›

MAX5088

2.2MHz, 2A Buck Converters with an Integrated High-Side Switch

Up to 2.2MHz Switching Frequency Prevents Harmonics from Interfering in the ADSL2+ and Automotive AM Radio Frequency Bands

Data Sheet

Please check latest availability status for a specific part variant.

Overview

Description

The MAX5088/MAX5089 high-frequency, DC-DC converters with an integrated n-channel power MOSFET provide up to 2A of load current. The MAX5088 includes an internal power MOSFET to enable the design of a nonsynchronous buck topology power supply. The MAX5089 is for the design of a synchronous buck topology power supply. These devices operate from a 4.5V to 5.5V or 5.5V to 23V input voltage and a 200kHz to 2.2MHz resistor-programmable switching frequency. The voltage-mode architecture with a peak switch current-limit scheme provides stable operation up to a 2.2MHz switching frequency. The MAX5088 includes a clock output for driving a second DC-DC converter 180° out-of-phase and a power-on-reset (RESET-bar) output. The MAX5089 includes a power-good output and a synchronous rectifier driver to drive an external low-side MOSFET in the buck converter configuration for high efficiency.

The MAX5088/MAX5089 protect against overcurrent conditions by utilizing a peak current limit as well as overtemperature shutdown providing a very reliable and compact power source for point-of-load regulation applications. Additional features include synchronization, internal digital soft-start, and an enable input. The MAX5088/MAX5089 are available in a thermally enhanced, space-saving 16-pin TQFN (5mm x 5mm) package and operate over the -40°C to +125°C temperature range.

MAX5088, MAX5089: Typical Application Circuit

Enlarge+

Key Features

4.5V to 5.5V or 5.5V to 23V Input Voltage Range
Output Voltage Adjustable Down to 0.6V
2A Output Current
Synchronous Rectifier Driver Output (MAX5089) for Higher Efficiency
Resistor-Programmable Switching Frequency from 200kHz to 2.2MHz
External Synchronization and Enable (On/Off) Inputs
Clock Output for Driving Second Converter 180° Out-Of-Phase (MAX5089)
Integrated 150mΩ High-Side n-Channel Power MOSFET
Power-On Reset Output (MAX5088)/Power-Good Output (MAX5089)
Short-Circuit Protection
Thermal-Shutdown Protection
Thermally Enhanced 16-Pin TQFN Package Dissipates 2.7W

Applications/Uses

Automotive Radio Power Supply
IP Phones/WLAN Access Points
Servers and Networks
xDSL Modem Power Supply

Design Resources

Quality and Environmental Data

Product Reliability Reports: MAX5088.pdf
Lead-Free Package Tin (Sn) Whisker Reports

CAD Symbols and Footprints

MAX5088ATE+

Quality And Environmental

Device	Fab Process	Technology	Sample size	Rejects	FIT at 25°C	FIT at 55°C

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

Order

Status:

Package:

Temperature:

Related Resources

New Products

MAXM17536
4.5V to 60V, 4A High-Efficiency, DC-DC Step-Down SiP Power Module with Integrated Inductor

Reduces Design Complexity, Manufacturing Risks, and Time-to-Market
Saves Board Space in Space-Constrained Applications
Offers Flexibility for Power-Design Optimization

MAX17576
4.5V to 60V, 4A, High-Efficiency, Synchronous Step-Down DC-DC Converter with Internal Compensation

Reduces External Components and Total Cost
Reduces Number of DC-DC Regulators to Stock
Reduces Power Dissipation

MAX20412
Automotive Low-Voltage 2-Channel Step-Down Controller

2-Channel, High-Efficiency DC-DC Controller in a Small Solution Size
High-Precision Regulator for Applications Processors
Low-Noise Features Reduce EMI

MAX20343
Ultra-Low Quiescent Current, Low Noise 3.5W Buck-Boost Regulator

Extend System Run Time
Low, Continuous Noise Profile
Adaptable Load Transient Response

MAX20004E
36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

Multiple Functions for Small Size
High Precision
Robust for the Automotive Environment

MAX20006E
36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

Multiple Functions for Small Size
High Precision
Robust for the Automotive Environment

MAX20008E
36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

Multiple Functions for Small Size
High Precision
Robust for the Automotive Environment

MAX17630
4.5V to 36V, 1A, High-Efficiency, Synchronous Step-Down DC-DC Converter

Reduces External Components and Total Cost
Reduces Number of DC-DC Regulators to Stock
Reduces Power Dissipation

MAX20011
Automotive Single 8A/12A Step-Down Converter with High Efficiency

High-Efficiency DC-DC Converter
Up to 12A peak output current:
Differential Remote Voltage Sensing

MAX15158Z
High-Voltage Multiphase Boost Controller

Wide Operating Range
Integration Reduces Design Footprint
Robust Fault Protection Improves Quality and Reliability

MAX20079
Automotive 36V 3.5A Buck Converter with 3.5μA I_Q

Synchronous DC-DC Converter with Integrated FETs
Small Solution Size Saves Space
PGOOD Output and High-Voltage EN Input Simplify Power Sequencing

MAX20026, MAX20026S
Automotive Quad, Low-Voltage Step-Down DC-DC Converters with Low-Noise LDO

High-Integration Shrinks Solution Size
Performance Designed for Automotive Point-of-Load Regulation
Low-Noise Features Improve EMI Performance

MAX20026S
Automotive Quad, Low-Voltage Step-Down DC-DC Converters with Low-Noise LDO

High-Integration Shrinks Solution Size
Performance Designed for Automotive Point-of-Load Regulation
Low-Noise Features Improve EMI Performance

MAX20801
MPP Tracking DC-DC Converter

Performs MPPT on 20-24 Series Connected PV Cells
Fast MPPT Reacts Quickly to Changing Conditions
Integrated Voltage-Limiting Clamps Output Voltage

MAX20800
MPP Tracking DC-DC Converter

Performs MPPT on 20-24 Series Connected PV Cells
Fast MPPT Reacts Quickly to Changing Conditions
Integrated Voltage-Limiting Clamps Output Voltage

MAX20059
72V, 1A, Automotive Synchronous Step-Down DC-DC Converter

Synchronous DC-DC Converters with Integrated FETs
Flexibility
Active-Low RESET Output and EN Input (26V max) Simplify Power Sequencing

MAX20058
60V, 1A, Automotive Synchronous Step-Down DC-DC Converter

Synchronous DC-DC Converters with Integrated FETs
Flexibility
Active-Low RESET Output and EN Input (26V max) Simplify Power Sequencing

MAXM15066
4.5V to 60V, 300mA Step-Down uSLIC Power Module

Easy to Use
High Efficiency
Flexible Design

MAXM15067
4.5V to 60V, 300mA Step-Down uSLIC Power Module

Easy to Use
High Efficiency
Flexible Design

MAXM15065
4.5V to 60V, 300mA Step-Down uSLIC Power Module

Easy to Use
High Efficiency
Flexible Design

MAXM17904
4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

Easy to Use
High Efficiency
Flexible Design

MAXM17905
4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

Easy to Use
High Efficiency
Flexible Design

MAXM17906
4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

Easy to Use
High Efficiency
Flexible Design

MAX20010C
Automotive Single 6A Step-Down Converters

Fully Integrated, Synchronous 6A DC-DC Converter Enables Small Solution Size
High-Precision Voltage Regulator for Applications Processors
Low-Noise Feature Reduces EMI

MAX20010D
Automotive Single 6A Step-Down Converters

Fully Integrated, Synchronous 6A DC-DC Converter Enables Small Solution Size
High-Precision Voltage Regulator for Applications Processors
Low-Noise Feature Reduces EMI

MAX20048
Automotive 40V, 55µA I_Q, 2.2MHz, H-Bridge Buck-Boost Controller

Meets Stringent Automotive Quality and Reliability Requirements
Efficient Solution in a Small Solutions Size
Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements

MAX20039
Automotive, 2V to 36V, 2.2MHz, 0.6A/1.2A Buck-Boost Converters with Integrated H-Bridge Architecture

Meets Stringent Automotive Quality and Reliability Requirements
Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements (B and D version only)
High Switching Frequency Allows Use of Small External Components

MAX20040
Automotive, 2V to 36V, 2.2MHz, 0.6A/1.2A Buck-Boost Converters with Integrated H-Bridge Architecture

Meets Stringent Automotive Quality and Reliability Requirements
Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements (B and D version only)
High Switching Frequency Allows Use of Small External Components

MAX20029B
Automotive Quad/Triple/Quad Low-Voltage Step-Down DC-DC Converters