MAX20019

3.2MHz, 500mA Dual Step-Down Converters for Automotive Cameras

Ultra-Small 3.2MHz Dual 500mA Versatile PMIC for Camera Modules


Please check latest availability status for a specific part variant.

Description

MAX20019/MAX20020 are 2.2MHz and 3.2MHz dual step-down converters with integrated high-side and low-side MOSFETs. The high-voltage step-down converter is designed for continuous operation up to 17V input voltages. The output voltage is factory preset. Buck 1 is preset to 3.3V, 3.0V, or 2.8V. Buck 2 is preset to 1.8V, 1.5V, 1.2V, or 1V. Another option is Buck 1 preset to 5V and Buck 2 preset to 3.3V.

The low-voltage buck features fixed-frequency PWM- mode operation with a switching frequency of 2.2MHz or 3.2MHz. High-frequency operation allows for an all-ceramic capacitor design and small-size external components. The low-resistance on-chip switches ensure high efficiency while minimizing critical inductance. A 500mV enable hysteresis on the MAX20019 allows the use of long, low-cost coax cables, even during slow startup situations. The MAX20020’s Buck 1 starts after VSUP is greater than 5.5V and Buck 1 is driven by the EN input.

Protection features include overvoltage (OV) protection, cycle-by-cycle current limit, and thermal shutdown with automatic recovery. The buck converters operate 180° out-of-phase from each other to minimize input-current ripple.

Design Solution: Provide a Safe Power Path from the Car Battery to Remote Cameras ›

Design Solution: How to Miniaturize Your Automotive Remote Camera ›


MAX20019, MAX20020: Functional Diagrams MAX20019, MAX20020: Functional Diagrams Enlarge+

Key Features

  • Small Solution Size
    • 2mm x 3mm x 0.75mm 10-pin TDFN with an Exposed Pad
    • 2.2MHz and 3.2MHz Operation Allows Smaller System Size
    • No External Components Needed for Soft-Start
  • Cable Flexibility
    • 500mV Enable Hysteresis Allows for Long, Low-Cost Cables During Slow Starts
  • EMI Solutions
    • Optional Spread-Spectrum Frequency Modulation
    • Pinout Placement Allows for Tight PCB Layout of Switching Nodes
  • Self-Protected
    • Overvoltage Protection, Thermal Shutdown, Short-Circuit Protection
  • Automotive Ready
    • Wide 3.5V to 17V Input Voltage Range for Power-Over-Coax
    • Automotive Temperature Range -40°C to +125°C
    • AEC-Q100 Qualified

Applications/Uses

  • Automotive Point-of-Load
  • Surround-View Camera Power Supplies

See parametric specs for Step-Down Switching Regulators (409)


Part NumberVIN
(V)
VIN
(V)
VOUT1
(V)
VOUT1
(V)
IOUT1
(A)
Switch Type
minmaxminmaxmax
MAX20019 3.517150.5Internal
MAX20020 

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

MAX20019EVKIT: Evaluation Kit for the MAX20019/MAX20020
MAX20020EVKIT: Evaluation Kit for the MAX20019/MAX20020

Tools & Models

  • EE-Sim: Design & Simulate MAX20019
  • Request Reliability Report for: MAX20019 
    Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX17783C
    4.5V to 60V, 2.5A, High Efficiency, Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX20028
    Step-Down Controller with Dual 2.1MHz Step-Down DC-DC Converters

    • High-Efficiency Voltage DC-DC Controller Saves Power
    • Dual 2.1MHz DC-DC Converters with Integrated FETs Saves Space
    • High Accuracy to Meet ASIL Specification

    MAX77533
    14V Input, 1.5A High-Efficiency Buck Converter with 9μA IQ

    • 1.5A Single Channel Buck Regulator
    • 3V to 14V Input Voltage Range
    • 0.8V to 99%VSUP Output Voltage Range

    MAX20766
    Smart Slave IC with Integrated Current and Temperature Sensors

    • Increased Power Density with Fewer External Components
    • Accurate Real-Time Telemetry of Critical Parameters
    • Advanced Self-Protection Features for the System and IC

    MAX20796
    Dual-Phase Scalable Integrated Voltage Regulator with PMBus Interface

    • Peak Efficiency 92%; Full-Load Efficiency 90% at VIN = 12V, VOUT = 1V
    • Operating Input Voltage Range 4.5V to 16V
    • Output Voltage Range is 0.5V to 5.5V

    MAX17227A
    400mV to 5.5V Input, 2A nanoPower Boost Converter with Short-Circuit Protection and True Shutdown

    • 350nA Quiescent Supply Current from Output
    • Output Short-Circuit Protection
    • True Shutdown Mode

    MAX20030
    Dual Buck, Sync Boost and LDO–Complete Front-End Power Supply with 17μA IQ

    • Meets Stringent OEM Module Power Consumption and Performance Specifications
    • Enables Crank-Ready Designs
    • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input Voltage Range

    MAX20031
    Dual Buck, Sync Boost and LDO–Complete Front-End Power Supply with 17μA IQ

    • Meets Stringent OEM Module Power Consumption and Performance Specifications
    • Enables Crank-Ready Designs
    • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input Voltage Range

    MAX20710
    Integrated, Step-Down Switching Regulator with PMBus

    • High Power Density and Low Component Count
    • Optimized Component Performance and Efficiency with Reduced Design-In Time
    • Increased Power-Supply Reliability with System and IC Self-Protection Features

    MAX17760
    4.5V to 76V, 300mA, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX20430
    Four-Output Mini PMIC for Safety Applications

    • Multiple Functions for Small Size
    • High-Precision for ASIL Applications
    • Diagnostics and Redundant Circuits

    MAX18066
    High-Efficiency, 4A, Step-Down DC-DC Regulator with Internal Power Switches

    • Feature Integration Shrinks Solution Size
    • High Efficiency Conserves Power
    • Safe, Reliable, Accurate Operation

    MAX18166
    High-Efficiency, 4A, Step-Down DC-DC Regulator with Internal Power Switches

    • Feature Integration Shrinks Solution Size
    • High Efficiency Conserves Power
    • Safe, Reliable, Accurate Operation

    MAX77511
    10V Input, Quad-Phase Configurable, 3A/Phase, High-Efficiency Buck Converter

    • 3A/Phase Configurable Buck Regulator
    • 2.3V to 10V Input Voltage Range
    • 0.25V to 5.2V Output Voltage Range

    MAX77711
    10V Input, Quad-Phase Configurable, 3A/Phase, High-Efficiency Buck Converter

    • 3A/Phase Configurable Buck Regulator
    • 2.3V to 10V Input Voltage Range
    • 0.25V to 5.2V Output Voltage Range

    MAX15158, MAX15158A
    High-Voltage Multiphase Boost Controller

    • Wide Operating Range
    • Integration Reduces Design Footprint
    • Robust Fault Protection Improves Quality and Reliability

    MAX15158A
    High-Voltage Multiphase Boost Controller

    • Wide Operating Range
    • Integration Reduces Design Footprint
    • Robust Fault Protection Improves Quality and Reliability