Top

VRM 9.0, Dual-Phase, Parallelable, Average Current-Mode Controller

Product Details

Key Features

Simplified Block Diagram

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.

Key Features

  • +4.75V to +5.5V or +8V to +28V Input Voltage Range
  • Up to 60A Output Current
  • Internal Voltage Regulator for a +12V or +24V Power Bus
  • Internal 5-Bit DAC VID Control (VRM 9.0 Compliant, 0.8% Accuracy)
  • Programmable Adaptive Output Voltage Positioning
  • True Differential Remote Output Sensing
  • Out-Of-Phase Controllers Reduce Input Capacitance Requirement and Distribute Power Dissipation
  • Average Current-Mode Control
    • Superior Current Sharing Between Individual Phases and Paralleled Modules
    • Accurate Current Limit Eliminates MOSFET and Inductor Derating
  • Integrated High-Output-Current Gate Drivers
  • Selectable Fixed Frequency 250kHz or 500kHz Per Phase (Up to 1MHz for 2 Phases)
  • External Frequency Synchronization from 125kHz to 600kHz
  • Internal PLL with Clock Output for Paralleling Multiple DC-DC Converters
  • Power-Good Output
  • Phase Failure Detector
  • Overvoltage and Thermal Protection
  • 44-Pin MQFP or QFN Packages

Applications/Uses

  • High-End Desktop Computers
  • Large-Memory Arrays
  • Networking Systems
  • Point-of-Load High-Current/High-Density Telecom DC-DC Regulators
  • RAID Systems
  • Servers and Workstations

Description

The MAX5037 dual-phase, PWM controller provides high-output-current capability in a compact package with a minimum number of external components. The MAX5037 utilizes a dual-phase, average current-mode control that enables optimal use of low RDS(ON) MOSFETs, eliminating the need for external heatsinks even when delivering high output currents.

Differential sensing enables accurate control of the output voltage, while adaptive voltage positioning provides optimum transient response. An internal regulator enables operation with either +5V or +12V input voltage without the need for additional voltage sources. The high switching frequency, up to 500kHz per phase, and dual-phase operation allow the use of low output inductor values and input capacitor values. This accommodates the use of PC board-embedded planar magnetics achieving superior reliability, current sharing, thermal management, compact size, and low system cost.

The MAX5037 also features a clock input (CLKIN) for synchronization to an external clock, and a clock output (CLKOUT) with programmable phase delay (relative to CLKIN) for paralleling multiple phases. The MAX5037 operates over the extended industrial temperature range (-40°C to +85°C) and is available in 44-pin MQFP or thin QFN packages. Refer to the MAX5038/MAX5041 data sheet for either a fixed output voltage controller or an adjustable output voltage controller in a 28-pin SSOP package.

Simplified Block Diagram

MAX5037: Pin Configuration MAX5037: Pin Configuration Zoom icon

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.