Product Details
Key Features
Applications/Uses
VIN (V) (min) | 2.6 |
VIN (V) (max) | 5.5 |
VOUT1 (V) (min) | 1.25 |
VOUT1 (V) (max) | 5.5 |
IOUT1 (A) (max) | 0.6 |
Switch Type | Internal |
Output Adjust. Method | Resistor |
Synchronous Switching? | Yes |
# DC-DC Outputs | 1 |
Switching Frequency (kHz) | 1000 |
Package/Pins | UMAX/10 |
Budgetary Price (See Notes) | 2.05 |
Simplified Block Diagram
Technical Docs
Data Sheet | WCDMA Cellular Phone 600mA Buck Regulators | Jul 04, 2005 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.
Parameters
VIN (V) (min) | 2.6 |
VIN (V) (max) | 5.5 |
VOUT1 (V) (min) | 1.25 |
VOUT1 (V) (max) | 5.5 |
IOUT1 (A) (max) | 0.6 |
Switch Type | Internal |
Output Adjust. Method | Resistor |
Synchronous Switching? | Yes |
# DC-DC Outputs | 1 |
Switching Frequency (kHz) | 1000 |
Package/Pins | UMAX/10 |
Budgetary Price (See Notes) | 2.05 |
Key Features
- Dynamically Adjustable Output from 0.4V to 3.4V (MAX1820)
- Programmable Output from 1.25V to 5.5V (MAX1821)
- SYNC to 13MHz External Clock (MAX1820X)
- SYNC to 19.8MHz External Clock (MAX1820Y)
- NO SYNC, Internal 1MHz Oscillator (MAX1820Z)
- Low Quiescent Current
- 180µA (typ) in Skip Mode
- 0.1µA (typ) in Shutdown Mode
- No External Schottky Diode Required
- 600mA Guaranteed Output Current
- 0% to 100% Duty-Cycle Operation
- 150mV Dropout at 600mA Load (Including RDC of External Inductor)
- µMAX or UCSP Packaging
Applications/Uses
- Digital Still Cameras
- Handheld Instruments (PDAs, Palmtops)
- Microprocessor Core Supplies
- PCMCIA and Network Cards
- PDA, Palmtop, and Notebook Computers
- WCDMA Cell Phone Power Amplifiers
Description
The MAX1820 is dynamically controlled to provide varying output voltages from 0.4V to 3.4V. The circuit is designed such that the output voltage settles in <30µs for a full-scale change in voltage and current. The MAX1821 is set with external resistors to provide any fixed output voltage in the 1.25V to 5.5V range.
The MAX1820/MAX1821 include a low on-resistance internal MOSFET switch and synchronous rectifier to maximize efficiency and minimize external component count; 100% duty-cycle operation allows for low dropout of only 150mV at 600mA load, including the external inductor resistance. The devices are offered in 10-pin µMAX® and tiny 3 x 4 chip-scale (UCSP™) packages.
Technical Docs
Data Sheet | WCDMA Cellular Phone 600mA Buck Regulators | Jul 04, 2005 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.