システムボード 5996

MPOS-STD2: Turnkey PCI-PTS Mobile POS (MPOS) Terminal



Introduction

MPOS-STD2 is a complete Mobile POS reference platform that embeds a color TFT display, keypad, mag stripe reader, smartcard reader, Bluetooth®, contactless interface, and LiPo rechargeable battery. The device is a complete MPOS-in-a-box solution that has been pre-evaluated by security labs for compliance with PCI-PTS 4.0 standards. It is a full turnkey solution that comes with an extensive hardware and software bundle that includes all the pieces required to successfully modify, adapt, build, program, certify, and manufacture a Mobile POS terminal and thus, in large quantities.

The MPOS-STD2 reference design is based on the MAX32550 Secure Flash-based Cortex® M3 microcontroller that embeds most of the peripherals and analog interfaces required to operate a Mobile POS with a limited number of external components.

A block diagram of the system is shown in Figure 1.


Mobile POS (MPOS) Terminal 拡大表示+

The MPOS-STD2 reference design block diagram.

Secure Microcontroller ESD Protection Step-Up/Down Converter DC-DC Step-Up Converter USB Charger ESD Protection

Features

  • 320 x 320 graphical color TFT display
  • 12-key patented secure keypad
  • 2-track magnetic card reader
  • EMV-L1 smartcard reader
  • Contactless reader
  • USB full-speed device port
  • Bluetooth® 4.0 controller
  • Secure Flash-based Cortex M3 microcontroller
  • Rechargeable lithium polymer battery
  • Lithium backup battery
  • -10°C to +40°C operating range
  • -40°C to +85°C storage range
  • Support and certification assistance

Applications

  • MPOS
  • Pin pads

Benefits

  • Quick time to market
  • Reduced R&D expense
  • Accelerated certification
  • Secure supply chain

Introduction

MPOS-STD2 is a complete Mobile POS reference platform that embeds a color TFT display, keypad, mag stripe reader, smartcard reader, Bluetooth®, contactless interface, and LiPo rechargeable battery. The device is a complete MPOS-in-a-box solution that has been pre-evaluated by security labs for compliance with PCI-PTS 4.0 standards. It is a full turnkey solution that comes with an extensive hardware and software bundle that includes all the pieces required to successfully modify, adapt, build, program, certify, and manufacture a Mobile POS terminal and thus, in large quantities.

The MPOS-STD2 reference design is based on the MAX32550 Secure Flash-based Cortex® M3 microcontroller that embeds most of the peripherals and analog interfaces required to operate a Mobile POS with a limited number of external components.

A block diagram of the system is shown in Figure 1.


Mobile POS (MPOS) Terminal 拡大表示+

The MPOS-STD2 reference design block diagram.

Secure Microcontroller ESD Protection Step-Up/Down Converter DC-DC Step-Up Converter USB Charger ESD Protection

Features

  • 320 x 320 graphical color TFT display
  • 12-key patented secure keypad
  • 2-track magnetic card reader
  • EMV-L1 smartcard reader
  • Contactless reader
  • USB full-speed device port
  • Bluetooth® 4.0 controller
  • Secure Flash-based Cortex M3 microcontroller
  • Rechargeable lithium polymer battery
  • Lithium backup battery
  • -10°C to +40°C operating range
  • -40°C to +85°C storage range
  • Support and certification assistance

Applications

  • MPOS
  • Pin pads

Benefits

  • Quick time to market
  • Reduced R&D expense
  • Accelerated certification
  • Secure supply chain

Request Information on the MPOS-STD2 Mobile POS Reference Design

Detailed Description of the Reference Design

Features

  • MAX32550 Secure Microcontroller:
    • 108MHz 32-bit ARM® Cortex M3 core with MPU
    • 256KB of SRAM
    • 1MB of Flash
    • 64KB of ROM
    • 4KB of OTP
    • 8KB of encryptable NVSRAM
  • External memory (optional):
    • 1MB external SPI flash (optional)
  • User Interface:
    • 320 x 240 dots graphic color TFT with backlight
    • 12-key patented secure keypad
  • Magnetic Card Reader:
    • 2-tracks magnetic card reader
  • Smartcard Reader:
    • EMV Level 1 4.2, ISO7816, 3V/1.8V/5V support, T=0 and T=1 protocols
  • Contactless Reader:
    • NXP CLRC633 interface
  • Connectivity:
    • USB device from MAX32550
    • Bluetooth 4.0, PAN1026 complete certified module
  • Environmental
    • Operating temperature range from -10°C to +40°C
    • Storage temperature range from -40°C to +85°C
  • Dimensions
    • 121mm x 75mm x 17.25mm (L x W x H)
  • Power
    • 3.7V/230mAh Lithium Polymer rechargeable through USB
    • 125mAh MNO2 battery backup
    • MAX8934 USB charger
    • MAX8625 step-up/down converter
    • MAX1723 step-up DC-DC converter for 5V smart cards
  • ESD protection
    • 2 x MAX13204 ESD protections on USB and magnetic head

Deliverables

  Description
Software Development environment
Full BSP package
Cryptographic library
Demo application
Documentation Schematic and hardware
PCI-PTS 4.0 evaluation report
Development environment user guide
Evaluation kit user guide
Support Technical support
Certification assistance
Schematic & PCB Schematics
Layout
PCB manufacturing
Pick and place
Netlist
BOM
Mechanical design 2D design files
3D design files
Hardware MPOS-STD2 prototype unit
MPOS-STD2 evaluation kit
 
Status:
Package:
Temperature:

Description of what each option of the reference design contains.

MPOS-STD2-REF#: MPOS Standard II Reference Design that contains all the design files, software and reports. Does not include physical hardware.

MPOS-STD2-PRO#: MPOS Standard II Prototype that is a working prototype with casing of the full MPOS. Does not include design files, software and reports.

MPOS-STD2-KIT#: MPOS Standard II Evaluation Kit is an development kit based upon the MPOS-STD2 reference design. Does not include design files, software and reports.

ARM is a registered trademark of ARM Limited.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Cortex is a registered trademark of ARM Limited.

MAX32550
DeepCoverセキュアArm Cortex-M3フラッシュマイクロコントローラ

  • Arm® Cortex® M3プロセッサコアによってアプリケーションへの容易な集積を実現
  • セキュリティ機能によってシステムレベルの保護を実現
  • 内蔵ペリフェラルによって外付け部品数を削減

MAX8934A
高度バッテリ温度監視、デュアル入力リニアチャージャ、Smart Power Selector

  • Smart Power Selectorを備えたLi+チャージャ、外付けMOSFET不要
  • JEITA推奨に従うバッテリ温度の監視と充電電流と終止電圧の自動調整
  • 放電時の高温バッテリのアクティブローOTフラグシステム

MAX8625
高効率、シームレスな遷移、ステップアップ/ダウンDC-DCコンバータ

  • 4つのMOSFET内蔵の真のHブリッジバック/ブースト
  • グリッチフリー、バック/ブースト遷移
  • 遷移時の最小出力リップル変動

MAX13204E
2/4/6/8チャネル±30kV ESD保護、µDFNパッケージ

  • 高速データラインのESD保護
  • 小型µDFNパッケージ
  • 小さい入力容量:6pF

MAX1723
1.5µA IQ、ステップアップDC-DCコンバータ、TSOTおよびµDFNパッケージ

  • 最大効率:90%
  • 外付けダイオードやFETは不要
  • 自己消費電流:1.5µA