MAX16144
nanoPower, Tiny Supervisor with Manual Reset Input
Nanopower, Tiny Supervisory with Manual Reset Input
MyMaxim SubscriptionsProduct Details
Key Features
Applications/Uses
Simplified Block Diagram
Technical Docs
| Data Sheet | nanoPower, Tiny Supervisor with Manual Reset Input | Jan 09, 2020 |
High-Frequency Noise Rejection in Voltage Supervisory ICs
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.
Key Features
- 370nA Quiescent Current, Extends Battery Life
- Edge/Level Trigger MR Input
- Factory-Set Reset Timeout Period
- MR Debounce Circuitry
- Factory-Set Threshold: 1.7V to 4.85V
- WLP and SOT23 Packages
- -40°C to +125°C Temperature Range
Applications/Uses
- Chargers
- e-Readers/Tablets
- Portable/Battery-Powered Equipment
- Smart Phones
- Wearable/Portable Accessories
Description
The MAX16140, MAX16142, MAX16144, MAX16146, MAX16156, MAX1615, MAX16158, MAX16159 are ultra-low-current, single-channel supervisory ICs that monitor the VCC voltage from 1.7V to 4.85V in approximately 50mV increments and asserts a reset when VCC voltage falls below the reset threshold. The reset output remains asserted for the reset timeout period after the VCC voltage rises above the factory-set VCC_TH + VHYS. See the Selector Guide for available reset timeout options.
The MAX16140, MAX16142, MAX16144, MAX16146, MAX16156, MAX16157, MAX16158, MAX16159 include a factory-programmable manual reset input (MR) that can be configured to assert a reset when it receives a rising-edge, falling-edge, active-low, or active-high input signal. The MAX16140/MAX16144/MAX16156/MAX16157 feature an open-drain reset output, while the MAX16142/MAX16146/MAX16158/MAX16159 feature a push-pull reset output. See the Selector Guide for reset output configurations.
All devices are specified over the -40°C to +125°C temperature range. The MAX16140/MAX16142/MAX16156/MAX16158 available in a tiny 0.73mm x 0.73mm x 0.5mm, 4-bump WLP. The MAX16144/MAX16146/MAX16157/MAX16159 are available in 5-pin SOT23 package.
Technical Docs
| Data Sheet | nanoPower, Tiny Supervisor with Manual Reset Input | Jan 09, 2020 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.
Request a Quote