MAX17503EVKITBE

Evaluation Kit for the MAX17503 in 5V Output-Voltage Application


Please check latest availability status for a specific part variant.

Description

The MAX17503EVKITBE# evaluation kit (EV kit) provides a proven design to evaluate the MAX17503 high-voltage, high-efficiency, synchronous step-down DC-DC converter. The EV kit is preset for 5V output at load currents up to 2.5A and features a 500kHz switching frequency for optimum efficiency and component size. The EV kit features adjustable input undervoltage lockout, adjustable soft-start, open-drain active-low RESET signal, and external clock synchronization. The EV kit also provides a good layout example which is optimized for conducted, radiated EMI, and thermal performance. For more details about the IC benefits and features, refer to the MAX17503 IC data sheet.

Key Features

  • Operates from a 6.5V to 60V Input Supply
  • Programmed 5V Output Voltage, 2.5A Load Current
  • 500kHz Switching Frequency
  • Enable/UVLO Input, Resistor-Programmable UVLO Threshold
  • Adjustable Soft-Start Time
  • MODE Pin to Select Among PWM, PFM, or DCM Modes
  • Open-Drain Active-Low RESET Output
  • External Clock Synchronization
  • Overcurrent and Overtemperature Protection
  • Proven PCB Layout
  • Fully Assembled and Tested
  • Complies with CISPR22(EN55022) Class B Conducted and Radiated Emissions

Applications/Uses

  • Base Station Power Supplies
  • Distributed Supply Regulation
  • General-Purpose Point-of-Load
  • High-Voltage Single-Board Systems
  • Industrial Power Supplies
  • Wall Transformer Regulation

Tools & Models

  • MAX17503EVKITBE ODB File
  • Request Reliability Report for: MAX17503EVKITBE 
    Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX17783C
    4.5V to 60V, 2.5A, High Efficiency, Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX20028
    Step-Down Controller with Dual 2.1MHz Step-Down DC-DC Converters

    • High-Efficiency Voltage DC-DC Controller Saves Power
    • Dual 2.1MHz DC-DC Converters with Integrated FETs Saves Space
    • High Accuracy to Meet ASIL Specification

    MAX77533
    14V Input, 1.5A High-Efficiency Buck Converter with 9μA IQ

    • 1.5A Single Channel Buck Regulator
    • 3V to 14V Input Voltage Range
    • 0.8V to 99%VSUP Output Voltage Range

    MAX20766
    Smart Slave IC with Integrated Current and Temperature Sensors

    • Increased Power Density with Fewer External Components
    • Accurate Real-Time Telemetry of Critical Parameters
    • Advanced Self-Protection Features for the System and IC

    MAX20796
    Dual-Phase Scalable Integrated Voltage Regulator with PMBus Interface

    • Peak Efficiency 92%; Full-Load Efficiency 90% at VIN = 12V, VOUT = 1V
    • Operating Input Voltage Range 4.5V to 16V
    • Output Voltage Range is 0.5V to 5.5V

    MAX17227A
    400mV to 5.5V Input, 2A nanoPower Boost Converter with Short-Circuit Protection and True Shutdown

    • 350nA Quiescent Supply Current from Output
    • Output Short-Circuit Protection
    • True Shutdown Mode

    MAX20030
    Dual Buck, Sync Boost and LDO–Complete Front-End Power Supply with 17μA IQ

    • Meets Stringent OEM Module Power Consumption and Performance Specifications
    • Enables Crank-Ready Designs
    • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input Voltage Range

    MAX20031
    Dual Buck, Sync Boost and LDO–Complete Front-End Power Supply with 17μA IQ

    • Meets Stringent OEM Module Power Consumption and Performance Specifications
    • Enables Crank-Ready Designs
    • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input Voltage Range

    MAX20710
    Integrated, Step-Down Switching Regulator with PMBus

    • High Power Density and Low Component Count
    • Optimized Component Performance and Efficiency with Reduced Design-In Time
    • Increased Power-Supply Reliability with System and IC Self-Protection Features

    MAX17760
    4.5V to 76V, 300mA, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX20430
    Four-Output Mini PMIC for Safety Applications

    • Multiple Functions for Small Size
    • High-Precision for ASIL Applications
    • Diagnostics and Redundant Circuits

    MAX18066
    High-Efficiency, 4A, Step-Down DC-DC Regulator with Internal Power Switches

    • Feature Integration Shrinks Solution Size
    • High Efficiency Conserves Power
    • Safe, Reliable, Accurate Operation

    MAX18166
    High-Efficiency, 4A, Step-Down DC-DC Regulator with Internal Power Switches

    • Feature Integration Shrinks Solution Size
    • High Efficiency Conserves Power
    • Safe, Reliable, Accurate Operation

    MAX77511
    10V Input, Quad-Phase Configurable, 3A/Phase, High-Efficiency Buck Converter

    • 3A/Phase Configurable Buck Regulator
    • 2.3V to 10V Input Voltage Range
    • 0.25V to 5.2V Output Voltage Range

    MAX77711
    10V Input, Quad-Phase Configurable, 3A/Phase, High-Efficiency Buck Converter

    • 3A/Phase Configurable Buck Regulator
    • 2.3V to 10V Input Voltage Range
    • 0.25V to 5.2V Output Voltage Range

    MAX15158, MAX15158A
    High-Voltage Multiphase Boost Controller

    • Wide Operating Range
    • Integration Reduces Design Footprint
    • Robust Fault Protection Improves Quality and Reliability

    MAX15158A
    High-Voltage Multiphase Boost Controller

    • Wide Operating Range
    • Integration Reduces Design Footprint
    • Robust Fault Protection Improves Quality and Reliability