Micropower, Latching Voltage Monitors in SOT23-5

Industry's Only SOT Voltage Monitors With Latched Output

Please check latest availability status for a specific part variant.


The MAX834/MAX835 micropower voltage monitors contain a 1.204V precision bandgap reference, comparator, and latched output in a 5-pin SOT23 package. Using the latched output prevents deep discharge of batteries. The MAX834 has an open-drain, n-channel output driver, while the MAX835 has a push-pull output driver. Two external resistors set the trip-threshold voltage.

The MAX834/MAX835 feature a level-sensitive latch, eliminating the need to add hysteresis to prevent oscillations in battery-load-disconnect applications.
MAX834, MAX835: Typical Operating Circuit MAX834, MAX835: Typical Operating Circuit Enlarge+

Key Features

  • Prevent Deep Discharge of Batteries
  • Precision ±1.25% Voltage Threshold
  • Latched Output (Once Low, Stays Low Until Cleared)
  • SOT23-5 Package
  • Low Cost
  • +2.5V to +11V Wide Operating Voltage Range
  • < 2µA Typical Supply Current
  • Open-Drain Output (MAX834)/Push-Pull Output (MAX835)


  • Battery-Powered Applications
  • Load Switching
  • Precision Battery Monitoring
  • Threshold Detectors

See parametric specs for Supervisors (1 Monitored Voltage) (252)

Part NumberReset Thresh.
Reset OuttRESETWatchdog FeatureSupervisor FeaturesReset Thresh. Accur.
min@ +25°CmaxSee Notes
1.2 to 1.8
1.8 to 2.5
2.5 to 3.3
3.3 to 5.5
Active Low
Open Drain
<1msNo Watchdog
Adjustable Reset Input
High Voltage (>6V)
Latched Output
$2.14 @1k
Active Low
$2.09 @1k

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
Product Reliability Reports: MAX834.pdf 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >


Related Resources