Product Details
Key Features
Applications/Uses
Reset Thresh. (V) | 0 to 1.2 1.2 to 1.8 1.8 to 2.5 2.5 to 3.3 3.3 to 5.5 |
Reset Thresh. Accur. (%) (@ +25°C) | 2.5 |
Reset Out | Active Low Open Drain With Internal Pull-Up |
Interface | Factory Fixed R/C Adjustable |
tRESET (min) | 1ms to 15ms 15ms to 85ms 85ms to 300ms 300ms to 1s <1ms >1s Adjustable |
Watchdog Feature | Input (WDI) |
Supervisor Features | Adjustable Reset Input Manual Reset |
ICC (µA) (max) | 70 |
Package/Pins | TQFN/12 |
Budgetary Price (See Notes) | 3.64 |
Simplified Block Diagram
Technical Docs
Data Sheet | Low-Voltage, Quad-/Hex-/Octal-Voltage µP Supervisors | Jan 03, 2019 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.
Parameters
Reset Thresh. (V) | 0 to 1.2 1.2 to 1.8 1.8 to 2.5 2.5 to 3.3 3.3 to 5.5 |
Reset Thresh. Accur. (%) (@ +25°C) | 2.5 |
Reset Out | Active Low Open Drain With Internal Pull-Up |
Interface | Factory Fixed R/C Adjustable |
tRESET (min) | 1ms to 15ms 15ms to 85ms 85ms to 300ms 300ms to 1s <1ms >1s Adjustable |
Watchdog Feature | Input (WDI) |
Supervisor Features | Adjustable Reset Input Manual Reset |
ICC (µA) (max) | 70 |
Package/Pins | TQFN/12 |
Budgetary Price (See Notes) | 3.64 |
Key Features
- Fixed Thresholds for 5V, 3.3V, 3V, 2.5V, 1.8V, 1.5V, 1.2V, and 0.9V Systems
- Adjustable Thresholds Monitor Voltages Down to 0.4V
- Open-Drain Outputs with Internal Pullups Reduce the Number of External Components
- Fixed 140ms (min) or Capacitor-Adjustable Reset Timeout
- Manual Reset, Margin Enable, and Tolerance Select Inputs
- Watchdog Timer
- 1.6s (typ) Timeout Period
- 54s Startup Delay After Reset (Except MAX16005)
- Independent Watchdog Output (MAX16005)
- Active-Low RESET Output Indicates All Voltages Present
- Independent Voltage Monitors
- Guaranteed Correct Logic State Down to VCC = 1V
- Small (4mm x 4mm) TQFN Package
- TSSOP (5mm x 4.4mm) Package (MAX16005)
- AEC-Q100 Qualified (MAX16001ATE/V+ and MAX16001DTE/V+ Only)
Applications/Uses
- Multivoltage ASICs
- Networking/Telecommunication Equipment
- Servers
- Storage Equipment
Description
The MAX16000/MAX16001/MAX16003/MAX16004/MAX16006 offer independent outputs for each monitored voltage. The MAX16001/MAX16002/MAX16004–MAX16007 offer a reset output that asserts whenever any of the monitored voltages fall below their respective thresholds or the manual reset input is asserted. The reset output remains asserted for the reset timeout after all voltages are above their respective thresholds and the manual reset input is deasserted. The minimum reset timeout is internally set to 140ms or can be adjusted with an external capacitor.
All open-drain outputs have internal 30µA pullups that eliminate the need for external pullup resistors. However, each output can be driven with an external voltage up to 5.5V. Other features offered include a manual reset input, a tolerance pin for selecting 5% or 10% input thresholds, and a margin enable function for deasserting the outputs during margin testing.
The MAX16001/MAX16002/MAX16004–MAX16007 offer a watchdog timer that asserts active-low RESET or an independent watchdog output (MAX16005) when the watchdog timeout period (1.6s typ) is exceeded. The watchdog timer can be disabled by leaving the input open.
These devices are offered in 12-, 16-, 20-, and 24-lead TQFN and 16-lead TSSOP packages. These are fully specified from -40°C to +125°C.
Technical Docs
Data Sheet | Low-Voltage, Quad-/Hex-/Octal-Voltage µP Supervisors | Jan 03, 2019 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.