Evaluation Kit for the MAX63XX Supervisory Circuits

Please check latest availability status for a specific part variant.


Maxim's line of supervisory circuits offers multiple wafer trimmable options, leading to thousands of variations. The large number of variations makes it difficult to offer samples for each unique version. The Supervisory Circuit Evaluation Kit (SUPEVKIT) has been developed to emulate all the different variations of the MAX63XX line. It reproduces the logic of this line but not the electrical characteristics. Any device in these product families can be emulated simply by changing jumper settings and using a capacitor, if required.

The SUPEVKIT supports the following MAX63XX devices:

MAX6305 MAX6315 MAX6322HP
MAX6306 MAX6316L MAX6326
MAX6307 MAX6316M MAX6327
MAX6308 MAX6317H MAX6328
MAX6309 MAX6318LH MAX6332*
MAX6312 MAX6319MH MAX6335*
MAX6313 MAX6320P MAX6336*
MAX6314 MAX6321HP MAX6337*
MAX6310 MAX6318MH MAX6333*
MAX6311 MAX6319LH MAX6334*

Key Features

  • Easy to Configure
  • Five Reset Outputs
    • Bidirectional ative-low RESET
    • Open-Drain active-low RESET
    • Push/Pull active-low RESET
    • Push/Pull active-low RESET
    • Open-Drain active-low RESET
  • Adjustable Reset Timeout
  • Manual Reset Input
  • Adjustable Under/Overvoltage Supply Monitoring
  • Adjustable Watchdog Timeout
  • Reset Valid Down to VCC = 1V
  • Immune to Short Negative-Going VCC Transients
  • Assembled and Tested
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >


Related Resources