MAX16125

Dual Pushbutton Controllers in Tiny 6-Bump WLP Package

New Pushbutton Controllers Offer Hardware Solutions to Eliminate the Need to Program a µC


Please check latest availability status for a specific part variant.

Description

The MAX16122–MAX16125 pushbutton controllers with single-supply monitors monitor one or two pushbuttons and generate a hard reset signal if the buttons are pushed and held for a setup delay. The devices make it easy to "hide" the hard reset function in an existing pushbutton, such as a soft power switch. These devices operate from 1.6V to 5.5V and consume a quiescent current of only 5µA at 3V.

The MAX16122–MAX16125 have pin programmable or resistor-adjustable setup delay. Connect the SEL pin to GND, VCC, or leave it unconnected to select the different setup delays (depending on part suffix, see Table 1a in the full data sheet) or connect an external resistor from SEL to GND to set the setup delays (E suffix only, see Table 1b in the full data sheet).

The MAX16124/MAX16125 have one manual reset input (active-low MR), a reset output (active-low RESET), and a soft reset output (active-low SRESET) which mirrors the state of the input. The MAX16122/MAX16123 have two identical manual reset inputs (active-low MR1 and active-low MR2) and one reset output (active-low RESET). A deglitch block is connected to each input to add a delay to the falling edge with a fixed deglitch period of 20ms (tDB).

The devices feature a comparator that monitors the input supply voltage. A variety of factory-trimmed threshold options accommodate different supply voltages and tolerances, eliminating external components. The factory-set reset thresholds range from 1.58V to 4.63V to monitor 5V, 3.3V, 2.5V, and 1.8V supplies.

The MAX16122–MAX16125 are offered in a tiny 0.86mm x 1.25mm, 6-bump WLP package and are specified over the automotive temperature range (-40°C to +125°C).
MAX16122, MAX16123, MAX16124, MAX16125: Functional Diagram MAX16122, MAX16123, MAX16124, MAX16125: Functional Diagram Enlarge+

Key Features

  • Low Supply Current: < 5µA (typ) at 3V Over Temperature
  • Precision Factory-Set VCC Monitoring Threshold for 1.8V, 2.5V, 3.3V, and 5V Supplies
  • Fixed/Pin Programmable or Resistor-Adjustable Pushbutton Setup Delay
  • Up to 2 Reset Outputs and 2 Debounced Pushbutton Inputs
  • Guaranteed Active-Low RESET Valid for VCC Down to 0.95V
  • Active-Low RESET Output (Push-Pull or Open-Drain)
  • Immune to Short Power-Supply Transients
  • 0.86mm x 1.25mm 6-Bump WLP Package
  • -40°C to +125°C Operating Temperature Range

Applications/Uses

  • Ebook Readers
  • Glucose Monitors/Patient Monitors
  • Portable Instrumentation
  • Portable/Battery-Powered Equipment
  • Smartphones
  • Tablet PCs
Part NumberReset Thresh.
(V)
Reset OuttRESETWatchdog FeatureSupervisor FeaturesReset Thresh. Accur.
(%)
ICC
(µA)
Package/PinsBudgetary
Price
min@ +25°CmaxSee Notes
MAX16125 
1.2 to 1.8
1.8 to 2.5
2.5 to 3.3
3.3 to 5.5
Active Low
Open Drain
1ms to 15ms
15ms to 85ms
85ms to 300ms
250ms to 450ms
300ms to 1s
>1s
Adjustable
No WatchdogManual Reset2.510
WLP/6
$0.94 @1k
See All Supervisors (1 Monitored Voltage) (261)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX16136
High-Precision Supervisory with Window Watchdog and Overvoltage Indicator

  • ±1% Accuracy
  • Enables ASIL Compliance at System Level
  • 0.5V to 5V Threshold Range with 20mV Increments

MAX16160
High-Accuracy 4-Channel, Any-Input Supervisory Circuits

  • Valid Active-Low RESET Logic State for Any Input Above 1V
  • ±1% Accuracy for All Inputs
  • Low 17μA Supply Current

MAX16152
nanoPower Supervisor and Watchdog Timer

  • 400nA (typ) Supply Current
  • 1.2V to 5.5V Operating Supply Range
  • Monitors Supply Voltage and Provides System Reset Signal

MAX16153
nanoPower Supervisor and Watchdog Timer

  • 400nA (typ) Supply Current
  • 1.2V to 5.5V Operating Supply Range
  • Monitors Supply Voltage and Provides System Reset Signal

MAX16154
nanoPower Supervisor and Watchdog Timer

  • 400nA (typ) Supply Current
  • 1.2V to 5.5V Operating Supply Range
  • Monitors Supply Voltage and Provides System Reset Signal

MAX16155
nanoPower Supervisor and Watchdog Timer

  • 400nA (typ) Supply Current
  • 1.2V to 5.5V Operating Supply Range
  • Monitors Supply Voltage and Provides System Reset Signal

MAX20480
Automotive ASIL-D 7-Channel Power-System Monitor

  • Small Solution
  • High Precision
  • Highly Integrated