Maxim
/
Products
/
Power
/
Switching Regulator - Switching Regulators
/
MAX757
Power Switching Regulator - Switching Regulators MAX757
Top

MAX757

Download

3.3V/5V/Adjustable-Output, Step-Up DC-DC Converters

For New Designs, We Recommend Improved Performance Devices, MAX1674/MAX1675/MAX1676

Printable Data Sheet Subscribe

Product Details

See parametric specs for Step-Up Switching Regulators

Key Features

See parametric specs for Step-Up Switching Regulators
Parametric specs for Step-Up Switching Regulators
VIN (V) (min) 0.7
VIN (V) (max) 5.5
VOUT1 (V) (min) 2.7
VOUT1 (V) (max) 5.5
IOUT1 (A) (max) 0.3
Switch Type Internal
Output Adjust. Method Resistor
Power Good Signal Yes
Shutdown Mode Supply Current (µA) (typ) 0.02
# DC-DC Outputs 1
Switching Frequency (kHz) 500
Package/Pins PDIP/8
SOIC (N)/8
Budgetary
Price (See Notes) 		2.29
See parametric specs for Step-Up Switching Regulators
View Less

Simplified Block Diagram

Technical Docs

Data Sheet 3.3V/5V/Adjustable-Output, Step-Up DC-DC Converters Jan 01, 1995

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.

Parameters

Parametric specs for Step-Up Switching Regulators
VIN (V) (min) 0.7
VIN (V) (max) 5.5
VOUT1 (V) (min) 2.7
VOUT1 (V) (max) 5.5
IOUT1 (A) (max) 0.3
Switch Type Internal
Output Adjust. Method Resistor
Power Good Signal Yes
Shutdown Mode Supply Current (µA) (typ) 0.02
# DC-DC Outputs 1
Switching Frequency (kHz) 500
Package/Pins PDIP/8
SOIC (N)/8
Budgetary
Price (See Notes) 		2.29
See parametric specs for Step-Up Switching Regulators

Key Features

  • Operates Down to 0.7V Input Supply Voltage
  • 87% Efficiency at 200mA
  • 60µA Quiescent Current
  • 20µA Shutdown Mode with Active Reference and LBI Detector
  • 500kHz Maximum Switching Frequency
  • ±1.5% Reference Tolerance Over Temperature
  • Low-Battery Detector (LBI/LBO)
  • 8-Pin DIP and SO Packages

Applications/Uses

  • 2-Cell and 3-Cell Battery-Operated Equipment
  • 3.3V to 5V Step-Up Conversion
  • Glucose Meters
  • Medical Instrumentation
  • Palmtop Computers
  • Personal Data Communicators/Computers
  • Portable Data-Collection Equipment

Description

The MAX756/MAX757 are CMOS step-up DC-DC switching regulators for small, low input voltage or battery-powered systems. The MAX756 accepts a positive input voltage down to 0.7V and converts it to a higher pin-selectable output voltage of 3.3V or 5V. The MAX757 is an adjustable version that accepts an input voltage down to 0.7V and generates a higher adjustable output voltage in the range from 2.7V to 5.5V. Typical full-load efficiencies for the MAX756/MAX757 are greater than 87%.

The MAX756/MAX757 provide three improvements over previous devices. Physical size is reduced-the high switching frequencies (up to 0.5MHz) made possible by MOSFET power transistors allow for tiny (< 5mm diameter) surface-mount magnetics. Efficiency is improved to 87% (10% better than with low-voltage regulators fabricated in bipolar technology). Supply current is reduced to 60µA by CMOS construction and a unique constant-off-time pulse-frequency modulation control scheme.

Simplified Block Diagram

MAX756, MAX757: Typical Operating Circuit MAX756, MAX757: Typical Operating Circuit Zoom icon

Technical Docs

Data Sheet 3.3V/5V/Adjustable-Output, Step-Up DC-DC Converters Jan 01, 1995

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.