MAX16073

nanoPower µP Supervisory Circuits in a 4-Bump (1mm x 1mm) Chip-Scale Package

µP Supervisors Offered in a Space-Saving, 1mm x 1mm Package and Consume Very Little Power


Please check latest availability status for a specific part variant.

Description

The MAX16072/MAX16073/MAX16074 ultra-small, ultra-low-power, microprocessor (µP) supervisory circuits feature a precision band-gap reference, comparator, and internally trimmed resistors that set the threshold voltage. Designed to monitor the system supply voltage and assert an output during power-up, power-down, and brownout conditions, these devices provide excellent circuit reliability and low cost by eliminating external components and adjustments when monitoring nominal system voltage from 1.8V to 3.6V.

The MAX16072 has a push-pull, active-low reset output, the MAX16073 has a push-pull, active-high reset output, and the MAX16074 has an open-drain active-low reset output. The devices are designed to ignore fast transients on VCC. The devices also include a manual reset input (active-low MR).

The MAX16072/MAX16073/MAX16074 are available in a 1mm x 1mm, space-saving, 4-bump, chip-scale package (UCSP™).
MAX16072, MAX16073, MAX16074: Typical Operating Circuit MAX16072, MAX16073, MAX16074: Typical Operating Circuit Enlarge+

Key Features

  • Ultra-Low, 0.7µA Supply Current
  • Ultra-Small (1mm x 1mm), 4-Bump UCSP
  • 20µs, 8ms, 34ms, and 140ms Reset Timeout Options Available
  • Factory-Trimmed Reset Thresholds Available from 1.58V to 3.08V in Approximately 100mV Increments
  • ±2.5% Threshold Accuracy Over Temperature
  • Manual Reset Input
  • Guaranteed Reset Valid to VCC = 1.0V
  • Immune to Short VCC Transient

Applications/Uses

  • Cell Phones
  • Digital Cameras
  • MP3 Players
  • PDAs
  • Portable/Battery-Powered Equipment
Part NumberReset Thresh.
(V)
Reset OuttRESETWatchdog FeatureSupervisor FeaturesReset Thresh. Accur.
(%)
ICC
(µA)
Package/PinsBudgetary
Price
min@ +25°CmaxSee Notes
MAX16072 
1.2 to 1.8
1.8 to 2.5
2.5 to 3.3
Active Low
Push-Pull
1ms to 15ms
15ms to 85ms
85ms to 300ms
<1ms
No WatchdogManual Reset2.51.5
UCSP (R)/4
$1.55 @1k
MAX16073 
Active High
Push-Pull
UCSP (R)/4
-
MAX16074 
Active Low
Open Drain
UCSP (R)/4
$0.86 @1
See All Supervisors (1 Monitored Voltage) (258)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Quality and Environmental Data

Request Reliability Report for: MAX16073 
Lead-Free Package Tin (Sn) Whisker Reports

Additional Resources


Powering Through Faults on the Smart Grid


Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX16136
High-Precision Supervisory with Window Watchdog and Overvoltage Indicator

  • ±1% Accuracy
  • Enables ASIL Compliance at System Level
  • 0.5V to 5V Threshold Range with 20mV Increments

MAX16160
High-Accuracy 4-Channel, Any-Input Supervisory Circuits

  • Valid Active-Low RESET Logic State for Any Input Above 1V
  • ±1% Accuracy for All Inputs
  • Low 17μA Supply Current

MAX16154
nanoPower Supervisor and Watchdog Timer

  • 400nA (typ) Supply Current
  • 1.2V to 5.5V Operating Supply Range
  • Monitors Supply Voltage and Provides System Reset Signal

MAX16153
nanoPower Supervisor and Watchdog Timer

  • 400nA (typ) Supply Current
  • 1.2V to 5.5V Operating Supply Range
  • Monitors Supply Voltage and Provides System Reset Signal

MAX16155
nanoPower Supervisor and Watchdog Timer

  • 400nA (typ) Supply Current
  • 1.2V to 5.5V Operating Supply Range
  • Monitors Supply Voltage and Provides System Reset Signal

MAX16152
nanoPower Supervisor and Watchdog Timer

  • 400nA (typ) Supply Current
  • 1.2V to 5.5V Operating Supply Range
  • Monitors Supply Voltage and Provides System Reset Signal