製品の詳細
主な特長
アプリケーション/用途
Analog Input/Output | Analog Input |
Interface Type | SPI |
# Channels | 12 |
Input Resolution (bits) | 24 |
Oper. Temp. (°C) | -40 to +125 |
Package/Pins | THIN LGA HYBRID/34 |
Budgetary Price (See Notes) | 8.04 |
簡易ブロック図
Technical Docs
データシート | 12-Channel Factory-Calibrated Configurable Industrial-Analog Input | Sep 03, 2021 | |
アプリケーションノート | MAX22005 User Programming Guide | ||
アプリケーションノート | MAX22005 Configurable Analog Input Enables Flexible Industrial Control Systems | ||
アプリケーションノート | MAX22005 User Calibration Guide | ||
カタログ | Building Automation Brochure |
サポートとトレーニング
技術質問への回答についてはナレッジベースで検索ください。
絞り込まれた検索マキシムでは、お客様の技術的質問にお答えするため、アプリケーションエンジニアの専任チームも配置しています。 サポートセンター をご利用ください。
サンプルについて:
サンプルは、外部のADI Sample Siteでのご注文となります。選択したパーツはSample Siteログイン後、カートに引き継がれます。Sample Siteを初めて使用する際は、アカウント登録をお願いいたします。Sample Siteに関するご質問は、SampleSupport@analog.comまでお問合せください。
パラメーター
Analog Input/Output | Analog Input |
Interface Type | SPI |
# Channels | 12 |
Input Resolution (bits) | 24 |
Oper. Temp. (°C) | -40 to +125 |
Package/Pins | THIN LGA HYBRID/34 |
Budgetary Price (See Notes) | 8.04 |
主な特長
- Enables More Robust and Reliable Systems
- ±36V High-Voltage Protection for All Input Ports
- 2kV HBM ESD Protection of All Pins
- ±2kV Surge Protection (with External 5kΩ Resistor)
- CRC Detection for Robust Serial Communication
- Watchdog Timer
- Software Configurability
- ±12.5V Analog Input-Voltage Mode
- ±25mA Analog Input-Current Mode Using External Sense Resistor
- Configurable Inputs Using External Sense Resistor and Low-Cost Switches
- Best-in-Class System Accuracy
- 0.02% FSR at 25°C Factory Calibrated
- 0.05% FSR over ±50°C from 25°C Factory Calibration
- Maximum of 30nA Input Leakage
- 5ppm/°C Internal Reference
- Additional Features
- Internal or External ADC Reference
- Eight GPIO Ports
- 48.5mW Low Power Dissipation with ±5V Supply
- 30MHz SPI/QSPI/DSP-Compatible Serial Interface
- Operating Temperature -40°C to +125°C
- 7.5mm × 7mm 48-pin LGA package
アプリケーション/用途
- プログラマブルロジックコントローラ(PLC)
- プログラマブルオートメーションコントローラ(PAC)
- 分散制御システム(DCS)
説明
The MAX22005 is a twelve-channel industrial-grade analog input voltage-mode device that can also be configured as analog-input current-mode device using an external precision resistor per channel. It can also operate as configurable analog-input using an external precision resistor and low-cost switch per channel. Input channels can be used as twelve single-ended inputs, or six differential inputs, or up to eight multichannel configurable differential inputs. In total, the device supports up to 26 different configurations
The MAX22005 features an integrated 24-bit delta-sigma ADC that is shared between all channels. The ADC can be used with either an integrated 5ppm/°C precision reference or an external reference. Standard industrial analog input voltage ranges are converted to the ADC input voltage range using high-voltage, zero-drift input amplifiers. All input ports are robustly protected up to ±36V reverse polarity and ±1.5kV surge pulses without the need of TVS diodes.
Eight general-purpose digital I/O (GPIO) ports are available for common use, or they can be used to control external switches for configurable inputs.
The MAX22005 is factory calibrated with best-in-class system performance of less than 0.05% FSR Total-Unadjusted-Error (TUE) over temperature.
The host communicates with the MAX22005 through a high-speed 30MHz SPI bus for all configurations and information management, as well as for acquiring conversion results. An optional 8-bit CRC enhances the reliability of the SPI interface, protecting against all 8-bit bursts, as well as all double-bit errors.
The MAX22005 operates from 2.7V to 3.6V analog and digital supplies, and up to ±24V high-voltage supplies.
The MAX22005 is available in 48-pin LGA package and operates over the -40°C to +125°C industrial temperature range.Technical Docs
データシート | 12-Channel Factory-Calibrated Configurable Industrial-Analog Input | Sep 03, 2021 | |
アプリケーションノート | MAX22005 User Programming Guide | ||
アプリケーションノート | MAX22005 Configurable Analog Input Enables Flexible Industrial Control Systems | ||
アプリケーションノート | MAX22005 User Calibration Guide | ||
カタログ | Building Automation Brochure |
サポートとトレーニング
技術質問への回答についてはナレッジベースで検索ください。
絞り込まれた検索マキシムでは、お客様の技術的質問にお答えするため、アプリケーションエンジニアの専任チームも配置しています。 サポートセンター をご利用ください。
サンプルについて:
サンプルは、外部のADI Sample Siteでのご注文となります。選択したパーツはSample Siteログイン後、カートに引き継がれます。Sample Siteを初めて使用する際は、アカウント登録をお願いいたします。Sample Siteに関するご質問は、SampleSupport@analog.comまでお問合せください。