-Voltage ASICs
Reenumerate with Power Applied
USB Detect Function
3.7V (min) to 4V (max)MAX3341E
1V (min) to 2.8V (max)MAX3342E
Allow Single-Ended or Differential Logic I/O
Internal Linear Regulator Allows Direct Powering from the USB
Internal Termination Resistor for Full-Speed Operation