MAX8625A

High-Efficiency, Seamless Transition, Step-Up/Down DC-DC Converter

Glitch-Free, Smooth Step-Up/Down Transition H-Bridge Converter


Please check latest availability status for a specific part variant.

Description

The MAX8625A PWM step-up/down regulator is intended to power digital logic, hard disk drives, motors, and other loads in portable, battery-powered devices such as PDAs, cell phones, digital still cameras (DSCs), and MP3 players. The MAX8625A provides either a fixed 3.3V or adjustable output voltage (1.25V to 4V) at up to 0.8A from a 2.5V to 5.5V input. The MAX8625A utilizes a 2A peak current limit.

Maxim's H-bridge topology provides a seamless transition through all operating modes without the glitches commonly seen with other devices. Four internal MOSFETs (two switches and two synchronous rectifiers) with internal compensation minimize external components. An active-low SKIP input selects a low-noise, fixed-frequency PWM mode, or a high-efficiency skip mode where the converter automatically switches to PFM mode under light loads for best light-load efficiency. The internal oscillator operates at 1MHz to allow for a small external inductor and capacitors.

The MAX8625A features current-limit circuitry that shuts down the IC in the event of an output overload. In addition, soft-start circuitry reduces inrush current during startup. The IC also features True Shutdown™, which disconnects the output from the input when the IC is disabled. The MAX8625A is available in a 3mm x 3mm, 14-pin TDFN package.
MAX8625: Typical Operating Circuit MAX8625: Typical Operating Circuit Enlarge+

Key Features

  • Four Internal MOSFET True H-Bridge Buck/Boost
  • Glitch-Free, Buck-Boost Transitions
  • Minimal Output Ripple Variation on Transitions
  • Up to 92% Efficiency
  • 37µA (typ) Quiescent Current in Skip Mode
  • 2.5V to 5.5V Input Range
  • Fixed 3.3V or Adjustable Output
  • 1µA (max) Logic-Controlled Shutdown
  • True Shutdown
  • Output Overload Protection
  • Internal Compensation
  • Internal Soft-Start
  • 1MHz Switching Frequency
  • Thermal-Overload Protection
  • Small 3mm x 3mm, 14-Pin TDFN Package

Applications/Uses

  • Battery-Powered Hard Disk Drive (HDD)
  • DSCs and Camcorders
  • MP3 Players and Cellular Phones
  • PDAs and Smartphones
Part NumberVIN
(V)
VIN
(V)
VOUT1
(V)
VOUT1
(V)
Preset VOUT
(V)
IOUT1
(A)
IOUT1
(A)
Output Adjust. MethodSwitch TypeSynchronous SwitchingICC
(mA)
DC-DC OutputsOper. Freq.
(kHz)
Package/PinsOper. Temp.
(°C)
Budgetary
Price
minmaxminmaxmaxSee Notes
MAX8625 2.55.51.2543.30.80.8
Preset
Resistor
InternalYes0.04511000
TDFN/14
-40 to +85$2.63 @1k
See All Step-Down/Up Switching Regulators (28)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX8625AEVKIT: Evaluation Kit for the MAX8625A

Technical Documents

Tutorial 5133 Power-Supply Solutions for Altera FPGAs
Tutorial 5132 Power-Supply Solutions for Xilinx FPGAs
Tutorial 671 Energy Management for Small Portable Systems

Quality and Environmental Data

Request Reliability Report for: MAX8625A 
Lead-Free Package Tin (Sn) Whisker Reports

CAD Symbols and Footprints

  • MAX8625AETD+
  • MAX8625AETD+T
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX20026, MAX20026S
    Automotive Quad, Low-Voltage Step-Down DC-DC Converters with Low-Noise LDO

    • High-Integration Shrinks Solution Size
    • Performance Designed for Automotive Point-of-Load Regulation
    • Low-Noise Features Improve EMI Performance

    MAX20026S
    Automotive Quad, Low-Voltage Step-Down DC-DC Converters with Low-Noise LDO

    • High-Integration Shrinks Solution Size
    • Performance Designed for Automotive Point-of-Load Regulation
    • Low-Noise Features Improve EMI Performance

    MAX20801
    MPP Tracking DC-DC Converter

    • Performs MPPT on 20-24 Series Connected PV Cells
    • Fast MPPT Reacts Quickly to Changing Conditions
    • Integrated Voltage-Limiting Clamps Output Voltage

    MAX20800
    MPP Tracking DC-DC Converter

    • Performs MPPT on 20-24 Series Connected PV Cells
    • Fast MPPT Reacts Quickly to Changing Conditions
    • Integrated Voltage-Limiting Clamps Output Voltage

    MAX20059
    4.5V to 76V, 1A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Synchronous DC-DC Converters with Integrated FETs
    • Flexibility
    • Active-Low RESET Output and EN Input (26V max) Simplify Power Sequencing

    MAX20058
    60V, 1A, Automotive Synchronous Step-Down DC-DC Converter

    • Synchronous DC-DC Converters with Integrated FETs
    • Flexibility
    • Active-Low RESET Output and EN Input (26V max) Simplify Power Sequencing

    MAXM17904
    4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17905
    4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17906
    4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM15065
    4.5V to 60V, 300mA Step-Down uSLIC Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM15066
    4.5V to 60V, 300mA Step-Down uSLIC Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM15067
    4.5V to 60V, 300mA Step-Down uSLIC Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAX20048
    Automotive 40V, 55µA IQ, 2.2MHz, H-Bridge Buck-Boost Controller

    • Meets Stringent Automotive Quality and Reliability Requirements
    • Efficient Solution in a Small Solutions Size
    • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements

    MAX20010C
    Automotive Single 6A Step-Down Converters

    • Fully Integrated, Synchronous 6A DC-DC Converter Enables Small Solution Size
    • High-Precision Voltage Regulator for Applications Processors
    • Low-Noise Feature Reduces EMI

    MAX20010D
    Automotive Single 6A Step-Down Converters

    • Fully Integrated, Synchronous 6A DC-DC Converter Enables Small Solution Size
    • High-Precision Voltage Regulator for Applications Processors
    • Low-Noise Feature Reduces EMI

    MAX20039
    Automotive, 2V to 36V, 2.2MHz, 0.6A/1.2A Buck-Boost Converters with Integrated H-Bridge Architecture

    • Meets Stringent Automotive Quality and Reliability Requirements
    • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements (B and D version only)
    • High Switching Frequency Allows Use of Small External Components

    MAX20040
    Automotive, 2V to 36V, 2.2MHz, 0.6A/1.2A Buck-Boost Converters with Integrated H-Bridge Architecture

    • Meets Stringent Automotive Quality and Reliability Requirements
    • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements (B and D version only)
    • High Switching Frequency Allows Use of Small External Components

    MAX20029B
    Automotive Quad/Triple/Quad Low-Voltage Step-Down DC-DC Converters

    • Quad Step-Down DC-DC Converters with Integrated FETs
    • Operate from 3.0V to 5.5V Supply Voltage
    • 1.0V to 4.0V Fixed or Adjustable Output Voltage

    MAX20029C
    Automotive Quad/Triple/Quad Low-Voltage Step-Down DC-DC Converters

    • Quad Step-Down DC-DC Converters with Integrated FETs
    • Operate from 3.0V to 5.5V Supply Voltage
    • 1.0V to 4.0V Fixed or Adjustable Output Voltage

    MAX20029, MAX20029B, MAX20029C
    Automotive Quad/Triple/Quad Low-Voltage Step-Down DC-DC Converters

    • Quad Step-Down DC-DC Converters with Integrated FETs
    • Operate from 3.0V to 5.5V Supply Voltage
    • 1.0V to 4.0V Fixed or Adjustable Output Voltage

    MAX77827
    5.5V Input, 1.8A/3.1A Switch Buck-Boost Converter with 6μA IQ

    • 1.8V to 5.5V Input Voltage Range
    • 2.3V to 5.3V Single Resistor Adjustable Output Voltage
    • 1.6A Maximum Output Current (3.1A ILIM Option, Buck Mode)

    MAXM15465
    4.5V to 42V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM15466
    4.5V to 42V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM15467
    4.5V to 42V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17623
    2.9V to 5.5V, 1A Himalaya uSLIC Step-Down Power Modules

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17624
    2.9V to 5.5V, 1A Himalaya uSLIC Step-Down Power Modules

    • Easy to Use
    • High Efficiency
    • Flexible Design