DS1780

CPU Peripheral Monitor


Please check latest availability status for a specific part variant.

Description

The DS1780 is a highly integrated system instrumentation monitor that is ideal for use in personal computers or any microprocessor-based system. It monitors temperature (±2°C accuracy from -25°C to +100°C), six power supply voltages, and the speed of two fans. Fan speed can also be controlled using the DS1780's internal 8-bit DAC. All measurements are internally converted to a digital format for easy processing by the CPU.

The DS1780 can be reset to its default power-up state through a remote reset function that has internal debounce and delay. The DS1780 also features an interrupt function that can be programmed to become active should any of the monitored parameters fall out of spec. For board-level testability, an internal NAND TREE function simplifies system design, and a chassis intrusion input enhances system security.

Programming and data readout are accessed through a simple 2-wire interface with 2-bit addressability. The DS1780 power supply range of 2.8V to 5.75V allows parameter monitoring for 3V or 5V systems. The DS1780 is assembled in a 24-pin 173mil TSSOP package (DS1780E).
DS1780: Functional Block Diagram DS1780: Functional Block Diagram Enlarge+

Key Features

  • ±2°C accuracy (from -25°C to +100°C) 9-bit digital thermometer
  • Six 8-bit ADC channels for monitoring PC power supplies
  • Two tachometer inputs
  • 8-bit DAC for fan speed control
  • Maskable system interrupt for all measured parameters (temperature, voltage, fan speed, intrusion detect)
  • Limit settings are user-programmable
  • Data is transferred over 2-wire/SMBus interface
  • Two address inputs allow up to four DS1780 to operate on a single bus
  • 2.8V to 5.75V operating range
  • 24-pin 173mil TSSOP package (DS1780E)

Applications/Uses

  • Computer Graphics Systems
  • Industrial Instruments
  • Notebook Computers
  • Portable Terminals
  • Storage Area Networks (SANs)
Part NumberSensor TypeFunctionsInterfaceChannelsAccuracy
(±°C)
Parasite Pwr.Temp. Thresh.Temp. Resolution
(bits)
Multi DroppableOper. Temp.
(°C)
Package/PinsBudgetary
Price
See Notes
DS1780 Local
Fan Monitor
Voltage Monitor
2-Wire/I2C/SMBusOne2NoProgrammable9Yes-40 to +125
TSSOP/24
$2.08 @1k
See All Temperature Sensors (112)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

CAD Symbols and Footprints

  • DS1780E
  • DS1780E+
  • DS1780E+T&R
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAXM86161
    Single-Supply Integrated Optical Module for HR and SpO2 Measurement

    • Complete Single-Channel Optical Data Acquisition System
    • Built-In Algorithm Further Enhances Rejection of Fast Ambient Transients
    • Optimized Architecture for Reflective Heart Rate and SpO2 Monitoring

    MAX30208
    ±0.1°C Accurate, I2C Digital Temperature Sensor

    • High Accuracy and Precision
    • Low Power Consumption
    • Small Size