MAX20333G

Adjustable Current-Limit Switch with Low Power Mode

Extended 0perating Range Up to 22V with Adjustable Current-Limit Modes Provides a Highly Versatile Solution


Please check latest availability status for a specific part variant.

Description

The MAX20333/A/B/C/D/E/F/G/H/I/J/K programmable current-limit switches feature internal current limiting to prevent damage to host devices due to faulty load conditions. These current limit switches feature a low 23mΩ (typ) on-resistance and operate from a +3.5V to +22V input voltage range.

The MAX20333 family has three working modes: normal mode (NM), high current mode (HCM), and low power mode (LPM). In NM, the device offers a programmable current-limit protection from 0.2A to 4.75A. The current-limit threshold can be programmed by connecting a suitable resistor to the SETI bump. When the current reaches the programmed threshold, the part prevents the current to further increase. The device can react in three different ways while in current limit: autoretry, latchoff, and continuous. The voltage on the SETI bump is proportional to the current flowing out of the OUT bump at any time and can be read by an ADC.

In high current mode (HCM), the current-limit threshold is multiplied by two, with an internal upper limit set at 5.5A. The voltage on SETI is proportional to the current flowing into IN, but multiplied by a factor 0.5. In low power mode (LPM), the current consumption of the part is dramatically reduced, and the on-resistance is 420mΩ (typ), while still offering an overcurrent protection. The switch is open when the current flowing through the switch exceeds 0.4A (typ).

The devices are available in a 15-bump (2.1mm x 1.52mm) WLP package and operate over the -40°C to +85°C extended temperature range.
MAX20333, MAX20333A: Typical Application Circuit MAX20333, MAX20333A: Typical Application Circuit Enlarge+

Key Features

  • Flexible Operation
    • Wide Range of Programmable Current Limit (0.2A to 5A)
    • Wide Operating Range: 3.5V to 22V
    • Three Different Current-Limit Modes: NM, HCM, LPM
    • Three Different Current-Limit Behaviors: Autoretry, Latchoff, Continuous
    • Power Good Input
    • Current Monitoring
  • Safe Operation
    • Precision Current Limit
    • Output Short Protection
    • Thermal Protection
    • Flag Output
  • Power Savings
    • Low Power Mode (LPM) with Output Short Protection

Applications/Uses

  • Battery Disconnect Switch
  • General Power Supply Switch
  • USB Port Protection Switch

MAX20333EVKIT: Evaluation Kit for the MAX20333, MAX2033A, MAX20333B, MAX20333C, MAX20333D, MAX20333E, MAX20333F, MAX20333G, MAX20333H, MAX20333I, MAX20333J, MAX20333K

Quality and Environmental Data

Request Reliability Report for: MAX20333G 
Lead-Free Package Tin (Sn) Whisker Reports
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX20333A
Adjustable Current-Limit Switch with Low Power Mode

  • Flexible Operation
  • Safe Operation
  • Power Savings

MAX20333
Adjustable Current-Limit Switch with Low Power Mode

  • Flexible Operation
  • Safe Operation
  • Power Savings

MAX20333C
Adjustable Current-Limit Switch with Low Power Mode

  • Flexible Operation
  • Safe Operation
  • Power Savings

MAX20333D
Adjustable Current-Limit Switch with Low Power Mode

  • Flexible Operation
  • Safe Operation
  • Power Savings

MAX20333B
Adjustable Current-Limit Switch with Low Power Mode

  • Flexible Operation
  • Safe Operation
  • Power Savings

MAX20333E
Adjustable Current-Limit Switch with Low Power Mode

  • Flexible Operation
  • Safe Operation
  • Power Savings

MAX20333F
Adjustable Current-Limit Switch with Low Power Mode

  • Flexible Operation
  • Safe Operation
  • Power Savings

MAX20333G
Adjustable Current-Limit Switch with Low Power Mode

  • Flexible Operation
  • Safe Operation
  • Power Savings

MAX20333H
Adjustable Current-Limit Switch with Low Power Mode

  • Flexible Operation
  • Safe Operation
  • Power Savings

MAX20333K
Adjustable Current-Limit Switch with Low Power Mode

  • Flexible Operation
  • Safe Operation
  • Power Savings

MAX20333I
Adjustable Current-Limit Switch with Low Power Mode

  • Flexible Operation
  • Safe Operation
  • Power Savings

MAX20333J
Adjustable Current-Limit Switch with Low Power Mode

  • Flexible Operation
  • Safe Operation
  • Power Savings

MAX20334
OverVoltage and Surge-Protected Dual SPDT Data Line Switch

  • Distortion-Free, High-Speed Signaling
  • Flexible System Design
  • Robust and Safety

MAX17613A
4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

  • Robust Protection Reduces System Downtime
  • Flexible Design Options Enable Reuse and Less Requalification
  • Saves Board Space and Reduces External BOM Count

MAX17613B
4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

  • Robust Protection Reduces System Downtime
  • Flexible Design Options Enable Reuse and Less Requalification
  • Saves Board Space and Reduces External BOM Count

MAX17613C
4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

  • Robust Protection Reduces System Downtime
  • Flexible Design Options Enable Reuse and Less Requalification
  • Saves Board Space and Reduces External BOM Count