On/Off Controller with Debounce and ±15kV ESD Protection

Industry's Smallest Pushbutton On/Off Controller

Please check latest availability status for a specific part variant.


The MAX16054 is a pushbutton on/off controller with a single switch debouncer and built-in latch. It accepts a noisy input from a mechanical switch and produces a clean latched digital output after a factory-fixed qualification delay.

The MAX16054 eliminates contact bounce during switch opening and closing. The state of the output changes only when triggered by the falling edge of the debounced switch input; the output remains unchanged on the rising edge of the input. Robust switch inputs handle ±25V levels and are ±15kV ESD protected for use in harsh industrial environments. The MAX16054 features a complementary output, active-low OUT, which is the inverted state of OUT. An asynchronous CLEAR input allows an external signal to force the output flip-flop low. Undervoltage-lockout circuitry ensures that OUT is in the off state upon power-up. The MAX16054 requires no external components, and its low supply current makes it ideal for use in portable equipment.

The MAX16054 operates from a +2.7V to +5.5V single supply. The MAX16054 is offered in a 6-pin thin SOT23 package and operates over the -40°C to +125°C automotive temperature range.
MAX16054: Typical Operating Circuit MAX16054: Typical Operating Circuit Enlarge+

Key Features

  • Robust Inputs Can Handle Power Supplies Up to ±25V
  • ±15kV ESD Protection
  • Latched Output
  • Low 7µA Supply Current
  • Operates from 2.7V to 5.5V
  • -40°C to +125°C Temperature Range
  • Thin SOT23 Package


  • MP3/Video Players
  • PDAs
  • Portable Electronics
  • Portable Instrumentation
  • Set-Top Boxes
  • White Goods

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
Product Reliability Reports: MAX16054.pdf 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >


Related Resources