MAX17670

Integrated 4V-60V, 150mA, High-Efficiency, Synchronous Step-Down DC-DC Converter with 50mA Linear Regulator

Highly Integrated Industrial PMIC Enables Small Solution Size


Please check latest availability status for a specific part variant.

Description

The Himalaya series of voltage regulator ICs, power modules, and chargers enable cooler, smaller, and simpler power-supply solutions. MAX17670, MAX17671, and MAX17672 are dual-output regulators integrating a 4V to 60V, 150mA high-voltage, high-efficiency, Himalaya synchronous step-down converter with internal MOSFETs and a high-PSRR, low-noise, 2.35V to 5.5V, 50mA linear regulator. The MAX17670 and MAX17671 provide fixed step-down converter output voltages of 3.3V and 5V, respectively. The output voltage of the MAX17672 step-down converter is adjustable (0.8V up to 90% of VIN). 3.3V (MAX17671 and MAX17672 only), 3.0V, 2.5V, 1.8V, 1.5V, and 1.2V linear regulator output voltage options are supported.

The feedback-voltage regulation accuracy over -40°C to +125°C temperature range for the linear regulator is ±1.3% and for the step-down converter is ±2%. The devices are available in a compact 10-pin (3mm x 3mm) TDFN package. Simulation models are available.

MAX17670, MAX17671, MAX17672: Simplified Application Circuit MAX17670, MAX17671, MAX17672: Simplified Application Circuit Enlarge+

Key Features

  • Reduces External Components and Total Cost
    • No Schottky–Synchronous Operation
    • Internal Compensation
    • Built-In Soft-Start
    • All-Ceramic Capacitors, Compact Layout
    • Protection against Inductive Short at Step-Down Converter Output
  • Reduces Number of DC-DC Regulators to Stock
    • Wide 4V to 60V Input Range for the Step-Down Converter Regulator
    • Up to 98% Duty-Cycle Step-Down Operation
    • 200kHz to 2.2MHz Adjustable Switching Frequency with External Synchronization for Step-down Converter
    • 2.35V to 5.5V Input Range for the Linear Regulator
    • Linear Regulator with up to 50mA Load Current Capability
  • Reduces Power Dissipation
    • 50μA No-Load Supply Current
    • PFM Enables Enhanced Light-Load Efficiency
    • 2.5μA Shutdown Current
    • Bootstrap Bias Input for Improved Efficiency
  • Reliable Operation in Adverse Environments
    • Peak Current-Limit Protection
    • Built-In Output-Voltage Monitoring with active-low RESET
    • Resistor Programmable EN/UVLO Threshold
    • Monotonic Startup into Prebiased Load
    • Overtemperature Protection
    • High Industrial -40°C to +125°C Ambient Operating Temperature Range / -40°C to +150°C Junction Temperature Range

Applications/Uses

  • Battery-Powered Equipment
  • High-Voltage Linear Regulator Replacement
  • HVAC and Building Control
  • Industrial Sensors and Process Control

See parametric specs for Step-Down Switching Regulators (409)


Part NumberVIN
(V)
VIN
(V)
VOUT1
(V)
IOUT1
(A)
(min)(max)(min)(max)
MAX17670 4600.80.15
MAX17671 5
MAX17672 0.8

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

MAX17671FEVKIT: Evaluation Kit for the MAX17671 5V Step-Down Converter and 3.3V Linear Regulator Output Voltage Application
MAX17670EEVKIT: Evaluation Kit for the MAX17670 3.3V Step-Down Converter Output Voltage and 3.0V Linear Regulator Output Voltage Application
MAX17672CEVKIT: Evaluation Kit for the MAX17672 5V Buck Output Voltage and 1.8V Linear Regulator Output Voltage

Tools & Models

  • EE-Sim: Design & Simulate MAX17670
  • MAX17670 SIMPLIS Schematic
  • Request Reliability Report for: MAX17670 
    Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX38886
    2.5V to 5.0V, 0.5A/2.5A, Charge/Discharge Regulator for Supercapacitor Backup Applications

    • 2.5V to 5V System Output Voltage
    • Up to 4.5V Capacitor Voltage Range
    • Up to 2.5A Peak Inductor Discharge Current

    MAX17783C
    4.5V to 60V, 2.5A, High Efficiency, Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX20028
    Step-Down Controller with Dual 2.1MHz Step-Down DC-DC Converters

    • High-Efficiency Voltage DC-DC Controller Saves Power
    • Dual 2.1MHz DC-DC Converters with Integrated FETs Saves Space
    • High Accuracy to Meet ASIL Specification

    MAX77533
    14V Input, 1.5A High-Efficiency Buck Converter with 9μA IQ

    • 1.5A Single Channel Buck Regulator
    • 3V to 14V Input Voltage Range
    • 0.8V to 99%VSUP Output Voltage Range

    MAX20766
    Smart Slave IC with Integrated Current and Temperature Sensors

    • Increased Power Density with Fewer External Components
    • Accurate Real-Time Telemetry of Critical Parameters
    • Advanced Self-Protection Features for the System and IC

    MAX20796
    Dual-Phase Scalable Integrated Voltage Regulator with PMBus Interface

    • Peak Efficiency 92%; Full-Load Efficiency 90% at VIN = 12V, VOUT = 1V
    • Operating Input Voltage Range 4.5V to 16V
    • Output Voltage Range is 0.5V to 5.5V

    MAX17227A
    400mV to 5.5V Input, 2A nanoPower Boost Converter with Short-Circuit Protection and True Shutdown

    • 350nA Quiescent Supply Current from Output
    • Output Short-Circuit Protection
    • True Shutdown Mode

    MAX20030
    Dual Buck, Sync Boost and LDO–Complete Front-End Power Supply with 17μA IQ

    • Meets Stringent OEM Module Power Consumption and Performance Specifications
    • Enables Crank-Ready Designs
    • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input Voltage Range

    MAX20031
    Dual Buck, Sync Boost and LDO–Complete Front-End Power Supply with 17μA IQ

    • Meets Stringent OEM Module Power Consumption and Performance Specifications
    • Enables Crank-Ready Designs
    • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input Voltage Range

    MAX25431
    Automotive 40V, 2.2MHz, H-Bridge Buck-Boost Controller

    • Meets Stringent Automotive Quality and Reliability Requirements
    • Efficient Solution in a Small Solutions Size
    • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements

    MAX20710
    Integrated, Step-Down Switching Regulator with PMBus

    • High Power Density and Low Component Count
    • Optimized Component Performance and Efficiency with Reduced Design-In Time
    • Increased Power-Supply Reliability with System and IC Self-Protection Features

    MAX17760
    4.5V to 76V, 300mA, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX20430
    Four-Output Mini PMIC for Safety Applications

    • Multiple Functions for Small Size
    • High-Precision for ASIL Applications
    • Diagnostics and Redundant Circuits

    MAX18066
    High-Efficiency, 4A, Step-Down DC-DC Regulator with Internal Power Switches

    • Feature Integration Shrinks Solution Size
    • High Efficiency Conserves Power
    • Safe, Reliable, Accurate Operation

    MAX18166
    High-Efficiency, 4A, Step-Down DC-DC Regulator with Internal Power Switches

    • Feature Integration Shrinks Solution Size
    • High Efficiency Conserves Power
    • Safe, Reliable, Accurate Operation

    MAX77511
    10V Input, Quad-Phase Configurable, 3A/Phase, High-Efficiency Buck Converter

    • 3A/Phase Configurable Buck Regulator
    • 2.3V to 10V Input Voltage Range
    • 0.25V to 5.2V Output Voltage Range

    MAX77711
    10V Input, Quad-Phase Configurable, 3A/Phase, High-Efficiency Buck Converter

    • 3A/Phase Configurable Buck Regulator
    • 2.3V to 10V Input Voltage Range
    • 0.25V to 5.2V Output Voltage Range

    MAX15158, MAX15158A
    High-Voltage Multiphase Boost Controller

    • Wide Operating Range
    • Integration Reduces Design Footprint
    • Robust Fault Protection Improves Quality and Reliability

    MAX15158A
    High-Voltage Multiphase Boost Controller

    • Wide Operating Range
    • Integration Reduces Design Footprint
    • Robust Fault Protection Improves Quality and Reliability

    Type ID Title
    Evaluation Board9952MAX17671FEVKIT Evaluation Kit for the MAX17671 5V Step-Down Converter and 3.3V Linear Regulator Output Voltage Application
    Evaluation Board10426MAX17672CEVKIT Evaluation Kit for the MAX17672 5V Buck Output Voltage and 1.8V Linear Regulator Output Voltage
    Evaluation Board10425MAX17670EEVKIT Evaluation Kit for the MAX17670 3.3V Step-Down Converter Output Voltage and 3.0V Linear Regulator Output Voltage Application