MAX20020

3.2MHz, 500mA Dual Step-Down Converters for Automotive Cameras

Ultra-Small 3.2MHz Dual 500mA Versatile PMIC for Camera Modules


Please check latest availability status for a specific part variant.

Description

MAX20019/MAX20020 are 2.2MHz and 3.2MHz dual step-down converters with integrated high-side and low-side MOSFETs. The high-voltage step-down converter is designed for continuous operation up to 17V input voltages. The output voltage is factory preset. Buck 1 is preset to 3.3V, 3.0V, or 2.8V. Buck 2 is preset to 1.8V, 1.5V, 1.2V, or 1V. Another option is Buck 1 preset to 5V and Buck 2 preset to 3.3V.

The low-voltage buck features fixed-frequency PWM- mode operation with a switching frequency of 2.2MHz or 3.2MHz. High-frequency operation allows for an all-ceramic capacitor design and small-size external components. The low-resistance on-chip switches ensure high efficiency while minimizing critical inductance. A 500mV enable hysteresis on the MAX20019 allows the use of long, low-cost coax cables, even during slow startup situations. The MAX20020’s Buck 1 starts after VSUP is greater than 5.5V and Buck 1 is driven by the EN input.

Protection features include overvoltage (OV) protection, cycle-by-cycle current limit, and thermal shutdown with automatic recovery. The buck converters operate 180° out-of-phase from each other to minimize input-current ripple.

Design Solution: Provide a Safe Power Path from the Car Battery to Remote Cameras ›

Design Solution: How to Miniaturize Your Automotive Remote Camera ›


MAX20019, MAX20020: Functional Diagrams MAX20019, MAX20020: Functional Diagrams Enlarge+

Key Features

  • Small Solution Size
    • 2mm x 3mm x 0.75mm 10-pin TDFN with an Exposed Pad
    • 2.2MHz and 3.2MHz Operation Allows Smaller System Size
    • No External Components Needed for Soft-Start
  • Cable Flexibility
    • 500mV Enable Hysteresis Allows for Long, Low-Cost Cables During Slow Starts
  • EMI Solutions
    • Optional Spread-Spectrum Frequency Modulation
    • Pinout Placement Allows for Tight PCB Layout of Switching Nodes
  • Self-Protected
    • Overvoltage Protection, Thermal Shutdown, Short-Circuit Protection
  • Automotive Ready
    • Wide 3.5V to 17V Input Voltage Range for Power-Over-Coax
    • Automotive Temperature Range -40°C to +125°C
    • AEC-Q100 Qualified

Applications/Uses

  • Automotive Point-of-Load
  • Surround-View Camera Power Supplies
Part NumberVIN
(V)
VIN
(V)
VOUT1
(V)
VOUT1
(V)
Preset VOUT
(V)
Output Adjust. MethodIOUT1
(A)
Switch TypeSynchronous SwitchingDC-DC OutputsOper. Freq.
(kHz)
Design ToolsPackage/PinsBudgetary
Price
minmaxminmaxSee Notes
MAX20019 3.51715
1
1.2
1.5
1.8
2.8
3.3
5
Preset0.5InternalYes2
2200
3200
EE-Sim
TDFN/10
$1.63 @1k
MAX20020 
TDFN/10
See All Step-Down Switching Regulators (380)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX20019EVKIT: Evaluation Kit for the MAX20019/MAX20020
MAX20020EVKIT: Evaluation Kit for the MAX20019/MAX20020

Tools & Models

  • EE-Sim: Design & Simulate MAX20020
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX20057
    36V Boost Controller with Dual 3.5A/2A Synchronous Buck Converters for Automotive Applications

    • Meets Stringent OEM Module Power Consumption and Performance Specifications
    • Enables Crank-Ready Designs
    • Integration and Thermally Enhanced Packages Save Board Space and Cost

    MAX17631
    4.5V to 36V, 1.5A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX17634A
    4.5V to 36V, 4.25A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX17634B
    4.5V to 36V, 4.25A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX17634C
    4.5V to 36V, 4.25A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX77501
    110VPK-PK High-Efficiency Piezo Haptic Actuator Boost Driver

    • 110VPK-PK Haptic Waveforms Generation
    • Optimized for up to 2µF Haptic Piezo Actuator
    • 2.8V to 5.5V Input Supply Range

    MAX20457
    36V Dual 3.5A/2A Synchronous Buck Converters for Automotive Applications

    • Meets Stringent OEM Module Power Consumption and Performance Specifications
    • Enables Crank-Ready Designs
    • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input-Voltage Range

    MAXM17536
    4.5V to 60V, 4A High-Efficiency, DC-DC Step-Down SiP Power Module with Integrated Inductor

    • Reduces Design Complexity, Manufacturing Risks, and Time-to-Market
    • Saves Board Space in Space-Constrained Applications
    • Offers Flexibility for Power-Design Optimization

    MAX17576
    4.5V to 60V, 4A, High-Efficiency, Synchronous Step-Down DC-DC Converter with Internal Compensation

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX20412
    Automotive Low-Voltage 2-Channel Step-Down Controller

    • 2-Channel, High-Efficiency DC-DC Controller in a Small Solution Size
    • High-Precision Regulator for Applications Processors
    • Low-Noise Features Reduce EMI

    MAX20343
    Ultra-Low Quiescent Current, Low Noise 3.5W Buck-Boost Regulator

    • Extend System Run Time
    • Low, Continuous Noise Profile
    • Adaptable Load Transient Response

    MAX20004E
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20006E
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20008E
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX17630
    4.5V to 36V, 1A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX20011
    Automotive Single 8A/12A Step-Down Converter with High Efficiency

    • High-Efficiency DC-DC Converter
    • Up to 12A peak output current:
    • Differential Remote Voltage Sensing

    MAX15158Z
    High-Voltage Multiphase Boost Controller

    • Wide Operating Range
    • Integration Reduces Design Footprint
    • Robust Fault Protection Improves Quality and Reliability

    MAX20079
    Automotive 36V 3.5A Buck Converter with 3.5μA IQ

    • Synchronous DC-DC Converter with Integrated FETs
    • Small Solution Size Saves Space
    • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing

    MAX20026, MAX20026S
    Automotive Quad, Low-Voltage Step-Down DC-DC Converters with Low-Noise LDO

    • High-Integration Shrinks Solution Size
    • Performance Designed for Automotive Point-of-Load Regulation
    • Low-Noise Features Improve EMI Performance

    MAX20026S
    Automotive Quad, Low-Voltage Step-Down DC-DC Converters with Low-Noise LDO

    • High-Integration Shrinks Solution Size
    • Performance Designed for Automotive Point-of-Load Regulation
    • Low-Noise Features Improve EMI Performance

    MAX20801
    MPP Tracking DC-DC Converter

    • Performs MPPT on 20-24 Series Connected PV Cells
    • Fast MPPT Reacts Quickly to Changing Conditions
    • Integrated Voltage-Limiting Clamps Output Voltage

    MAX20800
    MPP Tracking DC-DC Converter

    • Performs MPPT on 20-24 Series Connected PV Cells
    • Fast MPPT Reacts Quickly to Changing Conditions
    • Integrated Voltage-Limiting Clamps Output Voltage

    MAX20059
    72V, 1A, Automotive Synchronous Step-Down DC-DC Converter

    • Synchronous DC-DC Converters with Integrated FETs
    • Flexibility
    • Active-Low RESET Output and EN Input (26V max) Simplify Power Sequencing

    MAX20058
    60V, 1A, Automotive Synchronous Step-Down DC-DC Converter

    • Synchronous DC-DC Converters with Integrated FETs
    • Flexibility
    • Active-Low RESET Output and EN Input (26V max) Simplify Power Sequencing

    MAXM15065
    4.5V to 60V, 300mA Step-Down uSLIC Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM15067
    4.5V to 60V, 300mA Step-Down uSLIC Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM15066
    4.5V to 60V, 300mA Step-Down uSLIC Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17904
    4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17905
    4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17906
    4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAX20010C
    Automotive Single 6A Step-Down Converters

    • Fully Integrated, Synchronous 6A DC-DC Converter Enables Small Solution Size
    • High-Precision Voltage Regulator for Applications Processors
    • Low-Noise Feature Reduces EMI

    MAX20010D
    Automotive Single 6A Step-Down Converters

    • Fully Integrated, Synchronous 6A DC-DC Converter Enables Small Solution Size
    • High-Precision Voltage Regulator for Applications Processors
    • Low-Noise Feature Reduces EMI

    MAX20048
    Automotive 40V, 55µA IQ, 2.2MHz, H-Bridge Buck-Boost Controller

    • Meets Stringent Automotive Quality and Reliability Requirements
    • Efficient Solution in a Small Solutions Size
    • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements

    MAX20039
    Automotive, 2V to 36V, 2.2MHz, 0.6A/1.2A Buck-Boost Converters with Integrated H-Bridge Architecture

    • Meets Stringent Automotive Quality and Reliability Requirements
    • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements (B and D version only)
    • High Switching Frequency Allows Use of Small External Components

    MAX20040
    Automotive, 2V to 36V, 2.2MHz, 0.6A/1.2A Buck-Boost Converters with Integrated H-Bridge Architecture

    • Meets Stringent Automotive Quality and Reliability Requirements
    • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements (B and D version only)
    • High Switching Frequency Allows Use of Small External Components

    MAX20029B
    Automotive Quad/Triple/Quad Low-Voltage Step-Down DC-DC Converters

    • Quad Step-Down DC-DC Converters with Integrated FETs
    • Operate from 3.0V to 5.5V Supply Voltage
    • 1.0V to 4.0V Fixed or Adjustable Output Voltage

    MAX20029, MAX20029B, MAX20029C
    Automotive Quad/Triple/Quad Low-Voltage Step-Down DC-DC Converters

    • Quad Step-Down DC-DC Converters with Integrated FETs
    • Operate from 3.0V to 5.5V Supply Voltage
    • 1.0V to 4.0V Fixed or Adjustable Output Voltage

    MAX20029C
    Automotive Quad/Triple/Quad Low-Voltage Step-Down DC-DC Converters

    • Quad Step-Down DC-DC Converters with Integrated FETs
    • Operate from 3.0V to 5.5V Supply Voltage
    • 1.0V to 4.0V Fixed or Adjustable Output Voltage

    MAX77827
    5.5V Input, 1.8A/3.1A Switch Buck-Boost Converter with 6μA IQ

    • 1.8V to 5.5V Input Voltage Range
    • 2.3V to 5.3V Single Resistor Adjustable Output Voltage
    • 1.6A Maximum Output Current (3.1A ILIM Option, Buck Mode)