Xilinx Zynq Ultrascale+ MPSoc ZCU102 Power Solution



Zynq® Ultrascale+™ MPSoCs integrate an ARM®-based system with on-chip programmable logic for applications ranging from 5G Wireless, to next generation ADAS, and Industrial Internet-of-Things. Power requirements are wide-ranging with higher end versions requiring up to 25 power rails. The solution presented below is certified by Xilinx and is the power solution for the Xilinx ZCU102 evaluation board. 

Click on a block to view recommended products for each rail.

UTIL_1V13 VCCPSDDRPLL VCCOPS3 MGTRAVTT MGTRAVCC VCCPSPLL VCCPSAUX UTIL_1V8 UTIL_1V8 PS_DDR4_VPP PS_DDR4_VPP DP_VCC3V3 3.3V_IO MGTRAVTT MGTRAVCC UTIL_5V0 VCCOPS VDDQ VCCPSINTLP VCC3V3 VCC1V2 VCCAUX VCCBRAM UTIL_3V3 VCCPSINTFP VADJ_FMC VCCINT Master Enable Sequencer Supervisor

Power Solution IC BOM

Master/Slave Chipset:
MAX20751 (2)
VT1679 (2)
Multiphase Master with PMBus interface in combination with multiple Smart Slave buck regulators

Switching Controllers:
MAX15301 (4)
MAX15303 (8)
InTune Automatically Compensated Digital PoL Controllers with Driver and PMBus Telemetry

Linear Regulators:
MAX15027 (3)
MAX8869 (8)
MAX8892
MAX8902


Part Number Description EV Kit
MAX20751 Multiphase Master with PMBus Interface and Internal Buck Converter MAX20751S1VKIT
VT1697B Smart Slave IC with Integrated Current and Temperature Sensors  
MAX20751 High-Efficiency, Synchronous Step-Down DC-DC Converter  
MAX15053 Current-Mode Synchronous, Step-Down Switching Regulator MAX15053EVKIT
MAX15301AA02 INTUne Automatically Compensated Digital PoL Controller with Driver and PMBus Telemetry MAX15301EVKITHP
MAX15027 Low-Dropout Regulator with BIAS Input  
MAXPOWERTOOL002 USB-to-PMBus Interface Dongle for Power Products  
MAX16050 Sequencer Circuit with Reverse-Sequencing Capability MAX16050EVKIT
MAX16052 High-Voltage, Adjustable Sequencer/Supervisor  
MAX6816 CMOS Switch Debouncers  
MAX13035 6-Channel High-Speed Logic-Level Translators  
MAX8892 Dual Linear Regulator  

Resources

Design & Simulate