MAX14738EVKIT

Evaluation Kit for the MAX14738 and MAX14739


Please check latest availability status for a specific part variant.

Description

The MAX14738/MAX14739 evaluation kit (EV kit) is a fully assembled and tested circuit board that demonstrates the functionality of the MAX14738/MAX14739 overvoltage protection (OVP) devices.

Key Features

  • Evaluates Overvoltage Protection
  • Allows User-Setting of OVLO Voltage
    • Jump to Ground to Use Internal Setting
    • 1MΩ Resistor and 500kΩ Potentiometer Resistive-Divider Allows Variable OVLO Voltage
  • Test Points at Every Voltage Pin for Easy Measurements
  • Fully Assembled and Tested

Applications/Uses

  • Mobile Internet Devices
  • Smartphones
  • Tablet PCs
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX15162
8V to 60V Smart Dual 1.5A Circuit Breaker with Accurate Current Monitoring

  • 8V to 60V Wide Input Voltage Range
  • Integrated Dual-Power MOSFET 
  • Turn-On Resistance 140mΩ (WLP), 180mΩ (TQFN) MOSFET

MAX16543
Integrated Protection IC on a High-Power 12V Bus with an Integrated MOSFET and Lossless Current Sensing

  • Used with the MAX16545B/MAX16545C to Provide Integrated Protection for Loads > 60A On 12V Bus
  • High Density: Industry’s Smallest Circuit Breaker Solution Provides More Than 75% Board Area Savings
  • Lossless, Precise Total System Current Sensing and Reporting

MAX16545B
Integrated Protection IC on 12V Bus with an Integrated MOSFET, Lossless Current Sensing, and PMBus Interface

  • High Density (6.5mm × 4mm for 60A): Less than 25% of the Board Area of Conventional Solutions
  • Enables Advanced System Power Management

MAX16545C
Integrated Protection IC on 12V Bus with an Integrated MOSFET, Lossless Current Sensing, and PMBus Interface

  • High Density (6.5mm × 4mm for 60A): Less than 25% of the Board Area of Conventional Solutions
  • Enables Advanced System Power Management