/
/
/
/
デジタル-アナログコンバータ(DAC) 
/
先頭に戻る
Maxim Confidential 
MyMaxim のご登録製品の詳細
主な特長
アプリケーション/用途
Parametric specs for High-Speed DACs (≥ 1MHz)
| Resolution (bits) | 10 |
| # Channels | 1 |
| fCLK (Msps) | 40 |
| SFDR (dBc) (@ fOUT) | 70 @ 2.2MHz |
| THD (dBc) (@ fOUT) | -68 @ 2.2MHz |
| DNL (±LSB) | 0.5 |
| INL (±LSB) | 0.5 |
| PDISS (mW) | 17.7 |
| Interface | Parallel |
| VSUPPLY (V) | 3 |
| Package/Pins | QSOP/24 |
| Budgetary Price (See Notes) | 3.53 |
全て表示する
簡易ブロック図
技術資料
| データシート | 10ビット、40MHz、電流/電圧出力DAC | Sep 13, 2010 |
パラメーター
Parametric specs for High-Speed DACs (≥ 1MHz)
| Resolution (bits) | 10 |
| # Channels | 1 |
| fCLK (Msps) | 40 |
| SFDR (dBc) (@ fOUT) | 70 @ 2.2MHz |
| THD (dBc) (@ fOUT) | -68 @ 2.2MHz |
| DNL (±LSB) | 0.5 |
| INL (±LSB) | 0.5 |
| PDISS (mW) | 17.7 |
| Interface | Parallel |
| VSUPPLY (V) | 3 |
| Package/Pins | QSOP/24 |
| Budgetary Price (See Notes) | 3.53 |
主な特長
- 2.7V to 3.3V Single-Supply Operation
- Wide Spurious-Free Dynamic Range: 70dB at fOUT = 2.2MHz
- Fully Differential Output
- Low-Current Standby or Full Shutdown Modes
- Internal 1.2V, Low-Noise Bandgap Reference
- Small 24-Pin QSOP and Thin QFN Packages
アプリケーション/用途
- 任意波形発生器(AWG)
- ダイレクトデジタル合成(DDS)
- 画像処理
- 信号再生
説明
The MAX5181 is a 10-bit, current-output digital-to-analog converter (DAC) designed for superior performance in signal reconstruction or arbitrary waveform generation applications requiring analog signal reconstruction with low distortion and low-power operation. The MAX5184 provides equal specifications, with on-chip precision resistors for voltage-output operation. The MAX5181/MAX5184 are designed for a 10pV-s glitch operation to minimize unwanted spurious signal components at the output. An on-board 1.2V bandgap circuit provides a well-regulated, low-noise reference that can be disabled for external reference operation.
The devices are designed to provide a high level of signal integrity for the least amount of power dissipation. They operate from a single 2.7V to 3.3V supply. Additionally, these DACs have three modes of operation: normal, low-power standby, and full shutdown, which provides the lowest possible power dissipation with a 1µA (max) shutdown current. A fast wake-up time (0.5µs) from standby mode to full DAC operation facilitates power conservation by activating the DAC only when required.
The MAX5181/MAX5184 are available in 24-pin QSOP packages and are specified for the extended (-40°C to +85°C) temperature range. Additionally, the MAX5184 is also available in a 24-pin TQFN with exposed pad (EP) and is specified for the extended (-40°C to +85°C) temperature range. For lower resolution, 8-bit versions, refer to the MAX5187/MAX5190 data sheet.
The devices are designed to provide a high level of signal integrity for the least amount of power dissipation. They operate from a single 2.7V to 3.3V supply. Additionally, these DACs have three modes of operation: normal, low-power standby, and full shutdown, which provides the lowest possible power dissipation with a 1µA (max) shutdown current. A fast wake-up time (0.5µs) from standby mode to full DAC operation facilitates power conservation by activating the DAC only when required.
The MAX5181/MAX5184 are available in 24-pin QSOP packages and are specified for the extended (-40°C to +85°C) temperature range. Additionally, the MAX5184 is also available in a 24-pin TQFN with exposed pad (EP) and is specified for the extended (-40°C to +85°C) temperature range. For lower resolution, 8-bit versions, refer to the MAX5187/MAX5190 data sheet.
技術資料
| データシート | 10ビット、40MHz、電流/電圧出力DAC | Sep 13, 2010 |
見積もり請求