先頭に戻る
MyMaxim のご登録製品の詳細
主な特長
アプリケーション/用途
Parametric specs for Operational Amplifiers
| Unity Gain BW (MHz) (typ) | 0.044 |
| Input IBIAS (nA) (max) | 0.05 |
| VOS (µV) (max) | 2000 |
| VSUPPLY (Total) (V) (min) | 2 |
| VSUPPLY (Total) (V) (max) | 16 |
| # Amplifiers | 2 |
| Rail to Rail | Output Only |
| Package/Pins | PDIP/14 |
| Budgetary Price (See Notes) | 2.52 |
全て表示する
簡易ブロック図
パラメーター
Parametric specs for Operational Amplifiers
| Unity Gain BW (MHz) (typ) | 0.044 |
| Input IBIAS (nA) (max) | 0.05 |
| VOS (µV) (max) | 2000 |
| VSUPPLY (Total) (V) (min) | 2 |
| VSUPPLY (Total) (V) (max) | 16 |
| # Amplifiers | 2 |
| Rail to Rail | Output Only |
| Package/Pins | PDIP/14 |
| Budgetary Price (See Notes) | 2.52 |
主な特長
- Pin-for-Pin Second Source
- 1pA Typical Bias Current—4nA (max) at +125°C
- ±1V to ±8V Wide Supply Voltage Range
- Industry-Standard Pinouts
- Programmable Quiescent Currents of 10µA, 100µA, and 1000µA
- Monolithic, Low-Power CMOS Design
アプリケーション/用途
- バッテリ駆動機器
- 補聴器およびマイクロフォンアンプ
- 長時間定数積算器
- 低ドループレートサンプル/ホールドアンプ
- 低周波アクティブフィルタ
- 低リークアンプ
- ピコアンメータ
説明
The ICL761X–ICL764X family of monolithic CMOS op amps combine ultra-low input current with low-power operation over a wide supply voltage range. With pinselectable quiescent currents of 10µA, 100µA, or 1000µA per amplifier, these op amps will operate from ±1V to ±8V power supplies, or from single supplies from 2V to 16V. The CMOS outputs swing to within millivolts of the supply voltages.
The ultra-low bias current of 1pA makes this family of op amps ideal for long time constant integrators, picoammeters, low droop rate sample/hold amplifiers and other applications where input bias and offset currents are critical. A low noise current of 0.01pA
and an input impedance of 1012Ω ensure optimum performance with very high source impedances in such applications as pH meters and photodiode amplifiers.
The ultra-low bias current of 1pA makes this family of op amps ideal for long time constant integrators, picoammeters, low droop rate sample/hold amplifiers and other applications where input bias and offset currents are critical. A low noise current of 0.01pA
and an input impedance of 1012Ω ensure optimum performance with very high source impedances in such applications as pH meters and photodiode amplifiers. 
見積もり請求