MAXM15066EVKIT

Evaluation Kit for the MAXM15066 5V Output-Voltage Application


Please check latest availability status for a specific part variant.

Description

The MAXM15066 5V output evaluation kit (EV kit) provides a proven design to evaluate the MAXM15066 high-voltage, high-efficiency, synchronous step-down DC-DC module. The EV kit is programmed to deliver 5V output for loads up to 300mA. The EV kit features an adjustable input undervoltage lockout, selectable mode, and open-drain active-low RESET signal. The MAXM15066 data sheet provides a complete description of the module that should be read in conjunction with this EV kit data sheet prior to modifying the demo circuit. For full module features, benefits and parameters, refer to the MAXM15066 data sheet.

Key Features

  • Highly Integrated Solution
  • Wide 8.5V to 60V Input Range
  • Fixed 5V Output, Delivers Up To 300mA Output Current
  • High 85.01% Efficiency (VIN = 24V, VOUT = 5V at 150mA)
  • 550kHz Switching Frequency
  • ENABLE/UVLO Input, Resistor-Programmable UVLO Threshold
  • PFM Feature for Better Light-Load Efficiency
  • Fixed Internal 3.75ms Soft-Start Time
  • Active-Low RESET Output, with Pullup Resistor to VCC
  • Overcurrent and Overtemperature Protection (OCP and OTP)
  • Low-Profile, Surface-Mount Components
  • Proven PCB Layout
  • Fully Assembled and Tested
  • Complies with CISPR22(EN55022) Class B Conducted and Radiated Emissions

Applications/Uses

  • 4-20mA Current-Loop Powered Sensors
  • Battery-Powered Equipment
  • General Purpose Point-of-Load
  • HVAC and Building Control
  • Industrial Sensors and Encoders
  • LDO Replacement
  • USB Type-C Powered Loads
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX77597
36V, 300mA, Buck Converter with 1.1μA IQ

  • Flexible Power for Systems That Require a Wide Input Voltage Range
  • Minimizes Power Consumption and Extends Battery Life
  • Minimizes Solution Size

MAX38802
Integrated, Step-Down Switching Regulators with Selectable Applications Configurations

  • High-Efficiency Solution
  • Flexible Design Allows Early PCB Definition
  • Advanced Architecture, Protection and Reporting Guarantees Reliable Designs
  • Saves Board Space

MAX38803
Integrated, Step-Down Switching Regulators with Selectable Applications Configurations

  • High-Efficiency Solution
  • Flexible Design Allows Early PCB Definition
  • Advanced Architecture, Protection and Reporting Guarantees Reliable Designs
  • Saves Board Space

MAX17291
High-Voltage, 1A Micropower Boost Converter with Short-Circuit Protection and True Shutdown

  • 28μA Quiescent Supply Current from Input
  • Output Short-Circuit Protection
  • Overtemperature Protection

MAX77831
2.5V to 16V Input, 18W Output High-Efficiency Buck-Boost Converter

  • Wide Input Voltage Range: 2.5V to 16V
  • Default Output Voltage
  • Default 1.8MHz Switching Frequency

MAX15157B
60V Current-Mode Buck Controller with Accurate Current Report

  • Wide Operating Range Reduces Development Time
  • Integration Reduces Design Footprint
  • Robust Fault Protection Improves Quality and Simplifies System Design

MAX38886
2.5V to 5.0V, 0.5A/2.5A, Charge/Discharge Regulator for Supercapacitor Backup Applications

  • 2.5V to 5V System Output Voltage
  • Up to 4.5V Capacitor Voltage Range
  • Up to 2.5A Peak Inductor Discharge Current

MAX17783C
4.5V to 60V, 2.5A, High Efficiency, Step-Down DC-DC Converter

  • Reduces External Components and Total Cost
  • Reduces Number of DC-DC Regulators to Stock
  • Reduces Power Dissipation

MAX20028
Step-Down Controller with Dual 2.1MHz Step-Down DC-DC Converters

  • High-Efficiency Voltage DC-DC Controller Saves Power
  • Dual 2.1MHz DC-DC Converters with Integrated FETs Saves Space
  • High Accuracy to Meet ASIL Specification

MAX77533
14V Input, 1.5A High-Efficiency Buck Converter with 9μA IQ

  • 1.5A Single Channel Buck Regulator
  • 3V to 14V Input Voltage Range
  • 0.8V to 99%VSUP Output Voltage Range

MAX20766
Smart Slave IC with Integrated Current and Temperature Sensors

  • Increased Power Density with Fewer External Components
  • Accurate Real-Time Telemetry of Critical Parameters
  • Advanced Self-Protection Features for the System and IC

MAX20796
Dual-Phase Scalable Integrated Voltage Regulator with PMBus Interface

  • Peak Efficiency 92%; Full-Load Efficiency 90% at VIN = 12V, VOUT = 1V
  • Operating Input Voltage Range 4.5V to 16V
  • Output Voltage Range is 0.5V to 5.5V

MAX17227A
400mV to 5.5V Input, 2A nanoPower Boost Converter with Short-Circuit Protection and True Shutdown

  • 350nA Quiescent Supply Current from Output
  • Output Short-Circuit Protection
  • True Shutdown Mode

MAX20030
Dual Buck, Sync Boost and LDO–Complete Front-End Power Supply with 17μA IQ

  • Meets Stringent OEM Module Power Consumption and Performance Specifications
  • Enables Crank-Ready Designs
  • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input Voltage Range

MAX20031
Dual Buck, Sync Boost and LDO–Complete Front-End Power Supply with 17μA IQ

  • Meets Stringent OEM Module Power Consumption and Performance Specifications
  • Enables Crank-Ready Designs
  • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input Voltage Range

MAX25431
Automotive 40V, 2.2MHz, H-Bridge Buck-Boost Controller

  • Meets Stringent Automotive Quality and Reliability Requirements
  • Efficient Solution in a Small Solutions Size
  • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements

MAX20710
Integrated, Step-Down Switching Regulator with PMBus

  • High Power Density and Low Component Count
  • Optimized Component Performance and Efficiency with Reduced Design-In Time
  • Increased Power-Supply Reliability with System and IC Self-Protection Features

MAX17760
4.5V to 76V, 300mA, High-Efficiency, Synchronous Step-Down DC-DC Converter

  • Reduces External Components and Total Cost
  • Reduces Number of DC-DC Regulators to Stock
  • Reduces Power Dissipation

MAX20430
Four-Output Mini PMIC for Safety Applications

  • Multiple Functions for Small Size
  • High-Precision for ASIL Applications
  • Diagnostics and Redundant Circuits

MAX18066
High-Efficiency, 4A, Step-Down DC-DC Regulator with Internal Power Switches

  • Feature Integration Shrinks Solution Size
  • High Efficiency Conserves Power
  • Safe, Reliable, Accurate Operation

MAX18166
High-Efficiency, 4A, Step-Down DC-DC Regulator with Internal Power Switches

  • Feature Integration Shrinks Solution Size
  • High Efficiency Conserves Power
  • Safe, Reliable, Accurate Operation