MAX20084

Automotive Dual-Antenna Power Supply with I2C Serial Interface

Dual Antenna Phantom Supply Provides Diagnostics for Multiband Antenna Systems programmable via I2C


Please check latest availability status for a specific part variant.

Description

The MAX20084 is a dual-antenna power supply with I2C interface for diagnostics and control. The dual 270mA antenna supplies are linear regulators whose output voltage is set individually through I2C. Additionally, internal registers are used to set current limit, open-load threshold, and other parameters.

An internal 8-bit ADC allows the channel current to be measured. The AOUT analog output can also be used with an external ADC to measure the output current on either channel.

The MAX20084 is available in two variants: the MAX20084ATEA/VY+ with both channels turned off by default after power-up, and the MAX20084ATEB/VY+ with channel 1 turned on by default after power-up.

The MAX20084 is available in a 4mm x 4mm side-wettable TQFN package and operates over the -40 to +125°C temperature range.

Key Features

  • Wide Input Voltage Range: 4.5V to 28V (40V Load Dump Tolerant)
  • High Integration
    • Complete 2-Channel Solution with Linear Regulators and Diagnostics
    • I2C Control for Minimum Parts Count
  • Complete and Flexible Control
    • Regulator Output Voltage
    • Regulator Current Limit
    • Regulator Overcurrent Level
    • Individual Disable/Enable
  • Detailed Diagnostics
    • Output Current
    • Short-to-Ground/Battery
    • Overtemperature Warning
    • Thermal Shutdown
  • Compact, 4mm x 4mm, TQFN 16 Side-Wettable Package

Applications/Uses

  • Automotive Camera and Sensor Power
  • Automotive Microphone Power
  • Remote LNA Phantom Power
Part NumberPower SwitchesCurrent Limit
(mA)
Current Limit
(mA)
Fault IndicatorCurrent Limit Accuracy
(%)
Current Limit Set ByRON
(Ω)
VSUPPLY
(V)
VSUPPLY
(V)
Oper. Temp.
(°C)
Package/Pins
minmaxtypminmax
MAX20084 250300Yes5
Pin Select
Preset
1.654.528-40 to +125
TQFN-CU/16
See All Current Limit and USB Power Switches (83)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX20084EVKIT: Evaluation Kit for the MAX20084

Quality and Environmental Data

Request Reliability Report for: MAX20084 
Lead-Free Package Tin (Sn) Whisker Reports
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX20334
OverVoltage and Surge-Protected Dual SPDT Data Line Switch

  • Distortion-Free, High-Speed Signaling
  • Flexible System Design
  • Robust and Safety

MAX17613B
4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

  • Robust Protection Reduces System Downtime
  • Flexible Design Options Enable Reuse and Less Requalification
  • Saves Board Space and Reduces External BOM Count

MAX17613C
4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

  • Robust Protection Reduces System Downtime
  • Flexible Design Options Enable Reuse and Less Requalification
  • Saves Board Space and Reduces External BOM Count

MAX17613A
4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

  • Robust Protection Reduces System Downtime
  • Flexible Design Options Enable Reuse and Less Requalification
  • Saves Board Space and Reduces External BOM Count