MAX14839

24V Pin-Configurable Industrial Sensor Output Drivers

Simplify and Shrink Sensor Designs by 25x


Please check latest availability status for a specific part variant.

Description

The MAX14838/MAX14839 24V/100mA drivers are optimized for use in industrial sensors. These devices integrate all of the high-voltage (24V) circuitry commonly found in industrial sensors, including a configurable PNP/ NPN/push-pull driver and an integrated linear regulator that meets common sensor power requirements.

The MAX14838/MAX14839 are pin-configurable. Logic inputs allow the driver to be configured for high-side (PNP), low-side (NPN), or push-pull operation. An additional input allows the user to select between normally-open and normally-closed logic.

The MAX14838 features an onboard 5V linear regulator, while the MAX14839 features a 3.3V linear regulator.

Each device includes two LED drivers for visual feedback. One LED driver reflects the output logic status and the other is a general-purpose driver that can be used to signal a fault condition.

The DO output, supply (VCC), and ground (GND) pins are reverse polarity-protected and are protected against IEC ESD and surge events.

The MAX14838 and MAX14839 operate from a wide supply range and are available in a 12-pin TDFN-EP package (3mm x 3mm) or a 12-bump wafer-level package (WLP) (2.1mm x 1.6mm) and operate over the -40°C to +105°C temperature range.
MAX14838, MAX14839: Typical Application Circuit MAX14838, MAX14839: Typical Application Circuit Enlarge+

Key Features

  • High Configurability Simplifies Design
    • Pin-Selectable High-Side (PNP), Low-Side (NPN), or Push-Pull Driver
    • Pin-Configurable NO/NC Logic
  • Integrated Protection Provides Robust Sensor Solutions
    • Reverse-Polarity Protection on DO, VCC, and GND
    • 4.75V to 34V Supply Range (MAX14839)
    • Driver is Short-Circuit Protected
    • Active-Low FAULT Output for Fault Indication
    • VCC Hot Plug Protection
    • Thermal Shutdown Protection
    • ±1kV/500Ω Surge Protection
    • ±8kV IEC 61000-4-2 Air Gap ESD Protection
    • ±6kV IEC 61000-4-2 Contact ESD Protection
    • -40°C to +105°C Temperature Range
  • Fast Turn-Off of Inductive Loads Up to 1.5H
  • Saves Space on Board
    • Available in 12-Pin TDFN-EP (3mm x 3mm) or 12-Bump WLP (2.1mm x 1.6mm)
    • Dual Integrated 2mA LED Drivers

Applications/Uses

  • Capacitive and Inductive Sensors
  • Industry Binary Sensors
  • Proximity Switches
Part NumberFunctionsVCC
(V)
VCC
(V)
DO
(mA)
Logic-Level Supply Voltage
(V)
Integrated PowerProtection FeaturesPackage/PinsOper. Temp.
(°C)
Budgetary
Price
minmaxtypSee Notes
MAX14838 Binary Driver4.753410055V LDO
High ESD
High Temp Warning and Shutdown
Reverse Polarity
Short Circuit
TDFN/12
WLP/12
-40 to +105$1.97 @1k
MAX14839 -3.3V LDO
TDFN/12
WLP/12
See All IO-Link Transceivers and Binary Drivers (12)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX14838EVKIT: Evaluation Kit for the MAX14838

Quality and Environmental Data

Product Reliability Reports: MAX14839.pdf 
Lead-Free Package Tin (Sn) Whisker Reports

Tools & Models

  • MAX14839 IBIS Model
  • CAD Symbols and Footprints

  • MAX14839GTC+
  • MAX14839GTC+T
  • MAX14839GWC+
  • MAX14839GWC+T
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAXM86161
    Single-Supply Integrated Optical Module for HR and SpO2 Measurement

    • Complete Single-Channel Optical Data Acquisition System
    • Built-In Algorithm Further Enhances Rejection of Fast Ambient Transients
    • Optimized Architecture for Reflective Heart Rate and SpO2 Monitoring

    MAX30208
    ±0.1°C Accurate, I2C Digital Temperature Sensor

    • High Accuracy and Precision
    • Low Power Consumption
    • Small Size