MAX16970

3A Automotive Hi-Speed USB Protectors with Apple iPhone/iPad and USB 2.0 Charge Detection

Industry's Lowest USB Power FET Resistance with Compliance to BC1.2 and Apple iPhone/iPad Charging Specifications


Please check latest availability status for a specific part variant.

Description

The MAX16970/MAX16971 provide high-ESD and short-circuit protection for the low-voltage internal USB data and USB power line in automotive radio, navigation, connectivity, and USB hub applications. The devices support both Hi-Speed USB (480Mbps) and full-speed USB (12Mbps) operation. In addition, the devices also include integrated circuitry to enable fast-charging for consumer devices adhering to either the Apple method or the Hi-Speed USB host-charger port-detection protocol and support USB On-The-Go (OTG).

The short-circuit protection features include short-to-battery on the protected HVBUS, HVD+, and HVD- outputs, as well as short-to-HVBUS on the protected HVD+ and HVD- outputs. The devices are capable of a short-to-battery condition of up to +18V. Short-to-GND and overcurrent protection are also provided on the HVBUS output to protect the internal BUS power rail from overcurrent faults.

Each device features high-ESD protection to ±15kV Air Gap method and ±8kV Contact method on all protected HVBUS, HVD+, and HVD- outputs.

Each device features two low 4.0Ω on-resistance Hi-Speed USB switches, a current-limited low-voltage 31mΩ BUS switch, and provides an integrated high-voltage external power-switch controller. The BUS switch can start up into large capacitive noncompliant USB loads. The devices also feature an enable input, a fault output, integrated Apple iPhone®/iPad® fast-charging termination resistors, and an integrated host-charger port-detection circuit adhering to the USB 2.0 battery charging specification version 1.2.

The devices are available in 16-pin QSOP and 16-pin (4mm × 4mm) TQFN packages and operate over the -40°C to +105°C temperature range. The MAX16970GEEA/V+ and MAX16971GEEA/V+ are drop-in compatible with MAX16969DGEE/V+ and MAX16969BGEE/V+, respectively. 
MAX16970, MAX16971: Typical Operating Circuit MAX16970, MAX16971: Typical Operating Circuit Enlarge+

Key Features

  • Minimized Voltage Drop on Bus Line Due to Industry- Leading RDS(ON) Helps Meet USB Voltage Specifications at Device Connector
    • Current-Limited 31mΩ (typ) BUS Switch with High- Capacitive Load Capability
  • Robust Overvoltage and ESD Protection for Automotive Environment Saves on External Protection Components
    • Short-to-Battery and Short-to-GND Protection on Protected HVBUS Output
    • Short-to-Battery and Short-to-HVBUS Protection on Protected HVD+ and HVD- Outputs
    • Two 4.0Ω (typ) RON USB 2.0 Data Switches
    • Integrated Overcurrent and Short-Circuit Autoretry
    • High ESD Protection (HVD+, HVD-, HVBUS)
      • ± 15kV Human Body Model
      • ± 15kV IEC 61000-4-2 Air Gap
      • ± 8kV IEC 61000-4-2 Contact
    • 20ms Fault-Blanking Timeout Period
  • Automatic Transitioning of Charge Modes Through Intelligent State Machine for Seamless Device Integration
    • Integrated Apple iPhone 1.0A Dedicated Charging Mode
    • Integrated Apple iPad 2.1A Dedicated Charging Mode
    • USB-IF BC1.2 Charging Downstream Port (CDP) and Dedicated Charging Port (DCP) Modes
    • Chinese Telecommunication Industry-Standard YD/T 1591-209
    • USB On-The-Go (OTG) Support
  • Drop-In Pin Compatibility with MAX16919/MAX16969 in 16-Pin QSOP Package
  • AEC-Q100 Qualified

Applications/Uses

  • Automotive Connectivity
  • Automotive Radio and Navigation
  • Telematics
  • USB Hub

See parametric specs for Current Limit and USB Power Switches (80)


Part NumberUSBPower SwitchesCurrent Limit
(mA)
Current Limit
(mA)
Fault IndicatorCurrent Limit Accuracy
(%)
Current Limit Set ByRON
(Ω)
VSUPPLY
(V)
VSUPPLY
(V)
Supported Charging ConfigurationsOper. Temp.
(°C)
Package/Pins
minmaxtypminmax
MAX16971 Yes15003000Yes10Resistor0.0224.755.5
BC1.2
iPod/iPhone
-40 to +105
QSOP-CU/16
TQFN-CU/16

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

MAX16971EVKIT: Evaluation Kit for MAX16970/MAX16971
Request Reliability Report for: MAX16970 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX15162
8V to 60V Smart Dual 1.5A Circuit Breaker with Accurate Current Monitoring

  • 8V to 60V Wide Input Voltage Range
  • Integrated Dual-Power MOSFET 
  • Turn-On Resistance 140mΩ (WLP), 180mΩ (TQFN) MOSFET

MAX16543
Integrated Protection IC on a High-Power 12V Bus with an Integrated MOSFET and Lossless Current Sensing

  • Used with the MAX16545B/MAX16545C to Provide Integrated Protection for Loads > 60A On 12V Bus
  • High Density: Industry’s Smallest Circuit Breaker Solution Provides More Than 75% Board Area Savings
  • Lossless, Precise Total System Current Sensing and Reporting

MAX16545B
Integrated Protection IC on 12V Bus with an Integrated MOSFET, Lossless Current Sensing, and PMBus Interface

  • High Density (6.5mm × 4mm for 60A): Less than 25% of the Board Area of Conventional Solutions
  • Enables Advanced System Power Management

MAX16545C
Integrated Protection IC on 12V Bus with an Integrated MOSFET, Lossless Current Sensing, and PMBus Interface

  • High Density (6.5mm × 4mm for 60A): Less than 25% of the Board Area of Conventional Solutions
  • Enables Advanced System Power Management