MAX17526B

5.5V to 60V, 6A Current-Limiter with OV, UV, Reverse Protection, and Power Limit

Industry's First Protection solution with Adjustable Power Limit


Please check latest availability status for a specific part variant.

Description

The Olympus series of ICs are the industry's smallest and robust integrated system protection solutions. The MAX17526A adjustable power limiter offers a unique feature to limit power drawn from supplies or delivered to loads, amongst a host of protection features. These protection features include adjustable input overvoltage and undervoltage protection, positive and negative input voltage protection, overcurrent protection, reverse-current protection and overtemperature protection. The device features a built-in low RON (30mΩ typ) NFET, and an integrated gate drive for an optional external NFET.

The device highlights a power limit feature that allows programmed reduction in current limit, as an inverse function of an external voltage. Input or output power limit is achieved by limiting the current through the device as a function of input or output voltages.

Input undervoltage protection level is adjustable between 5.5V and 24V, and input overvoltage protection level is adjustable between 6V and 40V. The input undervoltage lockout (UVLO) threshold and overvoltage lockout (OVLO) threshold are adjusted using external resistors. The device offers a factory preset internal UVLO and OVLO thresholds at 12.4V (typ) and 36.2V (typ) respectively. The factory preset levels can be invoked by connecting the UVLO and/or the OVLO pins to GND.

The device features programmable current limit protection up to 6A. Current limit threshold is programmed by connecting a resistor from the SETI pin to GND. When the device current reaches the programmed threshold, the controller inside the device prevents further increase in current by modulating the internal NFET resistance. The device offers three different behavioral modes under current limited operation: Continuous mode, Autoretry mode, and Latch-off mode. The continuous current limit feature offers control of inrush current at startup while charging high capacitances at the output side. Two additional part options that feature a dual-stage current-limit mode, in which the current is continuously limited to 1.5x (MAX17526B) and 2.0x (MAX17526C), the programmed limits, are available upon request. The power limit feature is disabled in the MAX17526B/C part options. The voltage appearing on the SETI pin is proportional to the instantaneous current flowing through the device, and can be read by the supervisory system.

MAX17526A also offers reverse-current protection and input reverse voltage polarity protection when deployed with an external NFET, and built-in overtemperature protection. It is available in a 20-pin 5mm x 5mm TQFN-EP package. The device operates over -40°C to +125°C extended temperature range.

MAX17526A, MAX17526B, MAX17526C: Typical Operating Circuit MAX17526A, MAX17526B, MAX17526C: Typical Operating Circuit Enlarge+

Key Features

  • Robust Protection Reduces System Downtime
    • Wide Input-Supply Range: +5.5V to +60V
    • Active Power Limit to Protect Supply or Load (MAX17526A)
    • Programmable Input Overvoltage Setting up to 40V
    • Negative Input Fault Tolerant (with External NFET)
    • Reverse Current Protection (with External NFET)
    • Low RON Internal NFET (30mΩ typ)
  • Dual-Stage Current Limiting
    • 1.0x Startup Current (MAX17526A)
    • 1.5x Startup Current (MAX17526B)
    • 2.0x Startup Current (MAX17526C)
  • Fast Startup and Brownout Recovery
    • Continuous Current-Limit During Startup
    • Thermal Foldback Current-Limit
  • Flexible Design to Maximize Reuse and Minimize Requalification
    • Adjustable UVLO and OVLO Thresholds
    • ±8.5% Accurate Programmable Current Limit from 0.6A to 6.0A Over Full Temperature Range
    • Programmable Overcurrent Response: Continuous, Autoretry, and Latch-Off Modes
    • Logic Level and High-Voltage Enable Inputs (EN and Active-Low HVEN)
    • Protected External NFET Gate Drive
  • Reduced Solution Footprint
    • 20-Pin 5mm x 5mm TQFN-EP Package
    • Integrated NFET for Common-Use Protection Requirements

Applications/Uses

  • Control and Automation
  • Human Machine Interfaces
  • Industrial Power Distribution Systems
  • Motion Control Drives
Part NumberChannelsVIN
(V)
VIN
(V)
Internal Pwr. MOSFETsRON
(mΩ)
Current Limit
(A)
Current Limit
(A)
Current Limit Accuracy
(%)
Fault ResponseReverse Current Protect.Fault IndicatorOper. Temp.
(°C)
Package/PinsBudgetary
Price
minmaxtypminmaxSee Notes
MAX17526A 15.560NMOS300.668.5ContinuousYesYes-40 to +125
TQFN-CU/20
$2.32 @1k
See All Overvoltage/Overcurrent Protectors with Internal MOSFETs (23)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX17526AEVKIT: Evaluation Kit for the MAX17526A - 5.5V to 60V, 6A Current Limiter with OV, UV, Reverse Protection, and Power Limit

Quality and Environmental Data

Request Reliability Report for: MAX17526B 
Lead-Free Package Tin (Sn) Whisker Reports

CAD Symbols and Footprints

  • MAX17526BATP+
  • MAX17526BATP+T
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX20334
    OverVoltage and Surge-Protected Dual SPDT Data Line Switch

    • Distortion-Free, High-Speed Signaling
    • Flexible System Design
    • Robust and Safety

    MAX17613B
    4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

    • Robust Protection Reduces System Downtime
    • Flexible Design Options Enable Reuse and Less Requalification
    • Saves Board Space and Reduces External BOM Count

    MAX17613C
    4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

    • Robust Protection Reduces System Downtime
    • Flexible Design Options Enable Reuse and Less Requalification
    • Saves Board Space and Reduces External BOM Count

    MAX17613A
    4.5V to 60V, 3A Current-Limiter with OV, UV, and Reverse Protection

    • Robust Protection Reduces System Downtime
    • Flexible Design Options Enable Reuse and Less Requalification
    • Saves Board Space and Reduces External BOM Count

    Type ID Title
    Evaluation Board9949MAX17526AEVKIT Evaluation Kit for the MAX17526A - 5.5V to 60V, 6A Current Limiter with OV, UV, Reverse Protection, and Power Limit