Top

Dual-Phase, Quick-PWM Controller for IMVP6+ CPU Core Power Supplies

Dual-Phase Intel IMVP6+ CPU Controllers for Montevina Platform

Product Details

Key Features

Simplified Block Diagram

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.

Key Features

  • Dual-/Single-Phase Interleaved Quick-PWM Controller
  • ±0.5% VOUT Accuracy Over Line, Load, and Temperature
  • 7-Bit IMVP6+ DAC
  • Dynamic Phase Selection Optimizes Active/Sleep Efficiency
  • Transient Phase Overlap Reduces Output Capacitance
  • Active Voltage Positioning with Adjustable Gain
  • Accurate Lossless Current Balance
  • Accurate Droop and Current Limit
  • Remote Output and Ground Sense
  • Adjustable Output Slew-Rate Control
  • Power-Good Window Comparator
  • Power Monitor
  • Programmable Thermal-Fault Protection
  • Phase Fault Output (PHASEGD)
  • Drives Large Synchronous Rectifier FETs
  • 4.5V to 26V Battery Input Range
  • Output Overvoltage and Undervoltage Protection
  • Soft-Startup and Soft-Shutdown
  • Integrated Boost Switches
  • Low-Profile 7mm x 7mm, 48-Pin TQFN Package

Applications/Uses

  • IMVP6+ Core Supply
  • Multiphase CPU Core Supply
  • Notebook/Desktop Computers
  • Voltage-Positioned, Step-Down Converters

Description

The MAX17410 is a 2-/1-phase interleaved Quick-PWM™ step-down VID power-supply controller for notebook IMVP6+ CPUs. True out-of-phase operation reduces input ripple current requirements and output voltage ripple while easing component selection and layout difficulties. The Quick-PWM control scheme provides instantaneous response to fast load current steps. Active voltage positioning reduces power dissipation and bulk output capacitance requirements and allows ideal positioning compensation for tantalum, polymer, or ceramic bulk output capacitors.

The MAX17410 is intended for two different CPU core applications: either bucking down the battery directly to create the core voltage, or bucking down the +5V system supply. The single-stage conversion method allows this device to directly step down high-voltage batteries for the highest possible efficiency. Alternatively, 2-stage conversion (stepping down the +5V system supply instead of the battery) at higher switching frequency provides the minimum possible physical size.

A slew-rate controller allows controlled transitions between VID codes. A thermistor-based temperature sensor provides programmable thermal protection. A power monitor provides a buffered analog voltage output proportional to the power delivered to the load.

The MAX17410 is available in a 48-pin, 7mm x 7mm TQFN package.

Simplified Block Diagram

MAX17410: Functional Diagram MAX17410: Functional Diagram Zoom icon

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.