DS1233

5V EconoReset


Please check latest availability status for a specific part variant.

Description

The DS1233 EconoReset monitors two vital conditions for a microprocessor: power supply and external override. A precision temperature-compensated reference and comparator circuit are used to monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an internal power-fail signal is generated which forces reset to the active state. When VCC returns to an in-tolerance condition, the reset signal is kept in the active state for approximately 350ms to allow the power supply and processor to stabilize. The second function of the DS1233 is pushbutton reset control. The DS1233 debounces a pushbutton closure and will generate a 350ms reset pulse upon release.

DS1233: Block Diagram DS1233: Block Diagram Enlarge+

Key Features

  • Automatically restarts microprocessor after power failure
  • Monitors pushbutton for external override
  • Internal circuitry debounces pushbutton switch
  • Maintains reset for 350ms after VCC returns to an in-tolerance condition or pushbutton released
  • Accurate 5%, 10%, or 15% microprocessor 5V power supply monitoring
  • Reduces need for discrete components
  • Precision temperature-compensated voltage reference and voltage sensor
  • Low-cost TO-92 package or surface-mount SOT-223 package
  • Internal 5kΩpull-up resistor
  • Operating temperature of -40°C to +85°C

See parametric specs for Supervisors (1 Monitored Voltage) (252)


Part NumberReset Thresh.
(V)
Reset OuttRESETWatchdog FeatureSupervisor FeaturesReset Thresh. Accur.
(%)
ICC
(µA)
Package/PinsBudgetary
Price
min@ +25°CmaxSee Notes
DS1233 3.3 to 5.5
Active Low
Open Drain
With Internal Pull-Up
250ms to 450msNo WatchdogManual Reset2.550
ST223/3
TO92/3
$0.67 @1k

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
Product Reliability Reports: DS1233.pdf 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources