MAX1672EVKIT

Evaluation Kit for the MAX1672


Please check latest availability status for a specific part variant.

Description

The MAX1672 evaluation kit (EV kit) integrates a step-up switching converter with a linear-regulator output to provide step-up/down voltage conversion. It accepts a 1.8V to 11V input and converts it to a 3.3V or 5V output for currents up to 300mA. The EV kit is optimized for battery applications where the input varies above and below the regulated output voltage. It provides ultra-low quiescent current and high efficiency for maximum battery life. Another benefit of the low-dropout linear post-regulator is that it reduces high-frequency ripple.

The MAX1672 EV kit is a fully assembled and tested surface-mount circuit board. With minimal modification, it can also be used to evaluate other output voltages. Additional pads on the board accommodate external feedback resistors for setting different output voltages.

Key Features

  • Step-Up/Down Voltage Conversion
  • 1.8V to 11V Input Range
  • 3.3V or 5V Selectable Output Voltage
  • Adjustable Output Voltage (1.25V to 5.5V)
  • Load Disconnects from Input in Shutdown
  • Up to 300mA Output Current
  • No External FETs Required
  • 0.1µA Typical IC Shutdown Current
  • Low-Battery Comparator
  • 16-Pin QSOP Package (same footprint as 8-pin SO)
  • Surface-Mount Components
  • Fully Assembled and Tested

Applications/Uses

  • 2-Cell to 4-Cell AA Alkaline Handheld Equipment
  • 3.3V and Other Low-Voltage Systems
  • Battery-Powered Devices with AC Input Adapters
  • Digital Still Cameras
  • Single-Cell, Lithium-Powered Portable Devices

Quality and Environmental Data

Lead-Free Package Tin (Sn) Whisker Reports
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX77501
110VPK-PK High-Efficiency Piezo Haptic Actuator Boost Driver

  • 110VPK-PK Haptic Waveforms Generation
  • Optimized for up to 2µF Haptic Piezo Actuator
  • 2.8V to 5.5V Input Supply Range

MAX20457
36V Dual 3.5A/2A Synchronous Buck Converters for Automotive Applications

  • Meets Stringent OEM Module Power Consumption and Performance Specifications
  • Enables Crank-Ready Designs
  • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input-Voltage Range

MAXM17536
4.5V to 60V, 4A High-Efficiency, DC-DC Step-Down SiP Power Module with Integrated Inductor

  • Reduces Design Complexity, Manufacturing Risks, and Time-to-Market
  • Saves Board Space in Space-Constrained Applications
  • Offers Flexibility for Power-Design Optimization

MAX17576
4.5V to 60V, 4A, High-Efficiency, Synchronous Step-Down DC-DC Converter with Internal Compensation

  • Reduces External Components and Total Cost
  • Reduces Number of DC-DC Regulators to Stock
  • Reduces Power Dissipation

MAX20412
Automotive Low-Voltage 2-Channel Step-Down Controller

  • 2-Channel, High-Efficiency DC-DC Controller in a Small Solution Size
  • High-Precision Regulator for Applications Processors
  • Low-Noise Features Reduce EMI

MAX20343
Ultra-Low Quiescent Current, Low Noise 3.5W Buck-Boost Regulator

  • Extend System Run Time
  • Low, Continuous Noise Profile
  • Adaptable Load Transient Response

MAX20004E
36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

  • Multiple Functions for Small Size
  • High Precision
  • Robust for the Automotive Environment

MAX20006E
36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

  • Multiple Functions for Small Size
  • High Precision
  • Robust for the Automotive Environment

MAX20008E
36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

  • Multiple Functions for Small Size
  • High Precision
  • Robust for the Automotive Environment

MAX17630
4.5V to 36V, 1A, High-Efficiency, Synchronous Step-Down DC-DC Converter

  • Reduces External Components and Total Cost
  • Reduces Number of DC-DC Regulators to Stock
  • Reduces Power Dissipation

MAX20011
Automotive Single 8A/12A Step-Down Converter with High Efficiency

  • High-Efficiency DC-DC Converter
  • Up to 12A peak output current:
  • Differential Remote Voltage Sensing

MAX15158Z
High-Voltage Multiphase Boost Controller

  • Wide Operating Range
  • Integration Reduces Design Footprint
  • Robust Fault Protection Improves Quality and Reliability

MAX20079
Automotive 36V 3.5A Buck Converter with 3.5μA IQ

  • Synchronous DC-DC Converter with Integrated FETs
  • Small Solution Size Saves Space
  • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing

MAX20026, MAX20026S
Automotive Quad, Low-Voltage Step-Down DC-DC Converters with Low-Noise LDO

  • High-Integration Shrinks Solution Size
  • Performance Designed for Automotive Point-of-Load Regulation
  • Low-Noise Features Improve EMI Performance

MAX20026S
Automotive Quad, Low-Voltage Step-Down DC-DC Converters with Low-Noise LDO

  • High-Integration Shrinks Solution Size
  • Performance Designed for Automotive Point-of-Load Regulation
  • Low-Noise Features Improve EMI Performance

MAX20801
MPP Tracking DC-DC Converter

  • Performs MPPT on 20-24 Series Connected PV Cells
  • Fast MPPT Reacts Quickly to Changing Conditions
  • Integrated Voltage-Limiting Clamps Output Voltage

MAX20800
MPP Tracking DC-DC Converter

  • Performs MPPT on 20-24 Series Connected PV Cells
  • Fast MPPT Reacts Quickly to Changing Conditions
  • Integrated Voltage-Limiting Clamps Output Voltage

MAX20059
72V, 1A, Automotive Synchronous Step-Down DC-DC Converter

  • Synchronous DC-DC Converters with Integrated FETs
  • Flexibility
  • Active-Low RESET Output and EN Input (26V max) Simplify Power Sequencing

MAX20058
60V, 1A, Automotive Synchronous Step-Down DC-DC Converter

  • Synchronous DC-DC Converters with Integrated FETs
  • Flexibility
  • Active-Low RESET Output and EN Input (26V max) Simplify Power Sequencing

MAXM15065
4.5V to 60V, 300mA Step-Down uSLIC Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAXM15067
4.5V to 60V, 300mA Step-Down uSLIC Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAXM15066
4.5V to 60V, 300mA Step-Down uSLIC Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAXM17904
4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAXM17905
4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAXM17906
4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAX20010C
Automotive Single 6A Step-Down Converters

  • Fully Integrated, Synchronous 6A DC-DC Converter Enables Small Solution Size
  • High-Precision Voltage Regulator for Applications Processors
  • Low-Noise Feature Reduces EMI

MAX20010D
Automotive Single 6A Step-Down Converters

  • Fully Integrated, Synchronous 6A DC-DC Converter Enables Small Solution Size
  • High-Precision Voltage Regulator for Applications Processors
  • Low-Noise Feature Reduces EMI

MAX20048
Automotive 40V, 55µA IQ, 2.2MHz, H-Bridge Buck-Boost Controller

  • Meets Stringent Automotive Quality and Reliability Requirements
  • Efficient Solution in a Small Solutions Size
  • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements

MAX20039
Automotive, 2V to 36V, 2.2MHz, 0.6A/1.2A Buck-Boost Converters with Integrated H-Bridge Architecture

  • Meets Stringent Automotive Quality and Reliability Requirements
  • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements (B and D version only)
  • High Switching Frequency Allows Use of Small External Components

MAX20040
Automotive, 2V to 36V, 2.2MHz, 0.6A/1.2A Buck-Boost Converters with Integrated H-Bridge Architecture

  • Meets Stringent Automotive Quality and Reliability Requirements
  • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements (B and D version only)
  • High Switching Frequency Allows Use of Small External Components

MAX20029B
Automotive Quad/Triple/Quad Low-Voltage Step-Down DC-DC Converters

  • Quad Step-Down DC-DC Converters with Integrated FETs
  • Operate from 3.0V to 5.5V Supply Voltage
  • 1.0V to 4.0V Fixed or Adjustable Output Voltage

MAX20029, MAX20029B, MAX20029C
Automotive Quad/Triple/Quad Low-Voltage Step-Down DC-DC Converters

  • Quad Step-Down DC-DC Converters with Integrated FETs
  • Operate from 3.0V to 5.5V Supply Voltage
  • 1.0V to 4.0V Fixed or Adjustable Output Voltage

MAX20029C
Automotive Quad/Triple/Quad Low-Voltage Step-Down DC-DC Converters

  • Quad Step-Down DC-DC Converters with Integrated FETs
  • Operate from 3.0V to 5.5V Supply Voltage
  • 1.0V to 4.0V Fixed or Adjustable Output Voltage

MAX77827
5.5V Input, 1.8A/3.1A Switch Buck-Boost Converter with 6μA IQ

  • 1.8V to 5.5V Input Voltage Range
  • 2.3V to 5.3V Single Resistor Adjustable Output Voltage
  • 1.6A Maximum Output Current (3.1A ILIM Option, Buck Mode)