MAX20014

2.2MHz Sync Boost and Dual Step-Down Converters

Small PMIC for All Automotive Applications


Please check latest availability status for a specific part variant.

Description

The MAX20014 is a high-efficiency three-output low-voltage DC-DC converter. OUT1 boosts the input supply up to 8.5V at up to 750mA, while two synchronous step-down converters operate from a 3.0V to 5.5V input voltage range and provides a 0.8V to 3.8V output voltage range at up to 3A. The boost converter achieves ±2% and the buck converters achieve ±1.5% output error over load, line, and temperature range.

The device features a 2.2MHz fixed-frequency pulse-width modulation (PWM) mode for better noise immunity and load transient response, and a pulse-frequency modulation mode (skip) for increased efficiency during light-load operation. The 2.2MHz frequency operation allows for the use of all-ceramic capacitors and minimizes external components footprint. The programmable spread-spectrum frequency modulation minimizes radiated electromagnetic emissions. Integrated low RDS(ON) switches improve efficiency at heavy loads and make the layout a much simpler task with respect to discrete solutions.

The device is offered with factory-preset output voltages or resistor-adjustable output voltages. Other features include soft-start, overcurrent, and overtemperature protections.

Design Solution: How to Shrink Your ADAS ECUs: Wrap the Power Management Around the Signal Chain ›

MAX20014: Typical Operating Circuit MAX20014: Typical Operating Circuit Enlarge+

Key Features

  • Multiple Functions for Small Size
    • Synchronous 750mA Boost Converter
      • Fixed from 3.8V to 8.5V in 100mV Steps
    • Dual Synchronous Buck Converters Up to 3A
      • Factory-Configurable Output Voltages from 0.8V to 3.8V in 25mV Steps
      • Resistor Adjustable
    • 3.0V to 5.5V Operating Supply Voltage
    • 2.2MHz Operation
    • Undervoltage Threshold of 93% ±3%
    • Overvoltage Threshold of 107% ±3%
    • Individual Active-Low RESET_ Outputs
  • High-Precision
    • ±1.5% Output-Voltage Accuracy
    • Good Load Transient Performance for Buck Converters
  • Robust for the Automotive Environment
    • Current Mode, Forced-PWM, and Skip Operation
    • Overtemperature and Short-Circuit Protection
    • 4mm × 4mm 24-Pin TQFN
    • -40°C to +125°C Automotive Temperature Range

Applications/Uses

  • All Automotive
Part NumberPrimary TopologyMonitor/Control FeaturesDC-DC/Power FeaturesVIN
(V)
VIN
(V)
VOUT
(V)
VOUT
(V)
Max. IOUT
(A)
Max. IOUT
(A)
Oper. Freq.
(kHz)
Package/Pins
minmaxminmax
MAX20014 
Step-Down
Step-Up
Dynamic V Adj.
External Synch.
Low Batt./POK Output
Output OVP
Output UVP
Reset Output
Shutdown
Avg. Current Mode Control
Current Limit
Fixed Freq./PWM
Internal Switch
Soft Start
Sync. Rectifier
35.50.83.833
2000
2200
TQFN/24
See All Multifunction PMICs (81)

Part NumberVIN
(V)
VIN
(V)
VOUT1
(V)
VOUT1
(V)
Preset VOUT
(V)
VOUT1 Tolerance
(±%)
IOUT1
(A)
IOUT1
(A)
Output Adjust. MethodSwitch TypeSynchronous SwitchingPower Good SignalAlternate TopologyOper. Freq.
(kHz)
Design ToolsPackage/PinsOper. Temp.
(°C)
minmaxminmax
MAX20014 35.50.88.5
1.2
1.8
2.5
2.8
2.85
3.3
5
20.83
Preset
Resistor
InternalYesYes
Step-Down
Step-Up
2000
2200
EE-Sim
TQFN/24
-40 to +85
-40 to +100
-40 to +105
-40 to +125
See All Step-Down/Up Switching Regulators (28)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX20014EVKIT: Evaluation Kit for the MAX20014

Tools & Models

  • EE-Sim: Design & Simulate MAX20014
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAXM15465
    4.5V to 42V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM15466
    4.5V to 42V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM15467
    4.5V to 42V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17624
    2.9V to 5.5V, 1A Himalaya uSLIC Step-Down Power Modules

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17623
    2.9V to 5.5V, 1A Himalaya uSLIC Step-Down Power Modules

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAX20049
    Flexible, Compact Quad Power Supply with 2.2MHz, 500mA Buck Converters and Dual LDOs for Automotive Camera Modules

    • Small Solution Size
    • EMI Solutions
    • Self-Protected and Robust

    MAX17673
    Integrated 4.5V to 60V Synchronous 1.5A HV Buck and Dual 2.7V to 5.5V, 1A Buck Regulators

    • Reduces External Components and Total Cost
    • Integrates Three DC-DC Regulators
    • Reduces Power Dissipation

    MAX77813
    High-Efficiency Buck-Boost Converter

    • VIN Range: 2.30V to 5.5V
    • VOUT Range: 2.60V to 5.14V (I2C Programmable in 20mV Step)
    • Up to 2A Output Current in Boost Mode (VIN = 3.0V, VOUT = 3.4V, ILIM = High)

    MAX38640A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38641A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38642A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38642, MAX38642A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38643, MAX38643A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38643A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38641, MAX38641A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX5995A
    IEEE 802.3bt-Compliant, Powered Device Interface Controllers with Integrated 91W High-Power MOSFET

    • IEEE 802.3af/at/bt Compliant
    • Type 1~4 PSE Classification Indicator or an External Wall Adapter Indicator Output
    • Simplified Wall Adapter Interface

    MAX5995B
    IEEE 802.3bt-Compliant, Powered Device Interface Controllers with Integrated 91W High-Power MOSFET

    • IEEE 802.3af/at/bt Compliant
    • Type 1~4 PSE Classification Indicator or an External Wall Adapter Indicator Output
    • Simplified Wall Adapter Interface

    MAX5995C
    IEEE 802.3bt-Compliant, Powered Device Interface Controllers with Integrated 91W High-Power MOSFET

    • IEEE 802.3af/at/bt Compliant
    • Type 1~4 PSE Classification Indicator or an External Wall Adapter Indicator Output
    • Simplified Wall Adapter Interface

    MAX20004
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20008
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20006
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20077
    36V, 2.5A Mini Buck Converter with 3.5uA IQ

    • Synchronous DC-DC Converter with Integrated FETs
    • Small Solution Size Saves Space
    • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing

    MAX25277
    36V, 2.5A Mini Buck Converter with 3.5uA IQ

    • Synchronous DC-DC Converter with Integrated FETs
    • Small Solution Size Saves Space
    • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing