MAX6433

Low-Power, Single/Dual-Level Battery Monitors with Hysteresis

Low-Power, Single/Dual Level Battery Monitor with Internal Hysteresis Requires No External Components. Ideal for Single Cell Lithium or Multi-Cell Alkaline, NiMH, and NiCd Applications


Please check latest availability status for a specific part variant.

Description

The MAX6427-MAX6438 are single/dual-level battery monitors with internal hysteresis. These devices are offered with single (MAX6427/MAX6428/MAX6429, MAX6433/MAX6434/MAX6435) or dual (MAX6430/MAX6431/MAX6432, MAX6436/MAX6437/MAX6438) low-battery output indicators, which can be used to indicate three battery conditions: battery is good (operate system in normal mode), battery is weak (operate system in low-power mode), or battery is empty (disable the system).

These devices are ideal for monitoring single lithium-ion (Li+) cells or multicell alkaline/NiCd/NiMH power supplies. When the power-supply voltage drops below the specified low threshold, the low-battery output asserts. When the voltage rises above the specified high threshold, the low-battery output is deasserted following a 140ms minimum timeout period. The timeout period ensures that the supply voltages have stabilized before power-converter or microprocessor activity is enabled.

The MAX6427-MAX6438 family is available with several monitoring options. The MAX6427/MAX6428/MAX6429 offer factory-trimmed battery-monitor thresholds, with a single low-battery output. The MAX6430/MAX6431/MAX6432 also feature factory-trimmed thresholds, but have two low-battery outputs. The MAX6433-MAX6438 have user-adjustable threshold voltages permitting the user to select the hysteresis range, and consequently the sensitivity of the system to noise. A wide hysteresis range also prevents chattering that can result due to battery recovery after load removal. Single low-battery outputs are supplied by the MAX6433/MAX6434/MAX6435 and dual low-battery outputs by the MAX6436/MAX6437/MAX6438.

The MAX6427-MAX6438 family is available with three output logic options for convenient interface with system power circuitry or microprocessors. The family is offered in small SOT23 and SOT143 packages and is fully specified over temperature.
MAX6427, MAX6428, MAX6429, MAX6430, MAX6431, MAX6432, MAX6433, MAX6434, MAX6435, MAX6436, MAX6437, MAX6438: Typical Operating Circuit MAX6427, MAX6428, MAX6429, MAX6430, MAX6431, MAX6432, MAX6433, MAX6434, MAX6435, MAX6436, MAX6437, MAX6438: Typical Operating Circuit Enlarge+

Key Features

  • Factory-Trimmed or User-Adjustable Threshold Options
    • Factory-Trimmed Low Thresholds from 1.6V to 2.1V or 2.6V to 3.1V in 100mV Increments (MAX6427-MAX6432)
    • Factory-Trimmed High Thresholds from 2.3V to 2.6V or 3.3V to 3.6V in 100mV Increments (MAX6427-MAX6432)
    • User-Adjustable Low/High Thresholds with 615mV Internal Reference (MAX6433-MAX6438)
  • Low Current (1µA, typ)
  • Single or Dual Low-Battery Outputs
  • Push-Pull active-low LBO, Open-Drain active-low LBO, and Open-Drain LBO Options
  • 140ms Minimum LBO Timeout Period
  • Immune to Short Battery Voltage Transients
  • Guaranteed Valid LBO Logic State to BATT = 1.0V
  • -40°C to +85°C Operating Temperature Range
  • Small 3, 4, 5 and 6-Pin SOT Packages
  • No External Components Required (MAX6427-MAX6432)

Applications/Uses

  • Battery-Powered Systems (Single-Cell Li+ or Multicell NiMH, NiCd, Alkaline)
  • Cell Phones/Cordless Phones
  • Electronic Toys
  • MP3 Players
  • Pagers
  • PDAs
  • Portable Medical Devices
Part NumberReset Thresh.
(V)
Reset OuttRESETWatchdog FeatureSupervisor FeaturesReset Thresh. Accur.
(%)
ICC
(µA)
Package/PinsBudgetary
Price
min@ +25°CmaxSee Notes
MAX6427 
1.2 to 1.8
1.8 to 2.5
2.5 to 3.3
3.3 to 5.5
Active Low
Push-Pull
85ms to 300msNo WatchdogPower Fail Comparator/Low Battery Detect2.51.5
SOT23/3
$1.49 @1k
MAX6428 
1.2 to 1.8
1.8 to 2.5
2.5 to 3.3
3.3 to 5.5
Active Low
Open Drain
SOT23/3
-
MAX6433 
0 to 1.2
1.2 to 1.8
1.8 to 2.5
2.5 to 3.3
3.3 to 5.5
Active Low
Push-Pull
SOT23/5
$1.78 @1k
MAX6434 
0 to 1.2
1.2 to 1.8
1.8 to 2.5
2.5 to 3.3
3.3 to 5.5
Active Low
Open Drain
SOT23/5
$1.78 @1k
See All Supervisors (1 Monitored Voltage) (256)

Part NumberInterfaceReset Thresh.
(V)
Reset OuttRESETWatchdog FeatureSupervisor FeaturesReset Thresh. Accur.
(%)
ICC
(µA)
Package/PinsBudgetary
Price
min@ +25°CmaxSee Notes
MAX6430 Factory Fixed
1.2 to 1.8
1.8 to 2.5
2.5 to 3.3
3.3 to 5.5
Active Low
Push-Pull
85ms to 300msNo WatchdogPower Fail Comparator/Low Battery Detect2.51.5
SOT23/4
$1.78 @1k
MAX6436 R/C Adjustable
0 to 1.2
1.2 to 1.8
1.8 to 2.5
2.5 to 3.3
3.3 to 5.5
Active Low
Push-Pull
SOT23/6
$1.49 @1k
MAX6437 R/C Adjustable
0 to 1.2
1.2 to 1.8
1.8 to 2.5
2.5 to 3.3
3.3 to 5.5
Active Low
Open Drain
SOT23/6
$1.78 @1k
See All Supervisors (2 Monitored Voltages) (73)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Quality and Environmental Data

Request Reliability Report for: MAX6433 
Lead-Free Package Tin (Sn) Whisker Reports
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX16136
High-Precision Supervisory with Window Watchdog and Overvoltage Indicator

  • ±1% Accuracy
  • Enables ASIL Compliance at System Level
  • 0.5V to 5V Threshold Range with 20mV Increments

MAX16160
High-Accuracy 4-Channel, Any-Input Supervisory Circuits

  • Valid Active-Low RESET Logic State for Any Input Above 1V
  • ±1% Accuracy for All Inputs
  • Low 17μA Supply Current