MAX20003

36V, 220kHz to 2.2MHz, 2A/3A Fully Integrated Step-Down Converters with 15µA Operating Current

2A/3A Automotive Synchronous Step-Down Converter with Low IQ


Please check latest availability status for a specific part variant.

Description

The MAX20002/MAX20003 are small, synchronous buck converters with integrated high-side and low-side MOSFETs. Each device is designed to deliver up to 2A/3A with input voltages from 3.5V to 36V, while using only 15µA quiescent current at no load. Voltage quality can be monitored by observing the PGOOD signal. The devices can operate in dropout by running at 98% duty cycle, making them ideal for automotive applications.

The devices offer fixed output voltages of 5V/3.3V, along with the ability to program the output voltage between 1V to 10V. Frequency can be programmed using a resistor to ground on the FOSC pin from 220kHz to 2.2MHz. The devices offer a forced fixed-frequency mode and skip mode with ultra-low quiescent current of 15µA. They have a pin that can be programmed to turn on/off the spread spectrum, further helping systems designers with better EMC management.

The MAX20002/MAX20003 are available in a small 5mm x 5mm 20-pin TQFN package with exposed pad and use very few external components.
MAX20002, MAX20003: Typical Application Circuit/Block Diagram MAX20002, MAX20003: Typical Application Circuit/Block Diagram Enlarge+

Key Features

  • Synchronous DC-DC Converter with Integrated FETs
    • MAX20002 = 2A
    • MAX20003 = 3A
    • 15µA Quiescent Current When in Standby Mode
  • Small Solution Size Saves Space
    • 220kHz to 2.2MHz Adjustable Frequency
    • Programmable 1V to 10V Output for the Buck or Fixed 5V/3.3V Options Available
    • Fixed 8ms Internal Soft-Start
    • Fixed Output Voltage with ±2% Output Accuracy (5V/3.3V) or Externally Resistor Adjustable (1V to 10V) with ±1% FB Accuracy
  • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing
  • Protection Features and Operating Range Ideal for Automotive Applications
    • Operating VIN Range of 3.5V to 36V
    • 42V Load-Dump Protection
    • 99% Duty-Cycle Operation with Low Dropout
    • -40°C to +125°C Automotive Temperature Range
    • AEC-Q100 Qualified
    • Fast and Accurate Overvoltage Protection Enables Fast Recovery from Automotive Transients (MAX20002C/D/MAX20003C/D)

Applications/Uses

  • Distributed DC Power Systems
  • Navigation and Radio Head Units
  • Point-of-Load Applications in Automotive
Part NumberVIN
(V)
VIN
(V)
VOUT1
(V)
VOUT1
(V)
Preset VOUT
(V)
Output Adjust. MethodIOUT1
(A)
Switch TypeSynchronous SwitchingPower Good SignalDC-DC OutputsOper. Freq.
(kHz)
Design ToolsPackage/PinsBudgetary
Price
minmaxminmaxSee Notes
MAX20002 3.536110
3.3
5
Resistor2InternalYesYes1
220
2200
EE-Sim
TQFN-CU/20
$2.62 @1k
MAX20002C 
3.3
4.2
5
Preset
Resistor
2-
SOIC(N)/8
MAX20003 
3.3
5
Resistor3EE-Sim
TQFN-CU/20
MAX20003C 
3.3
4.2
5
Preset
Resistor
3-
SOIC(N)/8
See All Step-Down Switching Regulators (380)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX20003EVKIT: Evaluation Kit for the MAX20002 and MAX20003

Technical Documents

App Note 6632 How to Design an Automotive TFT Display System

Quality and Environmental Data

Request Reliability Report for: MAX20003 
Lead-Free Package Tin (Sn) Whisker Reports

Tools & Models

  • EE-Sim: Design & Simulate MAX20003
  • MAX20003 SIMPLIS Schematic
  • CAD Symbols and Footprints

  • MAX20003ATPA/V+
  • MAX20003ATPA/V+T
  • MAX20003ATPB/V+
  • MAX20003ATPB/V+T
  • MAX20003CATPA/V+
  • MAX20003CATPA/V+T
  • MAX20003CATPB/V+
  • MAX20003CATPB/V+T
  • MAX20003CATPC/V+
  • MAX20003CATPC/V+T
  • MAX20003CATPD/V+
  • MAX20003CATPD/V+T
  • MAX20003DATPA/VY+
  • MAX20003DATPA/VY+T
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX77501
    110VPK-PK High-Efficiency Piezo Haptic Actuator Boost Driver

    • 110VPK-PK Haptic Waveforms Generation
    • Optimized for up to 2µF Haptic Piezo Actuator
    • 2.8V to 5.5V Input Supply Range

    MAX20457
    36V Dual 3.5A/2A Synchronous Buck Converters for Automotive Applications

    • Meets Stringent OEM Module Power Consumption and Performance Specifications
    • Enables Crank-Ready Designs
    • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input-Voltage Range

    MAXM17536
    4.5V to 60V, 4A High-Efficiency, DC-DC Step-Down SiP Power Module with Integrated Inductor

    • Reduces Design Complexity, Manufacturing Risks, and Time-to-Market
    • Saves Board Space in Space-Constrained Applications
    • Offers Flexibility for Power-Design Optimization

    MAX17576
    4.5V to 60V, 4A, High-Efficiency, Synchronous Step-Down DC-DC Converter with Internal Compensation

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX20412
    Automotive Low-Voltage 2-Channel Step-Down Controller

    • 2-Channel, High-Efficiency DC-DC Controller in a Small Solution Size
    • High-Precision Regulator for Applications Processors
    • Low-Noise Features Reduce EMI

    MAX20343
    Ultra-Low Quiescent Current, Low Noise 3.5W Buck-Boost Regulator

    • Extend System Run Time
    • Low, Continuous Noise Profile
    • Adaptable Load Transient Response

    MAX20004E
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20006E
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20008E
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX17630
    4.5V to 36V, 1A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX20011
    Automotive Single 8A/12A Step-Down Converter with High Efficiency

    • High-Efficiency DC-DC Converter
    • Up to 12A peak output current:
    • Differential Remote Voltage Sensing

    MAX15158Z
    High-Voltage Multiphase Boost Controller

    • Wide Operating Range
    • Integration Reduces Design Footprint
    • Robust Fault Protection Improves Quality and Reliability

    MAX20079
    Automotive 36V 3.5A Buck Converter with 3.5μA IQ

    • Synchronous DC-DC Converter with Integrated FETs
    • Small Solution Size Saves Space
    • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing

    MAX20026, MAX20026S
    Automotive Quad, Low-Voltage Step-Down DC-DC Converters with Low-Noise LDO

    • High-Integration Shrinks Solution Size
    • Performance Designed for Automotive Point-of-Load Regulation
    • Low-Noise Features Improve EMI Performance

    MAX20026S
    Automotive Quad, Low-Voltage Step-Down DC-DC Converters with Low-Noise LDO

    • High-Integration Shrinks Solution Size
    • Performance Designed for Automotive Point-of-Load Regulation
    • Low-Noise Features Improve EMI Performance

    MAX20801
    MPP Tracking DC-DC Converter

    • Performs MPPT on 20-24 Series Connected PV Cells
    • Fast MPPT Reacts Quickly to Changing Conditions
    • Integrated Voltage-Limiting Clamps Output Voltage

    MAX20800
    MPP Tracking DC-DC Converter

    • Performs MPPT on 20-24 Series Connected PV Cells
    • Fast MPPT Reacts Quickly to Changing Conditions
    • Integrated Voltage-Limiting Clamps Output Voltage

    MAX20059
    72V, 1A, Automotive Synchronous Step-Down DC-DC Converter

    • Synchronous DC-DC Converters with Integrated FETs
    • Flexibility
    • Active-Low RESET Output and EN Input (26V max) Simplify Power Sequencing

    MAX20058
    60V, 1A, Automotive Synchronous Step-Down DC-DC Converter

    • Synchronous DC-DC Converters with Integrated FETs
    • Flexibility
    • Active-Low RESET Output and EN Input (26V max) Simplify Power Sequencing

    MAXM15067
    4.5V to 60V, 300mA Step-Down uSLIC Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM15065
    4.5V to 60V, 300mA Step-Down uSLIC Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM15066
    4.5V to 60V, 300mA Step-Down uSLIC Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17904
    4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17905
    4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17906
    4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAX20010C
    Automotive Single 6A Step-Down Converters

    • Fully Integrated, Synchronous 6A DC-DC Converter Enables Small Solution Size
    • High-Precision Voltage Regulator for Applications Processors
    • Low-Noise Feature Reduces EMI

    MAX20010D
    Automotive Single 6A Step-Down Converters

    • Fully Integrated, Synchronous 6A DC-DC Converter Enables Small Solution Size
    • High-Precision Voltage Regulator for Applications Processors
    • Low-Noise Feature Reduces EMI

    MAX20048
    Automotive 40V, 55µA IQ, 2.2MHz, H-Bridge Buck-Boost Controller

    • Meets Stringent Automotive Quality and Reliability Requirements
    • Efficient Solution in a Small Solutions Size
    • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements

    MAX20040
    Automotive, 2V to 36V, 2.2MHz, 0.6A/1.2A Buck-Boost Converters with Integrated H-Bridge Architecture

    • Meets Stringent Automotive Quality and Reliability Requirements
    • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements (B and D version only)
    • High Switching Frequency Allows Use of Small External Components

    MAX20039
    Automotive, 2V to 36V, 2.2MHz, 0.6A/1.2A Buck-Boost Converters with Integrated H-Bridge Architecture

    • Meets Stringent Automotive Quality and Reliability Requirements
    • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements (B and D version only)
    • High Switching Frequency Allows Use of Small External Components

    MAX20029B
    Automotive Quad/Triple/Quad Low-Voltage Step-Down DC-DC Converters

    • Quad Step-Down DC-DC Converters with Integrated FETs
    • Operate from 3.0V to 5.5V Supply Voltage
    • 1.0V to 4.0V Fixed or Adjustable Output Voltage

    MAX20029C
    Automotive Quad/Triple/Quad Low-Voltage Step-Down DC-DC Converters

    • Quad Step-Down DC-DC Converters with Integrated FETs
    • Operate from 3.0V to 5.5V Supply Voltage
    • 1.0V to 4.0V Fixed or Adjustable Output Voltage

    MAX20029, MAX20029B, MAX20029C
    Automotive Quad/Triple/Quad Low-Voltage Step-Down DC-DC Converters

    • Quad Step-Down DC-DC Converters with Integrated FETs
    • Operate from 3.0V to 5.5V Supply Voltage
    • 1.0V to 4.0V Fixed or Adjustable Output Voltage

    MAX77827
    5.5V Input, 1.8A/3.1A Switch Buck-Boost Converter with 6μA IQ

    • 1.8V to 5.5V Input Voltage Range
    • 2.3V to 5.3V Single Resistor Adjustable Output Voltage
    • 1.6A Maximum Output Current (3.1A ILIM Option, Buck Mode)