MAX1881

Quad-Output TFT LCD DC-DC Converters with Buffer


Please check latest availability status for a specific part variant.

Description

The MAX1778/MAX1880–MAX1885 multiple-output DC-DC converters provide the regulated voltages required by active matrix thin-film transistor (TFT) liquid crystal displays (LCD) in a low-profile TSSOP package. One high-power step-up converter and two low-power charge pumps convert the 2.7V to 5.5V input voltage into three independent output voltages. A built-in linear regulator and VCOM buffer complete the power-supply requirements.

The main step-up converter accurately generates an externally set output voltage up to 13V that can supply the display's row/column drivers. The converter's high switching frequency and current-mode PWM architecture provide fast transient response and allow the use of small low-profile inductors and ceramic capacitors. The low-power BiCMOS control circuitry and internal 14V switch (0.35≈ N-channel MOSFET) enable efficiencies up to 91%.

The dual low-power charge pumps (MAX1778/ MAX1880/MAX1881/MAX1882 only) independently regulate one positive output (VPOS) and one negative output (VNEG). These low-power outputs use external diode and capacitor stages (as many stages as required) to regulate output voltages up to +40V and -40V. A unique control scheme minimizes output ripple as well as capacitor sizes for both charge pumps.

A resistor-programmable, 40mA, low-dropout linear regulator (MAX1778/MAX1881/MAX1883/MAX1884 only) provides preregulation or postregulation for any of the supplies. For higher current applications, an external transistor can be added. Additionally, the VCOM buffer provides a high current output that is ideal for driving the capacitive backplane of TFT LCD panels. The VCOM buffer's output voltage is preset with an internal 50% resistive-divider or can be externally adjusted for other voltages.

The MAX1778/MAX1880–MAX1885 are protected against output undervoltage and thermal overload conditions by a latched fault detection circuit that shuts down the device. All devices are available in the ultra-thin TSSOP package (1.1mm max height).
MAX1778, MAX1880, MAX1881, MAX1882, MAX1883, MAX1884, MAX1885: Typical Operating Circuit MAX1778, MAX1880, MAX1881, MAX1882, MAX1883, MAX1884, MAX1885: Typical Operating Circuit Enlarge+

Key Features

  • 500kHz/1MHz Current-Mode PWM Step-Up Regulator
    • Up to +13V Main High-Power Output
    • ±1% Accurate
    • High Efficiency (91%)
  • Dual Regulated Charge-Pump Outputs (MAX1778/MAX1880–MAX1882 only)
    • Up to +40V Positive Charge-Pump Output
    • Up to -40V Negative Charge-Pump Output
  • Low-Dropout 40mA Linear Regulator (MAX1778/MAX1881/MAX1883/MAX1884 only)
    • Up to +15V LDO Input
  • Optional Higher Current with External Transistor
  • 2.7V to 5.5V Input Supply
  • Internal Supply Sequencing and Soft-Start
  • Power-Ready Output
  • Adjustable Fault-Detection Latch
  • Thermal Protection (+160°C)
  • 0.1µA Shutdown Current
  • 0.7mA IN Quiescent Current
  • Ultra-Small External Components
  • Thin TSSOP Package (1.1mm max height)

Applications/Uses

  • TFT LCD Desktop Monitor Panels
  • TFT LCD Notebook Displays

Quality and Environmental Data

Request Reliability Report for: MAX1881 
Lead-Free Package Tin (Sn) Whisker Reports
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX17631
4.5V to 36V, 1.5A, High-Efficiency, Synchronous Step-Down DC-DC Converter

  • Reduces External Components and Total Cost
  • Reduces Number of DC-DC Regulators to Stock
  • Reduces Power Dissipation

MAX17634A
4.5V to 36V, 4.25A, High-Efficiency, Synchronous Step-Down DC-DC Converter

  • Reduces External Components and Total Cost
  • Reduces Number of DC-DC Regulators to Stock
  • Reduces Power Dissipation

MAX17634B
4.5V to 36V, 4.25A, High-Efficiency, Synchronous Step-Down DC-DC Converter

  • Reduces External Components and Total Cost
  • Reduces Number of DC-DC Regulators to Stock
  • Reduces Power Dissipation

MAX17634C
4.5V to 36V, 4.25A, High-Efficiency, Synchronous Step-Down DC-DC Converter

  • Reduces External Components and Total Cost
  • Reduces Number of DC-DC Regulators to Stock
  • Reduces Power Dissipation

MAX77501
110VPK-PK High-Efficiency Piezo Haptic Actuator Boost Driver

  • 110VPK-PK Haptic Waveforms Generation
  • Optimized for up to 2µF Haptic Piezo Actuator
  • 2.8V to 5.5V Input Supply Range

MAX20457
36V Dual 3.5A/2A Synchronous Buck Converters for Automotive Applications

  • Meets Stringent OEM Module Power Consumption and Performance Specifications
  • Enables Crank-Ready Designs
  • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input-Voltage Range

MAXM17536
4.5V to 60V, 4A High-Efficiency, DC-DC Step-Down SiP Power Module with Integrated Inductor

  • Reduces Design Complexity, Manufacturing Risks, and Time-to-Market
  • Saves Board Space in Space-Constrained Applications
  • Offers Flexibility for Power-Design Optimization

MAX17576
4.5V to 60V, 4A, High-Efficiency, Synchronous Step-Down DC-DC Converter with Internal Compensation

  • Reduces External Components and Total Cost
  • Reduces Number of DC-DC Regulators to Stock
  • Reduces Power Dissipation

MAX20412
Automotive Low-Voltage 2-Channel Step-Down Controller

  • 2-Channel, High-Efficiency DC-DC Controller in a Small Solution Size
  • High-Precision Regulator for Applications Processors
  • Low-Noise Features Reduce EMI

MAX20343
Ultra-Low Quiescent Current, Low Noise 3.5W Buck-Boost Regulator

  • Extend System Run Time
  • Low, Continuous Noise Profile
  • Adaptable Load Transient Response

MAX20004E
36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

  • Multiple Functions for Small Size
  • High Precision
  • Robust for the Automotive Environment

MAX20006E
36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

  • Multiple Functions for Small Size
  • High Precision
  • Robust for the Automotive Environment

MAX20008E
36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

  • Multiple Functions for Small Size
  • High Precision
  • Robust for the Automotive Environment

MAX17630
4.5V to 36V, 1A, High-Efficiency, Synchronous Step-Down DC-DC Converter

  • Reduces External Components and Total Cost
  • Reduces Number of DC-DC Regulators to Stock
  • Reduces Power Dissipation

MAX20011
Automotive Single 8A/12A Step-Down Converter with High Efficiency

  • High-Efficiency DC-DC Converter
  • Up to 12A peak output current:
  • Differential Remote Voltage Sensing

MAX15158Z
High-Voltage Multiphase Boost Controller

  • Wide Operating Range
  • Integration Reduces Design Footprint
  • Robust Fault Protection Improves Quality and Reliability

MAX20079
Automotive 36V 3.5A Buck Converter with 3.5μA IQ

  • Synchronous DC-DC Converter with Integrated FETs
  • Small Solution Size Saves Space
  • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing

MAX20026, MAX20026S
Automotive Quad, Low-Voltage Step-Down DC-DC Converters with Low-Noise LDO

  • High-Integration Shrinks Solution Size
  • Performance Designed for Automotive Point-of-Load Regulation
  • Low-Noise Features Improve EMI Performance

MAX20026S
Automotive Quad, Low-Voltage Step-Down DC-DC Converters with Low-Noise LDO

  • High-Integration Shrinks Solution Size
  • Performance Designed for Automotive Point-of-Load Regulation
  • Low-Noise Features Improve EMI Performance

MAX20801
MPP Tracking DC-DC Converter

  • Performs MPPT on 20-24 Series Connected PV Cells
  • Fast MPPT Reacts Quickly to Changing Conditions
  • Integrated Voltage-Limiting Clamps Output Voltage

MAX20800
MPP Tracking DC-DC Converter

  • Performs MPPT on 20-24 Series Connected PV Cells
  • Fast MPPT Reacts Quickly to Changing Conditions
  • Integrated Voltage-Limiting Clamps Output Voltage

MAX20059
72V, 1A, Automotive Synchronous Step-Down DC-DC Converter

  • Synchronous DC-DC Converters with Integrated FETs
  • Flexibility
  • Active-Low RESET Output and EN Input (26V max) Simplify Power Sequencing

MAX20058
60V, 1A, Automotive Synchronous Step-Down DC-DC Converter

  • Synchronous DC-DC Converters with Integrated FETs
  • Flexibility
  • Active-Low RESET Output and EN Input (26V max) Simplify Power Sequencing

MAXM15065
4.5V to 60V, 300mA Step-Down uSLIC Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAXM15067
4.5V to 60V, 300mA Step-Down uSLIC Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAXM15066
4.5V to 60V, 300mA Step-Down uSLIC Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAXM17904
4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAXM17905
4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAXM17906
4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAX20010C
Automotive Single 6A Step-Down Converters

  • Fully Integrated, Synchronous 6A DC-DC Converter Enables Small Solution Size
  • High-Precision Voltage Regulator for Applications Processors
  • Low-Noise Feature Reduces EMI

MAX20010D
Automotive Single 6A Step-Down Converters

  • Fully Integrated, Synchronous 6A DC-DC Converter Enables Small Solution Size
  • High-Precision Voltage Regulator for Applications Processors
  • Low-Noise Feature Reduces EMI

MAX20048
Automotive 40V, 55µA IQ, 2.2MHz, H-Bridge Buck-Boost Controller

  • Meets Stringent Automotive Quality and Reliability Requirements
  • Efficient Solution in a Small Solutions Size
  • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements

MAX20039
Automotive, 2V to 36V, 2.2MHz, 0.6A/1.2A Buck-Boost Converters with Integrated H-Bridge Architecture

  • Meets Stringent Automotive Quality and Reliability Requirements
  • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements (B and D version only)
  • High Switching Frequency Allows Use of Small External Components

MAX20040
Automotive, 2V to 36V, 2.2MHz, 0.6A/1.2A Buck-Boost Converters with Integrated H-Bridge Architecture

  • Meets Stringent Automotive Quality and Reliability Requirements
  • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements (B and D version only)
  • High Switching Frequency Allows Use of Small External Components

MAX20029B
Automotive Quad/Triple/Quad Low-Voltage Step-Down DC-DC Converters

  • Quad Step-Down DC-DC Converters with Integrated FETs
  • Operate from 3.0V to 5.5V Supply Voltage
  • 1.0V to 4.0V Fixed or Adjustable Output Voltage

MAX20029, MAX20029B, MAX20029C
Automotive Quad/Triple/Quad Low-Voltage Step-Down DC-DC Converters

  • Quad Step-Down DC-DC Converters with Integrated FETs
  • Operate from 3.0V to 5.5V Supply Voltage
  • 1.0V to 4.0V Fixed or Adjustable Output Voltage

MAX20029C
Automotive Quad/Triple/Quad Low-Voltage Step-Down DC-DC Converters

  • Quad Step-Down DC-DC Converters with Integrated FETs
  • Operate from 3.0V to 5.5V Supply Voltage
  • 1.0V to 4.0V Fixed or Adjustable Output Voltage

MAX77827
5.5V Input, 1.8A/3.1A Switch Buck-Boost Converter with 6μA IQ

  • 1.8V to 5.5V Input Voltage Range
  • 2.3V to 5.3V Single Resistor Adjustable Output Voltage
  • 1.6A Maximum Output Current (3.1A ILIM Option, Buck Mode)