Top

AMD 2-/3-Output Mobile Serial VID Controller

Single Power-Management Solution for AMD's Serial VID Interface (SVI) CPU and Northbridge (NB) Core Supplies

Product Details

Key Features

Simplified Block Diagram

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.

Key Features

  • Dual-Output Fixed-Frequency Core Supply Controller
    • Split or Combinable Outputs Detected at Power-Up
    • Dynamic Phase Selection Optimizes Active/Sleep Efficiency
    • Transient Phase Repeat Reduces Output Capacitance
    • True Out-of-Phase Operation Reduces Input Capacitance
    • Programmable AC and DC Droop
    • Accurate Current Balance and Current Limit
    • Integrated Drivers for Large Synchronous-Rectifier MOSFETs
    • Programmable 100kHz to 600kHz Switching Frequency
    • 4V to 26V Battery Input-Voltage Range
  • 3A Internal Switch Northbridge SMPS
    • 2.7V to 5.5V Input Voltage Range
    • 2x Programmable Switching Frequency
    • 100mΩ/50mΩ Power Switches
  • ±0.5% VOUT Accuracy over Line, Load, and Temperature
  • AMD SVI-Compliant Serial Interface with Switchable Address
  • 7-Bit On-Board DAC: 0 to +1.550V Output Adjust Range
  • Integrated Boost Switches
  • Adjustable Slew-Rate Control
  • Power-Good (PWRGD) and Thermal-Fault (Active-Low VRHOT) Outputs
  • System Power-OK (PGD_IN) Input
  • Overvoltage, Undervoltage, and Thermal-Fault Protection
  • Voltage Soft-Startup and Passive Shutdown
  • < 1µA Typical Shutdown Current

Applications/Uses

  • Mobile AMD SVI Core Supplies
  • Multiphase CPU Core Supplies
  • Notebook/Desktop Computers
  • Voltage-Positioned, Step-Down Converters

Description

The MAX17080 is a triple-output, step-down, fixed-frequency controller for AMD's serial VID interface (SVI) CPU and northbridge (NB) core supplies. The MAX17080 consists of two high-current SMPSs for the CPU cores and one 3A internal switch SMPS for the NB core. The two CPU core SMPSs run 180° out-of-phase for true interleaved operation, minimizing input capacitance. The 3A internal switch SMPS runs at twice the switching frequency of the core SMPS, reducing the size of the external components.

The MAX17080 is fully AMD SVI compliant. Output voltages are dynamically changed through a 2-wire SVI, allowing the SMPSs to be individually programmed to different voltages. A slew-rate controller allows controlled transitions between VID codes and controlled soft-start. SVI also allows each SMPS to be individually set into a low-power pulse-skipping state.

Transient phase repeat improves the response of the fixed-frequency architecture, reducing the total output capacitance for the CPU core. A thermistor-based temperature sensor provides a programmable thermal-fault output (active-low VRHOT).

The MAX17080 includes output overvoltage protection (OVP), undervoltage protection (UVP), and thermal protection. When any of these protection features detect a fault, the controller shuts down. True differential current sensing improves current limit and load-line accuracy. The MAX17080 has an adjustable switching frequency, allowing 100kHz to 600kHz operation per core SMPS, and twice that for the NB SMPS.

Simplified Block Diagram

MAX17080: Pin Configuration MAX17080: Pin Configuration Zoom icon

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.