Product Details
Key Features
Applications/Uses
VIN (V) (min) | 2.7 |
VIN (V) (max) | 5.5 |
# Step-Up Outputs | 1 |
# Inverting Outputs | 1 |
VOUT (V) (min) | -13 |
VOUT (V) (max) | 24 |
Package/Pins | TDFN/14 |
VIN (V) (min) | 2.7 |
VIN (V) (max) | 5.5 |
VOUT1 (V) (min) | 3 |
VOUT1 (V) (max) | 24 |
IOUT1 (A) (max) | 0.125 |
Switch Type | Internal |
Output Adjust. Method | Resistor |
# DC-DC Outputs | 2 |
Alternate Topology | Step-Up |
Switching Frequency (kHz) | 1000 |
Power Good Signal | Yes |
Package/Pins | TDFN/14 |
Budgetary Price (See Notes) | 1.68 |
VIN (V) (min) | 2.7 |
VIN (V) (max) | 5.5 |
VOUT1 (V) (min) | 3 |
VOUT1 (V) (max) | 24 |
IOUT1 (A) (max) | 0.125 |
Switch Type | Internal |
Output Adjust. Method | Resistor |
Power Good Signal | Yes |
IQ (mA) (typ) | 0.4 |
Shutdown Mode Supply Current (µA) (typ) | 0.1 |
Shutdown Mode Supply Current (µA) (max) | 5 |
# DC-DC Outputs | 2 |
Switching Frequency (kHz) | 1000 |
Package/Pins | TDFN/14 |
Simplified Block Diagram
Technical Docs
Data Sheet | Dual-Output (+ and -) DC-DC Converters for CCD | Aug 01, 2014 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.
Parameters
VIN (V) (min) | 2.7 |
VIN (V) (max) | 5.5 |
# Step-Up Outputs | 1 |
# Inverting Outputs | 1 |
VOUT (V) (min) | -13 |
VOUT (V) (max) | 24 |
Package/Pins | TDFN/14 |
VIN (V) (min) | 2.7 |
VIN (V) (max) | 5.5 |
VOUT1 (V) (min) | 3 |
VOUT1 (V) (max) | 24 |
IOUT1 (A) (max) | 0.125 |
Switch Type | Internal |
Output Adjust. Method | Resistor |
# DC-DC Outputs | 2 |
Alternate Topology | Step-Up |
Switching Frequency (kHz) | 1000 |
Power Good Signal | Yes |
Package/Pins | TDFN/14 |
Budgetary Price (See Notes) | 1.68 |
VIN (V) (min) | 2.7 |
VIN (V) (max) | 5.5 |
VOUT1 (V) (min) | 3 |
VOUT1 (V) (max) | 24 |
IOUT1 (A) (max) | 0.125 |
Switch Type | Internal |
Output Adjust. Method | Resistor |
Power Good Signal | Yes |
IQ (mA) (typ) | 0.4 |
Shutdown Mode Supply Current (µA) (typ) | 0.1 |
Shutdown Mode Supply Current (µA) (max) | 5 |
# DC-DC Outputs | 2 |
Switching Frequency (kHz) | 1000 |
Package/Pins | TDFN/14 |
Key Features
- Dual Output Voltages (+ and -)
- Adjustable Up to +24V and Down to -10V at 5.5VIN
- Output Short/Overload Protection
- True Shutdown on Both Outputs
- Controlled Inrush Current During Soft-Start
- Selectable Power-On Sequencing
- Up to 90% Efficiency
- 1µA Shutdown Current
- 1MHz Fixed-Frequency PWM Operation
- Fault-Condition Flag
- Thermal Shutdown
- Small, 3mm x 3mm, 14-Pin TDFN Package
Applications/Uses
- Camcorders and Portable Multimedia
- CCD Bias Supplies and OLED Displays
- Digital Cameras
- PDAs and Smartphones
Description
The MAX8614A/MAX8614B generate an adjustable positive output voltage up to +24V and a negative output down to 16V below the input voltage. The MAX8614B has a higher current limit than the MAX8614A. Both devices operate at a fixed 1MHz frequency to ease noise filtering in sensitive applications and to reduce external component size.
Additional features include pin-selectable power-on sequencing for use with a wide variety of CCDs, True Shutdown, overload protection, fault flag, and internal soft-start with controlled inrush current.
The MAX8614A/MAX8614B are available in a spacesaving 3mm x 3mm 14-pin TDFN package and are specified over the -40°C to +85°C extended temperature range.
Technical Docs
Data Sheet | Dual-Output (+ and -) DC-DC Converters for CCD | Aug 01, 2014 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.