›

MAX17532

42V, 100mA, Ultra-Small, High-Efficiency, Synchronous Step-Down DC-DC Converter with 22µA No-Load Supply Current

42V, Low I_Q Synchronous Buck Regulator Enables High Efficiency

Data Sheet

Please check latest availability status for a specific part variant.

Overview

Description

The MAX17532 high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operates over a 4V to 42V input. The converter can deliver up to 100mA and generates output voltages from 0.8V up to 0.9 x V_IN. The feedback (FB) voltage is accurate to within ±1.75% over -40°C to +125°C.

The MAX17532 uses peak-current-mode control and can be operated in pulse-width modulation (PWM) or pulse-frequency modulation (PFM) modes.

The device is available in a 10-pin (3mm x 2mm) TDFN and 10-pin (3mm x 3mm) µMAX^® packages. Simulation models are available.

MAX17532: Block Diagram

Enlarge+

Key Features

Reduces External Components and Total Cost
- No Schottky–Synchronous
- Internal Compensation for Any Output Voltage
- Built-In Soft-Start
- All-Ceramic Capacitors, Compact Layout
Reduces Number of DC-DC Regulators to Stock
- Wide 4V to 42V Input
- Adjustable 0.8V to 0.9 x V_IN Output
- 100kHz to 2.2MHz Adjustable Switching Frequency with External Synchronization
Reduces Power Dissipation
- 22µA Quiescent Current
- Peak Efficiency > 90%
- PFM Enables Enhanced Light-Load Efficiency
- 1.2µA Shutdown Current
Operates Reliably in Adverse Environments
- Peak Current Limit Protection
- Built-In Output Voltage Monitoring Active-Low RESET
- Programmable EN/UVLO Threshold
- Monotonic Startup Into Prebiased Load
- Overtemperature Protection
- -High Industrial -40°C to +125°C Ambient Operating Temperature Range / -40°C to +150° C Junction Temperature Range

Parametric Specs

Part Number

V_IN
(V)

V_OUT1
(V)

Output Adjust. Method

I_OUT1
(A)

Switch Type

Synchronous Switching

Power Good Signal

DC-DC Outputs

Oper. Freq.
(kHz)

Design Tools

Package/Pins

Budgetary
Price

min

max

min

max

See Notes

MAX17532

0.8

Resistor

0.1

Internal

Yes

2200

EE-Sim

µMAX/10

TDFN/10

$1.00 @1k

See All Step-Down Switching Regulators (363)

Pricing Notes:

This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Design Resources

MAX17532ATBEVKIT: Evaluation Kit for MAX17532
MAX17532AUBEVKIT: Evaluation Kit for MAX17532

Technical Documents

User Guide 5861 EE-SIM Design and Simulation Environment User Guide

Quality and Environmental Data

Product Reliability Reports: MAX17532.pdf
Lead-Free Package Tin (Sn) Whisker Reports

Additional Resources

Topmark Coding MAX17532

Tools & Models

EE-Sim: Design & Simulate MAX17532

Quality And Environmental

Device	Fab Process	Technology	Sample size	Rejects	FIT at 25°C	FIT at 55°C

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

Order

Status:

Package:

Temperature:

Related Resources

New Products

MAX20049
Flexible Mini Dual 2.2MHz, 500mA Buck Converter with LDOs for Automotive Camera Supplies

Small Solution Size
EMI Solutions
Self-Protected and Robust

MAX17673
Integrated 4.5V to 60V Synchronous 1.5A HV Buck and Dual 2.7V to 5.5V, 1A Buck Regulators

Reduces External Components and Total Cost
Integrates Three DC-DC Regulators
Reduces Power Dissipation

MAX77813
High-Efficiency Buck-Boost Converter

V_IN Range: 2.30V to 5.5V
V_OUT Range: 2.60V to 5.14V
(I²C Programmable in 20mV Step)

MAX38640
Tiny 1.8V–5.5V Input, 330nA I_Q, 700mA nanoPower Buck Converter

Extends Battery Life
Easy to Use – Addresses Popular Operation
Protects System in Multiple Use Cases

MAX38641
Tiny 1.8V–5.5V Input, 330nA I_Q, 700mA nanoPower Buck Converter

Extends Battery Life
Easy to Use – Addresses Popular Operation
Protects System in Multiple Use Cases

MAX38642
Tiny 1.8V–5.5V Input, 330nA I_Q, 700mA nanoPower Buck Converter

Extends Battery Life
Easy to Use – Addresses Popular Operation
Protects System in Multiple Use Cases

MAX38643
Tiny 1.8V–5.5V Input, 330nA I_Q, 700mA nanoPower Buck Converter

Extends Battery Life
Easy to Use – Addresses Popular Operation
Protects System in Multiple Use Cases

MAX5995A
IEEE 802.3bt-Compliant, Powered Device Interface Controllers with Integrated 91W High-Power MOSFET

IEEE 802.3af/at/bt Compliant
Type 1~4 PSE Classification Indicator or an External Wall Adapter Indicator Output
Simplified Wall Adapter Interface

MAX5995B
IEEE 802.3bt-Compliant, Powered Device Interface Controllers with Integrated 91W High-Power MOSFET

IEEE 802.3af/at/bt Compliant
Type 1~4 PSE Classification Indicator or an External Wall Adapter Indicator Output
Simplified Wall Adapter Interface

MAX5995C
IEEE 802.3bt-Compliant, Powered Device Interface Controllers with Integrated 91W High-Power MOSFET

IEEE 802.3af/at/bt Compliant
Type 1~4 PSE Classification Indicator or an External Wall Adapter Indicator Output
Simplified Wall Adapter Interface

MAX38903C
1.7V—5.5VIN, 1A Low Noise LDO Linear Regulators in TDFN and WLP

1.7V to 5.5V Input Voltage Range
0.6V to 5.3V Programmable Output Voltage
7µV_RMS Output Noise, 10Hz to 100kHz

MAX38903D
1.7V—5.5VIN, 1A Low Noise LDO Linear Regulators in TDFN and WLP

1.7V to 5.5V Input Voltage Range
0.6V to 5.3V Programmable Output Voltage
7µV_RMS Output Noise, 10Hz to 100kHz

MAX38903A
1.7V—5.5VIN, 1A Low Noise LDO Linear Regulators in TDFN and WLP

1.7V to 5.5V Input Voltage Range
0.6V to 5.3V Programmable Output Voltage
7µV_RMS Output Noise, 10Hz to 100kHz

MAX38903B
1.7V—5.5VIN, 1A Low Noise LDO Linear Regulators in TDFN and WLP

1.7V to 5.5V Input Voltage Range
0.6V to 5.3V Programmable Output Voltage
7µV_RMS Output Noise, 10Hz to 100kHz

MAX20006
36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Step-Down Converters

Multiple Functions for Small Size
High Precision
Robust for the Automotive Environment

MAX20008
36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Step-Down Converters

Multiple Functions for Small Size
High Precision
Robust for the Automotive Environment

MAX20004
36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Step-Down Converters

Multiple Functions for Small Size
High Precision
Robust for the Automotive Environment

MAX20077EVKIT
Evaluation Kit for the MAX20077

3.5V to 36V Input Supply Range
5V or 3.3V Fixed Output Voltage, or Adjustable Between 1V and 10V
Delivers Up to 2.5A Output Current

MAX25277
36V, 2.5A Mini Buck Converter with 3.5uA I_Q

Synchronous DC-DC Converter with Integrated FETs
Small Solution Size Saves Space
PGOOD Output and High-Voltage EN Input Simplify Power Sequencing

MAX20077
36V, 2.5A Mini Buck Converter with 3.5uA I_Q

Synchronous DC-DC Converter with Integrated FETs
Small Solution Size Saves Space
PGOOD Output and High-Voltage EN Input Simplify Power Sequencing

MAX77503
14V Input, 1.5A High-Efficiency Buck Converter with 9μA I_Q

1.5A Single Channel Buck Regulator
3V to 14V Input Voltage Range
0.8V to 99%V_SUP Output Voltage Range

MAX17271
nanoPower Triple/Dual-Output, Single-Inductor, Multiple-Output (SIMO) Buck-Boost Regulator

3-Output/2-Output, Single-Inductor, Multiple-Output (SIMO) Buck-Boost Regulator
2.7V to 5.5V Input Voltage Range
Low-Power and Long Battery Life

MAX17270
nanoPower Triple/Dual-Output, Single-Inductor, Multiple-Output (SIMO) Buck-Boost Regulator

3-Output/2-Output, Single-Inductor, Multiple-Output (SIMO) Buck-Boost Regulator
2.7V to 5.5V Input Voltage Range
Low-Power and Long Battery Life

MAXM17900
4V to 24V, 100mA, Compact Step-Down Power Module

Easy to Use
High Efficiency
Flexible Design

MAXM17552
4V to 60V, 100mA, Compact Step-Down Power Module

Easy to Use
High Efficiency
Flexible Design

MAX38888
2.5V–5.0V, 0.5A/2.5A Reversible Buck/Boost Regulator for Backup Power Applications

2.5V to 5V System Output Voltage
0.8V to 4.5V Cap Voltage Range
Up to 2.5A Peak Inductor Discharge Current

MAX17250
2.7V to 18V Input, Boost Converter with 0.1uA True Shutdown, Short Circuit Protection and Selectable Input Current Limit

Input Voltage Range 2.7V to 18V
Output Voltage Range 3V to 18V, > V_IN
Integrated Power FETs

MAX17672
Integrated 4V-60V, 150mA, High-Efficiency, Synchronous Step-Down DC-DC Converter with 50mA Linear Regulator

Reduces External Components and Total Cost
Reduces Number of DC-DC Regulators to Stock
Reduces Power Dissipation

MAX17671
Integrated 4V-60V, 150mA, High-Efficiency, Synchronous Step-Down DC-DC Converter with 50mA Linear Regulator

Reduces External Components and Total Cost
Reduces Number of DC-DC Regulators to Stock
Reduces Power Dissipation

MAX17670
Integrated 4V-60V, 150mA, High-Efficiency, Synchronous Step-Down DC-DC Converter with 50mA Linear Regulator

Reduces External Components and Total Cost
Reduces Number of DC-DC Regulators to Stock
Reduces Power Dissipation

MAX20098
Versatile 36V 2.2MHz Buck Controller with 3.5µA I_Q

Meets Stringent OEM Module Power Consumption and Performance Specifications
Enables Crank-Ready Designs
EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input Voltage Range

MAX17633
4.5V to 36V, 3.5A, High-Efficiency, Synchronous Step-Down DC-DC Converter