Top

4.5V–60V, 5A, High-Efficiency, Synchronous Step-Down DC-DC Converter with Internal Compensation

Industry's First 60V, 5A Internal FET Synchronous Buck Converter

Product Details

Key Features

Parametric specs for Step-Down Switching Regulators
VIN (V) (min) 4.5
VIN (V) (max) 60
VOUT1 (V) (min) 0.9
VOUT1 (V) (max) 54
IOUT1 (A) (max) 5
Switch Type Internal
Output Adjust. Method Resistor
Synchronous Switching? Yes
Power Good Signal Yes
# DC-DC Outputs 1
Switching Frequency (kHz) 2200
Design Tools EE-Sim
Package/Pins TQFN-CU/20
Budgetary
Price (See Notes)
4.72
View Less

Simplified Block Diagram

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.

Parameters

Parametric specs for Step-Down Switching Regulators
VIN (V) (min) 4.5
VIN (V) (max) 60
VOUT1 (V) (min) 0.9
VOUT1 (V) (max) 54
IOUT1 (A) (max) 5
Switch Type Internal
Output Adjust. Method Resistor
Synchronous Switching? Yes
Power Good Signal Yes
# DC-DC Outputs 1
Switching Frequency (kHz) 2200
Design Tools generateDesignEESIMUrl('https://maxim.transim.com/pwm2/designreq/Index?partId=2810', '')
Package/Pins TQFN-CU/20
Budgetary
Price (See Notes)
4.72

Key Features

  • Reduces External Components and Total Cost
    • No Schottky-Synchronous Operation
    • Internal Compensation for Any Output Voltage
    • Built-In Soft-Start
    • All-Ceramic Capacitors, Compact Layout
  • Reduce Number of DC-DC Regulators to Stock
    • Wide 4.5V to 60V Input
    • Adjustable Output-Voltage Range from 0.9V up to 90% of VIN
    • 100kHz to 2.2MHz Adjustable Switching Frequency with External Synchronization
  • Reduces Power Dissipation
    • Peak Efficiency > 95%
    • PFM/DCM Modes Enables Enhanced Light-Load Efficiency
    • Auxiliary Bootstrap LDO for Improved Efficiency
    • 3.5µA Shutdown Current
  • Operates Reliably in Adverse Industrial Environments
    • Hiccup or Latchoff Mode Overload Protection
    • DL to LX Short Detection Feature
    • Built-In Output Voltage Monitoring with Active-Low RESET
    • Programmable EN/UVLO Threshold
    • Monotonic Startup into Prebiased Load
    • Overtemperature Protection
    • High Industrial -40°C to +125°C Ambient Operating Temperature / -40°C to +150°C Junction Temperature Range

Applications/Uses

  • Base Station Power Supplies
  • Distributed Supply Regulation
  • General-Purpose Point-of-Load
  • High-Voltage Single-Board Systems
  • Industrial Power Supplies
  • Wall Transformer Regulation

Description

The MAX17506 high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated high-side MOSFET operates over a 4.5V to 60V input. The converter can deliver up to 5A and generates output voltages from 0.9V up to 0.9 x VIN. The feedback (FB) voltage is accurate to within ±1.4% over -40°C to 125°C.

The MAX17506 uses peak current-mode control. The device can be operated in the pulse-width modulation (PWM), pulse-frequency modulation (PFM), and discontinuous conduction mode (DCM) control schemes.

The device is available in a 20-pin (5mm x 5mm) Thin QFN (TQFN) package. Simulation models are available.

Simplified Block Diagram

MAX17506: Typical Application Circuit for 5V Output MAX17506: Typical Application Circuit for 5V Output Zoom icon

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.