/
/
/
Power Protection and Control 
/
Complete System Power Protection IC
/
Top ![]()
MAX16171
Ideal Diode Controller with Reverse-Current Protection
Fastest Reverse Polarity Protection IC to Efficiently Protect Your Automotive System
MyMaxim SubscriptionsProduct Details
Key Features
Applications/Uses
Parametric specs for Ideal Diodes
| Package/Pins | TDFN-CU/8 |
| Budgetary Price (See Notes) | 0.96 |
Parametric specs for Overvoltage Protection Controllers
| VIN (V) (min) | 4 |
| VIN (V) (max) | 57-76 |
| VGATE (V) | 9 |
| tGATE (On) (ms) | 0.12 |
| Oper. Temp. (°C) | -40 to +125 |
| Package/Pins | TDFN-CU/8 |
View Less
Simplified Block Diagram
Technical Docs
| Data Sheet | Ideal Diode Controller with Reverse-Current Protection | Jun 07, 2021 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Parameters
Parametric specs for Ideal Diodes
| Package/Pins | TDFN-CU/8 |
| Budgetary Price (See Notes) | 0.96 |
Parametric specs for Overvoltage Protection Controllers
| VIN (V) (min) | 4 |
| VIN (V) (max) | 57-76 |
| VGATE (V) | 9 |
| tGATE (On) (ms) | 0.12 |
| Oper. Temp. (°C) | -40 to +125 |
| Package/Pins | TDFN-CU/8 |
Key Features
- -42V to +76V Protection Range
- Relaxes TVS Diodes Requirements
- 4V to 57V Operating Range
- Accommodates Wide Automotive Supply Rails
- 9V Gate Drive Voltage with Respect to SRC
- Reduces MOSFET Power Dissipation
- Enable Input
- Provides On-the-Fly System Control
- 1µA Shutdown Current
- Extends Battery Life
- 600ns Reverse-Current Blocking Time with 10mV Overdrive
- Extends System Operation Time During Power Interruption
- -40°C to +125°C Automotive Temperature Range
- 2mm x 3mm, Side-Wettable TDFN Package
Applications/Uses
- Automotive Power Systems
- Network Telecom Power Systems
- RAID Systems
- Redundant Power Supplies
- Servers
Description
The MAX16171 is an ideal diode controller that protects the load against damaging automotive transients down to -42V and blocks reverse-current flow within 600ns. The MAX16171 operates over a wide supply voltage range of 4V to 57V and withstands input transients up to 76V. In light load applications, the device regulates the voltage drop across the external MOSFET to 20mV, allowing smooth, ring-free operation. At heavy load, the charge pump drives the gate of the external MOSFET into an enhanced mode of operation and significantly improves efficiency and power dissipation compared to traditionally used Schottky diodes.
The MAX16171 consumes only 1μA of current during shutdown mode (VEN = GND) to extend battery life while providing standby power to the load through the body diode of the external MOSFET. An internal 2.5MΩ resistor between GATE and SRC keeps the external MOSFET off when the input voltage drops below ground.
The MAX16171 is available in a tiny 2mm x 3mm x 0.75mm, 8-pin TDFN package with side-wettable flanks and operates over the -40°C to +125°C automotive temperature range.
The MAX16171 consumes only 1μA of current during shutdown mode (VEN = GND) to extend battery life while providing standby power to the load through the body diode of the external MOSFET. An internal 2.5MΩ resistor between GATE and SRC keeps the external MOSFET off when the input voltage drops below ground.
The MAX16171 is available in a tiny 2mm x 3mm x 0.75mm, 8-pin TDFN package with side-wettable flanks and operates over the -40°C to +125°C automotive temperature range.
Simplified Block Diagram
Technical Docs
| Data Sheet | Ideal Diode Controller with Reverse-Current Protection | Jun 07, 2021 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Request a Quote