MAX15301AA02

InTune Automatically Compensated Digital PoL Controller with Driver and PMBus Telemetry

Only Digital Power IC To Meet Transient and Light-Load Efficiency Performance Metrics Set by Analog Controllers


Please check latest availability status for a specific part variant.

Description

The MAX15301AA02 is a full-featured, highly efficient, digital point-of-load (PoL) controller with advanced power management and telemetry features. Unlike PID-based digital power regulators, the MAX15301AA02 uses Maxim’s patented InTune automatically compensated, state-space control algorithm. The InTune control law is valid for both the small- and large-signal response and accounts for duty-cycle saturation effects. These capabilities result in fast loop transient response and reduce the number of output capacitors compared to competing digital controllers.

The MAX15301AA02 includes multiple features to optimize efficiency. An internal switch BabyBuck regulator generates the gate drive and the internal bias supplies for the controller with low power loss. An advanced, high-efficiency MOSFET gate driver has adjustable nonoverlap timing and load-variable gate-drive voltage to minimize switching losses over the full range of voltage, current, and temperature.

The MAX15301AA02 was designed for end-customer’s design environment. An on-board PMBus-compliant serial bus interface enables communication with a supervisory controller for monitoring and fault management. A full suite of power management features eliminates the need for complicated and expensive sequencing and monitoring ICs. Basic DC-DC conversion operation can be set up via pin strapping and does not require user configuration firmware. This allows for rapid development of the power-supply subsystem before board-level systems engineering is completed. Maxim provides support hardware and software for configuring the IC.

The MAX15301AA02 is available in a 32-lead, 5mm x 5mm TQFN package and operates over the -40°C to +85°C temperature range.
MAX15301AA02: Typical Operating Circuit MAX15301AA02: Typical Operating Circuit Enlarge+

Key Features

  • InTune Automatic Compensation Ensures Stability While Optimizing Transient Performance
  • State-Space Compensation Results in Fast Transient Response with Reduced Output Capacitance
  • Differential Remote Voltage Sensing Enables ±1% VOUT Accuracy over Temperature (-40°C to +85°C)
  • PMBus Interface for Configuration, Control, and Monitoring
  • Supports Voltage Positioning
  • High Output 2A/4A MOSFET Driver
    • Adjustable Nonoverlap Timing
    • Variable Gate-Drive Voltage
  • Wide Input Range of 4.5V to 14V
  • Efficient On-Chip BabyBuck Regulator for Self-Bias
  • Output Voltage Range from 0.5V to 5.25V
  • Startup into a Prebiased Output
  • Configurable Soft-Start and Soft-Stop Time
  • Fixed-Frequency Operation and Synchronization Flexible Sequencing and Fault Management
  • Pin-Strappable Configuration
    • Output Voltage, SMBus Address, Switching Frequency, Current Limit
  • Out-of-the-Box Operation Enables Fast Prototyping

Applications/Uses

  • Base-Station Equipment
  • Power Modules
  • Routers/Switches
  • Servers
  • Storage Systems
Part NumberVIN
(V)
VIN
(V)
VOUT1
(V)
VOUT1
(V)
Preset VOUT
(V)
Output Adjust. MethodIOUT1
(A)
Switch TypeSynchronous SwitchingPower Good SignalDC-DC OutputsOper. Freq.
(kHz)
Package/PinsBudgetary
Price
minmaxminmaxSee Notes
MAX15301AA02 4.5140.55.25
0.7
0.8
0.85
0.9
0.95
0.6
0.75
1
1.05
1.1
1.2
1.5
1.8
2.5
3.3
5
Digital/VID
Resistor
40ExternalYesYes11000
TQFN/32
$3.54 @1k
See All Step-Down Switching Regulators (363)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX15301EVKITHP: Evaluation Kit for the MAX15301AA02

Technical Documents

User Guide 5981 PowerTool MAXPOWERTOOL002# Quick Start Guide
User Guide 5793 MAX15301 PMBus Command Set User’s Guide
App Note 5601 Current Calibration Procedure for InTune Digital Power
App Note 5349 Digital Power Solution Optimizes Base-Station Operation
Tutorial 5133 Power-Supply Solutions for Altera FPGAs
Tutorial 5132 Power-Supply Solutions for Xilinx FPGAs

Quality and Environmental Data

Request Reliability Report for: MAX15301AA02 
Lead-Free Package Tin (Sn) Whisker Reports

Additional Resources

The EV kit requires the use of the MAXPOWERTOOL002# which is not included and must be purchased separately.

Tools & Models

  • MAX15301AA02 Gerber File
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX20049
    Flexible, Compact Quad Power Supply with 2.2MHz, 500mA Buck Converters and Dual LDOs for Automotive Camera Modules

    • Small Solution Size
    • EMI Solutions
    • Self-Protected and Robust

    MAX17673
    Integrated 4.5V to 60V Synchronous 1.5A HV Buck and Dual 2.7V to 5.5V, 1A Buck Regulators

    • Reduces External Components and Total Cost
    • Integrates Three DC-DC Regulators
    • Reduces Power Dissipation

    MAX77813
    High-Efficiency Buck-Boost Converter

    • VIN Range: 2.30V to 5.5V
    • VOUT Range: 2.60V to 5.14V (I2C Programmable in 20mV Step)
    • Up to 2A Output Current in Boost Mode (VIN = 3.0V, VOUT = 3.4V, ILIM = High)

    MAX38643
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38641
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38642
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX38640A
    Tiny 1.8V–5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

    • Extends Battery Life
    • Easy to Use – Addresses Popular Operation
    • Protects System in Multiple Use Cases

    MAX5995A
    IEEE 802.3bt-Compliant, Powered Device Interface Controllers with Integrated 91W High-Power MOSFET

    • IEEE 802.3af/at/bt Compliant
    • Type 1~4 PSE Classification Indicator or an External Wall Adapter Indicator Output
    • Simplified Wall Adapter Interface

    MAX5995B
    IEEE 802.3bt-Compliant, Powered Device Interface Controllers with Integrated 91W High-Power MOSFET

    • IEEE 802.3af/at/bt Compliant
    • Type 1~4 PSE Classification Indicator or an External Wall Adapter Indicator Output
    • Simplified Wall Adapter Interface

    MAX5995C
    IEEE 802.3bt-Compliant, Powered Device Interface Controllers with Integrated 91W High-Power MOSFET

    • IEEE 802.3af/at/bt Compliant
    • Type 1~4 PSE Classification Indicator or an External Wall Adapter Indicator Output
    • Simplified Wall Adapter Interface

    MAX38903A
    1.7V–5.5VIN, 1A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX38903B
    1.7V–5.5VIN, 1A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX38903C
    1.7V–5.5VIN, 1A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX38903D
    1.7V–5.5VIN, 1A Low Noise LDO Linear Regulators in TDFN and WLP

    • Delivers Flexible Operating Range
    • Reduces Noise and Improves Accuracy
    • Enables Ease-of-Use and Robust Protection

    MAX20004
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20008
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20006
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20077
    36V, 2.5A Mini Buck Converter with 3.5uA IQ

    • Synchronous DC-DC Converter with Integrated FETs
    • Small Solution Size Saves Space
    • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing

    MAX25277
    36V, 2.5A Mini Buck Converter with 3.5uA IQ

    • Synchronous DC-DC Converter with Integrated FETs
    • Small Solution Size Saves Space
    • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing

    MAX77503
    14V Input, 1.5A High-Efficiency Buck Converter with 9μA IQ

    • 1.5A Single Channel Buck Regulator
    • 3V to 14V Input Voltage Range
    • 0.8V to 99%VSUP Output Voltage Range

    MAX17270
    nanoPower Triple/Dual-Output, Single-Inductor, Multiple-Output (SIMO) Buck-Boost Regulator

    • 3-Output/2-Output, Single-Inductor, Multiple-Output (SIMO) Buck-Boost Regulator
    • 2.7V to 5.5V Input Voltage Range
    • Low-Power and Long Battery Life

    MAX17271
    nanoPower Triple/Dual-Output, Single-Inductor, Multiple-Output (SIMO) Buck-Boost Regulator

    • 3-Output/2-Output, Single-Inductor, Multiple-Output (SIMO) Buck-Boost Regulator
    • 2.7V to 5.5V Input Voltage Range
    • Low-Power and Long Battery Life

    MAXM17900
    4V to 24V, 100mA, Compact Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17552
    4V to 60V, 100mA, Compact Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAX38888
    2.5V–5.0V, 0.5A/2.5A Reversible Buck/Boost Regulator for Backup Power Applications

    • 2.5V to 5V System Output Voltage
    • 0.8V to 4.5V Cap Voltage Range
    • Up to 2.5A Peak Inductor Discharge Current

    MAX17250
    2.7V to 18V Input, Boost Converter with 0.1uA True Shutdown, Short Circuit Protection and Selectable Input Current Limit

    • Input Voltage Range 2.7V to 18V
    • Output Voltage Range 3V to 18V, > VIN
    • Integrated Power FETs